• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1745-1750
• /
• 2013

A novel green aqueous mobile phase modified with room temperature ionic liquids (RTILs) was employed in the absence of volatile organic solvents or ion-pairing reagents to analyze thiamine, a very polar compound, by reverse phase high performance liquid chromatography (RP-HPLC). Due to its strongly hydrophilic nature, thiamine was eluted near the column dead time ($t_0$) using a mobile phase without adding RTILs or ion-pairing reagents, even if a 100% aqueous mobile phase, which has weak elution power under reverse phase conditions, was used. Thus, 1-ethyl-3-methyl-imidazolium hexafluorophosphate ([EMIM][$PF_6$]), which has the strongest chaotropic effect, was selected as a mobile phase additive to improve retention and avoid baseline disturbances at $t_0$. Various mobile phase parameters such as cation moiety, chaotropic anion moiety, pH and concentration of RTILs were optimized to determine thiamine at the proper retention time. Method validation was performed to assess linearity, intra- and inter-day accuracy and precision, recovery and repeatability; all results were found to be satisfactory. The developed method was also compared to the current official United States Pharmacopoeia (USP) and Korean Pharmacopoeia (KP) methods using an organic mobile phase containing an ionpairing reagent by means of evaluating various chromatographic parameters such as the capacity factor, theoretical plate number, peak asymmetry and tailing factor. The results indicated that the proposed method exhibited better efficiency of thiamine analysis than the official methods, and it was successfully applied to quantify thiamine in pharmaceutical preparations.

• 한국전기전자재료학회논문지
• /
• 제31권3호
• /
• pp.129-134
• /
• 2018

Herein, we report the manufacture of high-performance, ambipolar organic field-effect transistors (OFETs) and complementary-like electronic circuitry based on a blended, polymeric, semiconducting film. Relatively high and well-balanced electron and hole mobilities were achieved by incorporating a small amount of ionic additives. The equivalent P-channel and N-channel properties of the ambipolar OFETs enabled the manufacture of complementary-like inverter circuits with a near-ideal switching point, high gain, and good noise margins, via a simple blanket spin-coating process with no additional patterning of each active P-type and N-type semiconductor layer.

• 대한환경공학회지
• /
• 제33권8호
• /
• pp.578-582
• /
• 2011

호기성 소화를 통해 안정화된 유기성 슬러지는 질소 비료로서 활용될 수 있는 잠재력이 있다. 본 연구에서는 식품공장 폐수 처리장에서 발생한 슬러지를 호기성 소화한 후, 소화액의 비효효과를 오이 생장을 통해 평가하였다. 공기 공급량을 200 mL/L/min까지 증가시킬 경우, 질산화와 비효효과가 향상됨을 확인하였다. 또한 일반 비료에 비해 슬러지 내 함유량이 부족한 칼륨 등을 보충하기 위해 음식물 쓰레기의 일종인 계란 껍질 가루를 시비 시 함께 투여하여, 식물 생장이 향상됨을 확인하였다. 본 논문에서 제시하는 적정 공기 공급량과 저가의 첨가제 투여는 슬러지 액비의 품질을 보장하는데 활용될 수 있을 것으로 사료된다.

• 한국유기농업학회지
• /
• 제20권1호
• /
• pp.91-99
• /
• 2012

This study was conducted to develop a functional feed additive for pig with spent $Lycium$ $chinense$ Mill fruit. We investigated the optimum conditions for the extraction of polyphenol from spent $Lycium$ $chinense$ Mill using methanol. Methanol concentration as a solvent for extraction, extraction time and the volume of solvent per a gram of solid (ground spent Lyceum chinense Mill) were selected as parameters. Three levels of parameters were configured according to Box Behnken experiment design, a fractional factorial design, and total 15 trials were employed. Total polyphenol concentration from each trial was used as response from experiment system and effects of parameters on total polyphenol extraction efficiency were determined using response surface model. As a result, all terms in analysis of variance, regression ($p$ = 0.001), linear ($p$ = 0.002), square ($p$ = 0.017) and interaction ($p$ = 0.047) was significant and adjusted determination coefficient ($R^2$) was 94.7%. Total polyphenol extraction efficiency was elevated along increased methanol content and decreased solvent to solid ratio. However extraction time did not affect the efficiency. This study provides a primary information for the optimum extraction conditions to maximize total polyphenol recovery from spent Lycium chinens Mill fruit and this result could be applied to re-use of argo-industrial by-products and to develop of functional feed additives in organic farming.

