• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.98-101
• /
• 2012

I studied the stability of organic photovoltaic cells in terms of P3HT:PCBM-71 blend ratio as a function of storage time. I obtained the best cell performance by optimizing the blend ratio of electron donor and electron acceptor within the active layer. In this study, I found that the more the P3HT:PCBM ratio increases within the active layer, the more the cell efficiency decreases as the storage time increases. As a result, the best optimized blend ratio was the 1:0.6 ratio of P3HT:PCBM-71, and cell efficiency of the device with the 1:0.6 blend ratio was 4.49%. The device with the best cell efficiency showed good stability.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1433-1439
• /
• 2014

We report on the influence of water as an electrolyte on the photovoltaic performances. The photovoltaic performance was shown to be quite sensitive to the substituent on the donor group. An optimized efficiency of 4.41% in the presence of 100% water content using $I^-/I{_3}^-$ redox couple was obtained using the D21L6 organic dye.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.150-153
• /
• 2005

반도체성 고분자인 poly(3-hexylthiophene) (P3HT)과 $C_{60}$ 유도체인 PCBM의 복합재를 이용하여 유기태양전지를 제작하였다. 열처리 온도론 중심으로 다양한 제조조건 하에서의 태양전지 특성을 조사하였다. 열처리 온도를 높임에 따라, P3HT/PCBM 복합재 박막은 뚜렷한 색변화와 함께 가시광 영역에서의 광흡수가 증가됨이 관찰되었고, 소자 성능도 크게 향상되었다. 결과적으로, 본 P3HT/PCBM bulk 이종접합형 구조의 유기 태양전지는 최적화된 제조 조건에서 $2.8\%$의 에너지 전환 효율을 나타내었다($100mW/cm^2$, 백색광).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.61-62
• /
• 2008

최근 유가 상승의 영향으로 많은 연구자들의 관심이 풍부하고 무한한 태양에너지의 활용에 많은 관심이 쏟아지고 있다. 하지만 현재 상용화된 실리콘 태양전지는 실리콘의 정제 및 제조 단가가 생산 비용에 많은 부분을 차지하여 시장진입에 어려움을 겪고 있다 또한 실리콘의 생산과 가공이 반도체나 디스플레이 분야에서도 반드시 필요하기 때문에 그에 따른 생산량이 전체 소비를 따라 가지 못하여 나타나는 공급 부족 현상도 상당 기간 지속 되었다. 이러한 상황에서 실리콘을 대처할만한 태양전지의 개발과 함께 휴대성이 뛰어난 태양전지의 개발이 많은 관심을 끌고 있다. 본 연구에서는 기존의 유기 태양전지에 CNT를 혼합한 유무기 하이브리드 태양전지를 제조하고 그에 따른 광학적 특성과 전기적 특성을 살펴보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.119.1-119.1
• /
• 2011

Since Gratzel et al. reported the first efficient dye-sensitized solar cells(DSSCs) in 1991, they have attracted much attention due to their relatively high power conversion efficiency and potentially low cost production. To date, high performance and good stability of DSSC based on Ru-dyes as a photosensitizer had been widely addressed in the literatures. However, the Ru-dyes are facing the problem of manufacturing costs and environmental issues. In order to obtain even cheaper photosensitizers for DSSC, the metal-free organic photosensitizers are strongly desired. The metal-free organic dyes offer superior molar extinction coefficients, low cost, and diverse molecular structures as compared to the conventional Ru-dyes, In this work, we have studied on the synthesis and characterization of the organo dendritic dyes containing different number of electron acceptor moieties in a molecule.

