• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.977-979
• /
• 2006

Organic light-emitting diodes (OLEDs) based on the double wide band gap emissive layers in the range of 380 nm to 440 nm are reported. An efficient electroluminescence with a maximum at 400nm was observed at room temperature under a forward bias about 10V. With the wide band gap organic materials for near-ultraviolet emission, the low operating voltage (5V) and high current efficiency (3 cd/A) have been obtained at $2mA/cm^2$

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.831-834
• /
• 2000

Characteristics of organic light-emitting diodes(OLEDs) were studied with devices made by PECCP[poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] Langmuir-Blodget(LB) films. The emissive organic material was synthesized and named PECCP, which has a strong electron donor group and an electron accepter group in main chain repeated unit. The LB technique was employed to investigate the identification of the recombination zone in the ITO/PECCP LB films/Alq$_3$/Al structure by varying the LB film thickness. PECCP was considered as an emissive layer and Alq$_3$was used as an electron-transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum, and EL spectrum of those devises.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.159-162
• /
• 2009

Surface lighting using OLEDs for desk/task lighting has been analyzed its electrical and optical characteristic with a fluorescent lamp which has triple wavelength peak. We have confirmed the good possibility of OLEDs for desk/task lighting. Our engineering sample which has fabricated by co-worker has its characteristics which are luminous efficacy 11.781m/W at 509mW, CRI Index 75, CCT 4479K, CRI coordinate x=0.378, y=0.4547, respectively. Addinationly another OLEDs samples are used for compartive analysis in view of desk/task lighting.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.181-184
• /
• 2012

We report, for the first time, operation frequency dependence of current density-voltage ($J_{OLED}-V_{OLED}$) shift for multi-layer organic light-emitting diodes (OLEDs). When the OLEDs were electrically stressed for 21 hours with 50% duty voltage pulses at 60, 120, 240, and 360 Hz, the JOLED-VOLED shifts were suppressed by half for 360 Hz operation compared with 60 Hz operation, but with little change in emission efficiencies. This frequency dependent $J_{OLED}-V_{OLED}$ shift is believed to be commonly observed for typical multi-layer OLEDs and can be used to further improve lifetime of digitally-driven active-matrix OLED displays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.409-410
• /
• 2008

We studied dielectric properties of Organic Light-emitting Diodes(OLEDs) depending on applied voltage of AF(Amorphous Polytetrafluoroethylene), material of hole injection layer in structure of ITO/hole injection layer (AF)/Al. AF is deposited 5 [nm] as deposition rate of 0.1~0.2 [$\AA$/s] in high vacuum of $5\times10^{-6}$ [Torr]. In result of these studies, we can know dielectric properties of OLEDs. The impedance decreases as the applied voltage increases and the Cole-Cole plots of devices are decreases as the applied voltage increases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.507-508
• /
• 2007

Temperature-dependent current-voltage characteristics of Organic Light-Emitting Diodes(OLEDs) were studied. The OLEDs were based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-diphenyl-4,4'-diamine (TPD) as a hole transport and tris(8-hydroxyquinoline) aluminum($Alq_3$) as an electron transport and emissive material. The current-voltage characteristics were measured in the temperature range of 10[K] and 300[K]. A conduction mechanism in OLEDs was interpreted in terms of tunneling and trap-filled limited current.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2361-2365
• /
• 2007

Temperature-dependent current-voltage characteristics of Organic Light-Emitting Diodes(OLEDs) were studied. The OLEDs were based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3- methylrhenyi)-1,1'-diphenyl-4,4'-diamine (TPD) as a hole transport and tris(8-hydroxyquinoline) aluminum(Alq3) as an electron transport and emissive material. The current-voltage characteristics were measured in the temperature range of 10[K] and 300[K]. A conduction mechanism in OLEDs was interpreted in terms of tunneling and trap-filled limited current.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1416-1418
• /
• 2005

A new DCM derivative containing a phenothiazine moiety, 4-(dicyanomethylene)-2-t-butyl-6-(9-ethylphenothiazine-2- enyl)-4H-pyran (DCPTZ), has been synthesized as an orange-red fluorescent dye molecule for organic lightemitting diodes (OLEDs). EL devices with the structure of $ITO/PEDOT-PSS/{\alpha}-NPD/Alq_3:DCPTZ/Alq_3/LiF/Al$ have been fabricated with changing the doping concentration of the DCPTZ. Maximum EL spectra of the devices ranged from $580{\sim}620$ nm depending on the doping concentration of the dye molecule. An EL device with 0.5 % doping concentration showed CIE coordinate (0.51, 0.47) at luminance of 100 $cd/m^2$. White light-emitting devices with the structure of $ITO/PEDOT-PSS/{\alpha}-NPD/{\alpha}-NPD:DCPTZ/DPVBi/Alq_3/$ LiF/Al have been also fabricated. The thickness of blue light-emitting 1,4-bis(2,2- diphenylvinyl)benzene (DPVBi) layer was changed to obtain a white light-emission. A white light-emission from the device was observed when the thickness of the DPVBi layer became thicker than 10 nm.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.11-14
• /
• 2007

For the fabrication of blue color organic light emitting diodes(OLED) with a high performance, 2-TNATA [4,4',4"-tris (2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB [N,N'-bis (1-naphthyl) -N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (indium tin oxide)/glass substrate by the vacuum thermal evaporation. After then, blue color emission layer was deposited using TPM-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl)phosphonate] and GDI602 as a light emitting organic material. Finally, the two kinds of OLEDs with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al and ITO/2-TNATA/NPB/GDI602/Alq_3/LiF/Al$ were prepared by in-situ deposition. The maximum current density and luminance were found to be about $588\;mA/cm^2\;and\;5239\;cd/m^2$ at 12V for the OLED sample with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al$. Color coordinate of blue OLED was x=0.18, y=0.18 (at llV) and the maximum current efficiency was 2.82 cd/A (at 6V) with the peak emission wavelength of 440 nm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.106-112
• /
• 2010

In order to compete with other flat display devices such as Liquid Crystal Displays (LCDs) and organic light emitting diodes (OLEDs), Plasma Display Panels (PDPs) require to have high performances like high image quality, low power consumption and high speed driving. In this paper, Fe doped MgO protective layer was introduced for higher performance. Both the surface characteristics of the deposited thin films and the electro-optical properties of 4 inch test panels were investigated. It has been demonstrated experimentally that ac PDP with Fe doped MgO protective layer has lower discharge voltage than that of undoped MgO film, which corresponds to measured secondary electron emission coefficients. The crystallinity and surface roughness of thin films were determined by XRD patterns and AFM images. In addition, ac PDP with Fe doped MgO protective layer has improved address discharge time lag for high speed driving.