• 지질공학
• /
• 제1권1호
• /
• pp.11-18
• /
• 1991

본 고는 특정 흙에서의 가설 흙막이용 SCW의 미경화현상 원인을 실험적으로 규명하며 성공적으로 현장 시공한 사례를 소개하고자 한다. 시험은 현장 흙을 채취하여 현장 배합비와 변경된 배합비 및 특정약액의 추가에 따른 SCW의 강도특성 변화를 실내 측정하였다. 그 결과 SCW 미경화 현상의 원인은 현장의 유기질토에 기인된 것으로 나타났으며, 이에 대한 대책으로 염화칼슘 2% 첨가시 가장 효과적인 것으로 나타났다. 그러나 염화칼슘의 배합비르 4%, 6%로 증가시킨 경우에는 오히려 강도가 저하되는 특이한 현상을 나타내었다. 또한 pH가 13이 되도록 NaOH를 첨가한 경우에는 오히려 강도가 저하하였고, NaSiO$_2$를 첨가한 경우는 조기 강도는 어느 정도 발현된 반면, 장기 강도는 감소되는 현상을 보였다.

• Journal of Microbiology and Biotechnology
• /
• 제26권6호
• /
• pp.1067-1076
• /
• 2016

The gene encoding lipase (Lip98) from Aeromicrobium sp. SCSIO 25071 was cloned and functionally expressed in Escherichia coli. Lip98 amino acid sequence shares the highest (49%) identity to Rhodococcus jostii RHA1 lipase and contains a novel motif (GHSEG), which is different from other clusters in the lipase superfamily. The recombinant lipase was purified to homogeneity with Ni-NTA affinity chromatography. Lip98 showed an apparent molecular mass of 30 kDa on SDS gel. The optimal temperature and pH value for enzymatic activity were recorded at 30℃ and 7.5, respectively. Lip98 exhibited high activity at low temperatures with 35% maximum activity at 0℃ and good stability at temperatures below 35℃. Its calculated activation energy was 4.12 kcal/mol at the low temperature range of 15-30℃. Its activity was slightly affected by some metal ions such as K⁺, Ca²⁺, and Na⁺. The activity of Lip98 was increased by various organic solvents such as DMSO, ethanol, acetone, and hexane with the concentration of 30% (v/v) and retained more than 30% residual activity in neat organic solvent. The unique characteristics of Lip98 imply that it is a promising candidate for industrial application as a nonaqueous biocatalyst and food additive.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.130-137
• /
• 1997

Intumescent inorganic and organic coatings which dintr one from the other by the type of gas formers and the mechanisms of foam formation have been obtained and investigated. Inorganic intumescent coatings are the compositions based on water glass and mineral additives with different dispersity. Mineral additives contain adsorbed and absorbed water and carbonates which are destructed with the carbon dioxide and water evolution during the flame action on coating. The decreasing of mineral additives particle sizes under the mechanical milling with the fraction precipitation promotes the foam coke formation with less defects. Here the main structure of comparing compositions does not change. In organic coatings based on epoxy-polymers the polyammonium phosphate additive is used. It is the cabonization catalyst and the foam agent. The polyammonium phosphate of various dispersity employed is uniformly distributed on the polymeric matrix. The decreasing of the particle sizes leads to the increasing of the fire resistant properties of the intumescent coa-ting. The fire resistant analysis of the coating during more than an hour: the coating back side the temperature on plastic or wooden materials does not exceed 423K, and on metal-573K.

