Browse > Article
http://dx.doi.org/10.15269/JKSOEH.2022.32.2.153

Evaluation for Volatile Organic Compounds (VOCs) Emitted from Fused Deposition Modeling (FDM) 3D Printing Filaments  

Kim, Sungho (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency)
Park, Hae Dong (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency)
Chung, Eunkyo (Department of industrial safety and health, Osan University)
Publication Information
Journal of Korean Society of Occupational and Environmental Hygiene / v.32, no.2, 2022 , pp. 153-162 More about this Journal
Abstract
Objectives: Fused deposition modeling (FDM) 3D printer which is one of the material extrusion (MEX) technologies is an additive manufacturing (AM) process. 3D printers have been distributed widely in Korea, particularly in school and office, even at home. Several studies have shown that nanoparticles and volatile organic compounds (VOCs) were emitted from an FDM 3D printing process. The objective of this study was to identify types of chemicals possibly emitted from FDM 3D printing materials such as PLA (polylactic acid), ABS (acrylonitrile butadiene styrene), nylon, PETG (polyethylene terephthalate glycol), PVA (polyvinyl alcohol), PC (polycarbonate) filaments. Methods: 19 FDM 3D printing filaments which have been distributed in Korea were selected and analyzed VOCs emitted of 3D printing materials by headspace gas chromatography mass spectrometry (headspace GC-MS). Subsamples were put into a vial and heated up to 200℃ (500 rpm) during 20 minutes before analyzing FDM 3D printing filaments. Results: In the case of PLA filament, lactide and methyl methacrylate, the monomer components of one, were detected, and the volume ratio ranged 27~93%, 0.5~37% respectively. In the case of ABS filaments, styrene (50.5~59.1%), the monomer components of one, was detected. Several VOCs among acetaldehyde, toluene, ethylbenzene, xylene, etc were detected from each FDM 3D printing filaments. Conclusions: Several VOCs, semi-VOCs were emitted from FDM 3D printing filaments in this study and previous studies. Users were possibly exposed to ones so that we strongly believe that we recommend to install the ventilation system such as a local exhaust ventilation (LEV) when they operate the FDM 3D printers in a workplace.
Keywords
FDM 3D printer; FDM 3D printing filaments; headspace GC-MS; volatile organic compounds;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Ministry of employment and labor (Moel). Occupational health division. exposure limit values for chemicals and physical agents. (Moel public notice No. 2020-48) 2020. p. 4-70
2 Park JH, Jeon HJ, Oh YS, Park KH, Yoon CS. Understanding three-dimensional printing technology, evaluation, and control of hazardous exposure agents. J Korean Soc of Occup and Environ Hyg. 2018;28(3), 241-256 (http://doi.org/10.15269/JKSOEH.2018.28.3.241)   DOI
3 Steinle P. Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings. J Occup and Environ Hyg. 2016.13(2).121-132 (http://doi.org/10.1080/15459624.5015.1091957)   DOI
4 Stephens B, Azimi PH, Orch ZE, Ramos T. Ultrafine particle emissions from desktop 3D printers. Atmospheric environment. 2013.79.334-339 (http://doi.org/10.1016/j.atmosenv.2013.06.050)   DOI
5 Wohlers T, Campbell I, Diegel O, Huff R, Kowen J et al. Wohlers report 2020. Wohlers associates. 2020. p. 35-48
6 Yi JH, LeBouf RF, Duling MG, Nurkiewicz T, Chen BT et al. Emission of particulate matter from a desktop three-dimensional (3D) printer. J Toxicol and Environ Heal, part A. 2016.79(11): 453-465 (http://doi.org/10.1080/15287394.2016.1166467)   DOI
7 Floyd EL, Wang J, Regens JL. Fume emissions from a low-cost 3-D printer with various filaments. J Occup and Environ Hyg. 2017.14(7).523-533 (http://doi.org/ 10.1080/15459624.2017.1302587)   DOI
8 Stefaniak AB, Lebouf RF, Yi JH, Ham J, Nurkewicz T et al. Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional printer. J Occup and Environ Hyg. 2017.14(7).540-550 (http://doi.org/10.1080/15459624.2017.1302589)   DOI