• 전기화학회지
• /
• 제20권1호
• /
• pp.18-25
• /
• 2017

본 총설에서는 최근 전세계적으로 각광 받고 있는 유기 금속 할라이드 페로브스카이트 소재에 기반한 태양광 물분해 연구에 대해 정리하였다. 크게, 현재까지 연구보고들을 태양전지-전기분해기 구성 (photovoltaic-electrolyzer configuration) 및 통합 태양광 물분해 (integrated photoelectrolysis)로 분류하여 최근 연구결과들을 소개하였다. 해당 분야 연구는 아직 초기 단계에 있으며, 향후 효과적인 보호막 개발, 고전압 텐덤전지 제작 등이 필요함을 보였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.378-381
• /
• 2015

To produce low cost and efficient photovoltaic cells, inorganic-organic lead halide perovskite materials appear promising for most suitable solar cells owing to their high power conversion efficiency. Most recent research showes that formamidinium lead iodide ($FAPbI_3$) with methylammonium lead bromide ($MAPbBr_3$) improves the power conversion efficiency of the solar cell to more than 18 per cent under a standard illumination because incorporated $MAPbBr_3$ makes $FAPbI_3$-relatively unstable but comparatively narrow band gap-more stable composition. In respect to first principle study, we investigated band gap of $MAPbI_3$, $FAPbI_3$, $MAPbBr_3$, $(FAPbI_3)_{0.89}-(MAPbBr_3)_{0.11}$ and 0.615(eV), 0.466, 1.197, 0.518 respectively through EDISON DFT software. These results emphasize enhancing structure stability is important factor as well as finding narrow band gap.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.11.1-11.1
• /
• 2009

Bulk-heterojunction type organic photovoltaic cells have been remarkably improved due to the development of efficient donors and post treatment process. However, most of researchers have studied on the OPVs using spin-coating method during the past decade. To commercialize the OPVs, much cheaper printing process should be developed such as inkjet, screen, gravure, and so on. In this study, we have focused on the development of printing technology using Inkjet and Aerosol-Jet printing, which can offer reliable device performance. Finally, 4.5% power conversion efficiency can be achieved under AM 1.5 1sun light illumination, which is the highest value in printed OPVs. We reveal that substantial improvement can be realized by highly efficient bulk heterojunction after printing. Also, we can confirm these two printing methods are promising fabrication methods for large area OPVs. Also, flexible and large area (18 cm2) printed OPVs have been fabricated and device performance will be discussed in detail.

• Current Photovoltaic Research
• /
• 제5권3호
• /
• pp.69-74
• /
• 2017

Here we report the influence of thermal treatment on the performance of high efficiency polymer solar cells with the bulk heterojunction films of poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b'] dithiophene-alt-3-fluorothieno[3,4-b]thiophene-2-carboxylate] (PTB7-Th) and [6,6]-phenyl $C_{71}$ butyric acid methyl ester ($PC_{71}BM$). The crystalline nanostructure of PTB7-Th:$PC_{71}BM$ layers, which were annealed at three different temperatures, was investigated by employing synchrotron radiation grazing incidence X-ray diffraction (GIXD) technique. Results showed that the device performance was slightly reduced by thermal annealing at $50^{\circ}C$ but became significantly poor by thermal annealing at $100^{\circ}C$. The poor device performance by thermal annealing was attributed to the collapse in the crystalline nanostructure of PTB7-Th in the PTB7-Th:$PC_{71}BM$ layers as evidenced by the GIXD measurements that exhibited huge reduction in the intensity of PTB7-Th (100) peak even at $50^{\circ}C$.

• 폴리머
• /
• 제34권1호
• /
• pp.84-87
• /
• 2010

구리, 인디움, 셀레늄 이온을 포함한 혼합물을 전기화학적으로 환원하는 1회 반응으로 CIS 입자를 합성하였다. 합성된 입자를 폴리(옥틸티오펜/풀러렌으로 구성된 벌크이종접합에 블렌딩하거나 박막층으로 삽입하여 여러 가지 광기전셀을 제조하였다. CIS의 함량이 증가할수록 개방전압과 단락전류의 급격한 감소가 일어났다. 이러한 광기전성의 감소현상을 블렌드의 구조, 조성, 모폴로지를 분석 해석하였다.