• 농업과학연구
• /
• 제46권2호
• /
• pp.285-292
• /
• 2019

This study was done to evaluate the effects of a mixture of essential oils and organic acid supplementation on growth performance, blood profiles, leg bone length and intestinal morphology in Ross broilers. A total of 40 Ross 308 broilers ($1140{\pm}80g$) were randomly allocated to 2 groups, a basal diet (CON) and a basal diet + 0.05% $Avi-protect^{(R)}$ (AVI, Mixture of 25% citric, 16.7 sorbic, 1.7% thymol, and 1.0% vanillin), with 20 replicates for every group and 1 chicken per replicate per cage. The broilers were raised in a temperature-controlled room maintained at $24{\pm}1^{\circ}C$ and $50{\pm}5%$ humidity. The body weight (p < 0.05) and weight gain (p < 0.05) of the broilers were increased in the AVI group compared with the CON group. The triglyceride (p < 0.05) and low density lipoprotein (LDL) (p < 0.05) contents were significantly decreased in the AVI group compared with the CON group. There was no significant difference in the leg bone length between the AVI and CON groups (p > 0.05). The villi height (p < 0.05) and goblet cell count (p < 0.05) were significantly increased in the AVI group compared with the CON group. In conclusion, $Avi-protect^{(R)}$ as a feed additive improved the growth performance and lipid metabolism and promoted the development of the intestinal morphology of broilers.

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.153-162
• /
• 2022

Objectives: Fused deposition modeling (FDM) 3D printer which is one of the material extrusion (MEX) technologies is an additive manufacturing (AM) process. 3D printers have been distributed widely in Korea, particularly in school and office, even at home. Several studies have shown that nanoparticles and volatile organic compounds (VOCs) were emitted from an FDM 3D printing process. The objective of this study was to identify types of chemicals possibly emitted from FDM 3D printing materials such as PLA (polylactic acid), ABS (acrylonitrile butadiene styrene), nylon, PETG (polyethylene terephthalate glycol), PVA (polyvinyl alcohol), PC (polycarbonate) filaments. Methods: 19 FDM 3D printing filaments which have been distributed in Korea were selected and analyzed VOCs emitted of 3D printing materials by headspace gas chromatography mass spectrometry (headspace GC-MS). Subsamples were put into a vial and heated up to 200℃ (500 rpm) during 20 minutes before analyzing FDM 3D printing filaments. Results: In the case of PLA filament, lactide and methyl methacrylate, the monomer components of one, were detected, and the volume ratio ranged 27~93%, 0.5~37% respectively. In the case of ABS filaments, styrene (50.5~59.1%), the monomer components of one, was detected. Several VOCs among acetaldehyde, toluene, ethylbenzene, xylene, etc were detected from each FDM 3D printing filaments. Conclusions: Several VOCs, semi-VOCs were emitted from FDM 3D printing filaments in this study and previous studies. Users were possibly exposed to ones so that we strongly believe that we recommend to install the ventilation system such as a local exhaust ventilation (LEV) when they operate the FDM 3D printers in a workplace.

• 멤브레인
• /
• 제33권3호
• /
• pp.137-147
• /
• 2023

본 연구에서는 현탁중합을 통해 이온교환입자를 합성하였다. 또한 음이온 교환막을 제조하기 위해 brominated poly(phenylene oxide) (Br-PPO)로 교환막 합성을 진행하였으며, 합성한 이온교환입자를 Br-PPO에 첨가하여 음이온 교환막에 성능을 향상시키고자 하였고, 이를 적용하여 음이온 교환막 연료전지 시스템의 성능 평가를 진행했다. 이온교환입자는 FT-IR, TGA 및 UTM을 통해 구조 분석, 열적 기계적 특성을 평가하였다. Br-PPO는 NMR을 통해 화학적 구조 분석 및 합성여부를 확인하였고, 음이온 교환막 연료 전지 셀 테스트를 진행하기 전 이온전도도와 이온교환용량, 팽윤도 및 수분함수율을 측정해 연구되고 있는 다른 음이온 교환막들과 비교를 통해 성능을 평가했다. 최종적으로 가장 성능이 우수했던 이온교환입자를 0.7 wt%를 첨가한 Br-PPO-TMA- SDV 음이온 교환막을 연료전지 시스템에 도입하여 상용 막인 FAA-3-50과 성능을 비교했다.