9 Vance ME, Pegues V, Montfrans SV, Leng W, Marr LC. Aerosol emissions from fuse-deposition modeling 3D printers in a chamber and in real indoor environments. Environ Sci & Technol. 2017.51.9516-9523 (http://doi.org/10.1021/acs.est.7n01546)   DOI
10 Zhang Q, Wong JP, Davis AY, Black MS, Rodney J. Characterization of particle emissions from consumer fused deposition modeling 3D printer. Aerosol Sci and Technol. 2017.51(11).1275-1286 (http://doi.org/10.1080/02786826.2017.1342029)   DOI
11 Jacobsen E, Nielsen IB, Eskesen JS, Lotus GL, Dobel S. Risk assessment of 3D printers and 3D printed products. Minstry of environment and food of Denmark. 2017. p. 30-74 (ISBN: 978-87-93614-00-0)
12 Kim SH, Jung EK, Kim SD. Ultrafine particle, chemical and metal concentration from 3D printers in real 3D printing workplaces. Occuptional safety and health research institute. 2018. p. 60-92
13 Azimi PH, Zhao D, Pouzet C, Crain NE, Stephens B. Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-demensional printers with multiple filaments. Environ Sci & Technol. 2016.50:1260-1268 (http://doi.org/10.1021/acs.est.5b04983)   DOI
14 Kim YN, Yoon CS, Ham SH, Park JH, Kim SH et al. Emissions of nanoparticles and gaseous material from 3D printer. Environ Sci & Technol. 2015.49:12044-12053 (http://doi.org/10.1021/acs.est.5b02805)   DOI
15 Kwon OH, Yoon CS, Ham SH, Park JH, Lee JH et al. Characterization and control of nanoparticle emission during 3D printing. Environ Sci & Technol. 2017.51.10357-10368 (http://doi.org/10.1021/acs/ets.7b01454)   DOI
16 Mendes L, Kangas A, Kukko K, Molgaard B, Saamanen A et al. Characterization of emissions from a desktop 3D printer. J Inst ecol. 2017.21(S1) (http://doi.org/10.1111/jiec.12569)   DOI
17 Kim SH, Chung EK, Kim SD, JH Kwon. Assessment of emitted volatile organic compounds, metals and characteristic of particle in commercial 3D printing service workplace. J Korean Soc of Occup and Environ Hyg. 2020.30(2): 153-162 (http://doi.org/10.15269/JKSOEH.2020.30.2.153)   DOI
18 Stabile L, Scungio M, Buonanno G, Arpino F, Ficco G. Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature. Ind Air. 2017.27.398-408 (http://doi.org/10.1111/ina.12310)   DOI
19 American National Standards Institute (ANSI). Standard method for testing and assessing particle and chemical emissions from 3D printers, 1st ed (ANSI/CAN/UL 2904-2019). 2019. p. 31-42
20 Azimi PH, Fazli TK, Stephens B. Predicting concentrations of ultrafine particles and volatile organic compounds resulting from desktop 3D printer operation and the impact of potential control strategies. J Inst Ecol. 2017.21(S1) (http://doi.org/10.1111/jiec.12578)   DOI
21 Bernatikova S, Dudacek A, Prichystalova, Klecka V, Kocurkova L. Characterization of ultrafine particles and VOCs emitted from a 3D printer. Int J Environ Res and Publ Heal. 2021.18.929 (http://doi.org/10.3390/ijerph18030929)   DOI
22 Carlota V. Is PLA filament actually biodegradable? 3Dnatives. 2019 July (URL: http://3dnatives.com/en/pla-filament-230720194)
23 Digital manufacturing innovation team. 3D printing industry survey report in 2021. National IT industry promotion agency. 2022. p. 1-20
24 Davis A, Black M, Zhang Q, Shan JP, Weber R. Fine particulate and chemical emissions from consumer 3D printers. Environ Sci & Technol. 2019.53(20). 12054-12061 (http://doi.org/10.1021/acs/ets.9b04168)   DOI
25 Dean Lay. VOC emisson factors from 3D printers-ABS (acrylonitrile-butadiene-styrene) type filaments. LSU Master's theses. 2019. p. 120-144
26 Deng YI, Cao SJ, Chen A, Guo Y. The impact of manufacturing papameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction. Build and Environ. 2016.104.311319 (http://doi.org/10.1016.j.buildenv.2016.05.021)   DOI
27 Digital manufacturing innovation team. 3D printing industry survey report in 2020. National IT industry promotion agency. 2021. p. 3-25