• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.11a
• /
• pp.118-120
• /
• 2004

• Proceedings of the Membrane Society of Korea Conference
• /
• 2000.11a
• /
• pp.127-130
• /
• 2000

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.11-11
• /
• 2004

Under the coordination of GKSS a new European project in the field of membrane development started recently. This project focuses on the development of novel nanostructured materials for selective material transport and separation. Two classes of materials will be developed in this project: nanostructured organic/inorganic hybrid materials and functional self-organized supramolecular copolymers.(omitted)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.114-118
• /
• 2005

• Environmental Engineering Research
• /
• v.16 no.3
• /
• pp.149-157
• /
• 2011

Nanofiltration (NF) experiments were conducted to investigate fouling of Al-hydroxide precipitate and the influence of organic compound, inorganic compound, and their combination, i.e., multiple foulants. $CaCl_2$ and $MgSO_4$ were employed as surrogates of inorganic compounds while humic acid was used as surrogate of organic compound. The flux attained from NF experiments was fitted with the mathematical fouling model to evaluate the potential fouling mechanisms. Al-hydroxide fouling with a cake formation mechanism had little effect on the NF membrane fouling regardless of the Al concentration. The NF fouling by Al-hydroxide precipitate was deteriorated in presence of inorganic matter. The effect of Mg was more critical in increasing the fouling than Ca. This is because the Mg ions enhanced the resistances of the cake layer accumulated by the Al-hydroxide precipitate on the membrane surfaces. However, the fouling with Mg was dramatically mitigated by adding humic acid. It is interesting to observe that the removal of the conductivity was enhanced to 61.2% in presence of Mg and humic acid from 30.9% with Al-hydroxide alone. The influence of dissolved matter (i.e., colloids) was more negative than particulate matter on the NF fouling for Al-hydroxide precipitate in presence of inorganic and organic matter.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.237-240
• /
• 2000

Organic acids which were produced from biomass wastes streams by cell-recycle fermentation using Propionibacterium acidipropionici ATCC 4965 were extracted by Membrane Contactor using TOA/MIBK system. Maximum productivity was 3.32g organic acid/L/hr at the dilution rate of 0.2/hr in the results of continuous fermentation. The diluted organic acids in the fermenter were selectively separated by Membrane Contactor extraction using 30%(w/w) trioctylamine(TOA) dissolved in methylisobutylketone(MIBK). The flow rate of aqueous phase is 200ml/min and that of extraction phase is 100ml/min. The degree of Acetic acid and Propionic acid extraction from fermentation broth was reached 56.25%, 72.41% respectively.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.367-382
• /
• 2022

Numerous metal-organic frameworks (MOFs) produced by periodic combinations of organic ligands and metal ions or metal-oxo clusters have led the way for the creation of energy-efficient membrane-based separations that may serve as viable replacements for traditional thermal counterparts. Although tremendous progress has been made over the past decade in the synthesis of polycrystalline MOF membranes, only a small number of MOFs have been exploited in the relevant research. Intercrystalline defects, or nonselective diffusion routes in polycrystalline membranes, are likely the reason behind the delay. Postsynthetic modifications (PSMs) are newly emerging strategies for providing polycrystalline MOF membrane diversity by leveraging advanced membranes as a platform and improving their separation capabilities via physical and/or chemical treatments; therefore, neither designing and developing MOFs nor tailoring membrane synthesis techniques for focused MOFs is necessary. In this minireview, seven subclasses of PSM techniques that have recently been adapted to polycrystalline MOF membranes are outlined, along with obstacles and future directions.

• Membrane Journal
• /
• v.31 no.3
• /
• pp.228-240
• /
• 2021

The organic solvent robust polybenzimidazole (PBI) membranes were prepared as organic solvent nanofiltration (OSN) membrane for the recycling of alcoholic solvents using non-solvent induced phase separation with different dope solution concentration and coagulant composition of water/ethanol mixtures to control the membrane morphology and permeation performance. Investigation on crosslinking of polybenzimidazole indicated that the membrane crosslinked with dibromoxylene (DBX) had enough mechanical strength and solvent resistance to be applied as a OSN membranes. The crosslinked PBI membrane prepared by more than 20wt% dope concentration coagulated in water showed a rejection of > 90% to Congo Red (MW of 696.66 g/mol) while pure ethanol permeances was more than 22.5 LMH/bar at 5 bar. Investigation on coagulant composition indicated that ethanol permeance through crosslinked PBI OSN membrane increased with increasing of ethanol concentration in water/ethanol mixture coagulants.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.04a
• /
• pp.35-36
• /
• 1992

화학반응이 주로 고온에서 일어나기 때문에 polymer membrane의 화학반응에의 적용은 거의 없었으며, 연구의 대부분은 열적 안정성이 좋은 inorganic membrane reactor에 대하여 이루어져 왔다. 산 및 산화환원 촉매로써의 12-텅스토인산은 반응물의 종류에 따라 특이한 흡착 특성을 보이며, 헤테로폴리산만이 지니는 특징적인 surface, bulk 특성 때문에 바능물의 종류에 따라 반응은 촉매의 surface and/or bulk에서 일어난다. 무기 축합산인 12-텅스토인산이 지니는 또 하나의 특징은 물, 알콜, ether 같이 산소를 포함하는 organic solvent에 매우 잘 녹는다는 사실이다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.03a
• /
• pp.77-102
• /
• 2004

Carbon materials obtained from organic polymers are usually amorphous structure. The structure of carbon materials is not nearly as well defined as that of zeolite. Carbon are amorphous materials with comparatively wide pore size distribution as compared to the crystalline zeolites with monodisperse ultramicropore and micropore dimensions. (omitted)