• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.321-324
• /
• 2004

This paper presents a package IC containing some components of DC/DC converter block for mobile phone's sub OLED(Organic Light Emitting Display). Package IC contains a load switch, a control IC, a diode, a switch for on/off operation, and a switch for changing output voltage. It operates with switching frequency of 100kHz, within the range of input voltage, $3.2V\~5.5V$. Duty ratio can be changed up to $93\%$, and maximum power efficiency is $85\%$. This package IC is loaded onto three model of 1.2W mobile phone's sub-OLED.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.997-998
• /
• 2006

This paper proposes an design of the OLED(Organic Light Emitting Diodes) driver IC using novel verification method. This method using the HDL(hardware description language) simulator, PLI(Programing Language Interface) and image viewer. The proposed method can be used efficiently to function verification in display driver IC.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.61-65
• /
• 2013

In this work, the anodic oxidation of carbon fibers was carried out to enhance the mechanical interfacial properties of carbon fibers-reinforced epoxy matrix composites. The surface characteristics of the carbon fibers were studied by FTIR, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Also, the mechanical interfacial properties of the composites were studied with interlaminar shear strength (ILSS), critical stress intensity factor ($K_{IC}$), and critical strain energy release rate ($G_{IC}$). The anodic oxidation led to a significant change in the surface characteristics of the carbon fibers. The anodic oxidation of carbon fiber improved the mechanical interfacial properties, such as ILSS, $K_{IC}$, and $G_{IC}$ of the composites. The mechanical interfacial properties of the composites anodized at 20% sulfuric/nitric (3/1) were the highest values among the anodized carbon fibers. These results were attributed to the increase of the degree of adhesion at interfaces between the carbon fibers and the matrix resins in the composite systems.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.49.2-49.2
• /
• 2011

$PbMoO_4$ nanoparticles were successfully obtained in the presence of ethylene glycol (EG) with the assistance of a prolonged sonication process. The nanoparticles were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS) and adsorption-desorption $N_2$ isotherms (BET). The catalyst prepared sonochemically showed higher photocatalytic activity than $PbMoO_4$ prepared by solid-state reaction in the degradation reactions of rhodamine B (rhB), indigo carmine (IC), orange G (OG), and methyl orange (MO) under UV-Vis light radiation. In order to elucidate aspects of the degradation mechanism of the organic dyes, some experimental variables were modified such as pH, $O_2$ level in solution, and radiation source. In general, the photocatalytic activity for the degradation of organic dyes followed the sequence IC>OG>rhB>MO.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.11.2-11.2
• /
• 2009

본 발표에서는 flexible display의 back plane 구동 소자, organic sensor, 그리고 organic radio frequency identification (RFID) Tag 등으로의 응용을 목표로 최근 활발히 연구 중인 유기 반도체 박막 트랜지스터에 대한 소개를 바탕으로 유기 반도체를 전자회로 분야에서 사용하기 위해 해결해야 할 문제점과 연구 개발이 절실히 필요한 부분에 대해 소개하고 자 함. organic RFID 응용 기술에 초점을 두고 RFID 기술의 개요, 종류, 주파수 대역 등에 대한 기초적인 지식을 바탕으로 organic RFID의 향후 시장 전망에 대해 토론한 후 현재 PolyIC, Organic ID, IMEC 등의 선진사에서 상용화를 목표로 활발히 연구 중인 organic RFID의 세계적 기술 수준과 최근 연구 결과들을 공유하고자함. 최근 ETRI에서 향 후 바코드 대체용으로 활발히 연구 중인 item level tagging용 13.56 MHz프린팅 RFID 기술을 소개하고 이를 구현하기 위한 유기반도체 트랜지스터, 정류기 등 다양한 종류의 회로들을 프린팅 소재와 공정으로 제작할 때의 문제점을 공유하고, 더 나아가 프린팅 전자 소자의 상용화를 위한 향 후 연구 개발 주제 및 방향 등에 대해 토론하고자함.

• Natural Product Sciences
• /
• v.24 no.4
• /
• pp.284-287
• /
• 2018

A new isoprenylated acetophenone, acronyculatin P (1) as well as two known compounds, 3',5'-diisoprenyl-2',4'-dihydroxy-6'-methoxyphenylethanone (2) and 3'-isoprenyl-2',4',6'-trihydroxyphenylethanone (3) were isolated from the stem bark of Acronychia pedunculata (L.) Miq. The structures were determined by HRESIMS, 1D and 2D NMR. The inhibitory activity of the isoprenylated acetophenone derivatives against murine leukemia P-388 cells showed compound 1 moderate activity with $IC_{50}$ $15.42{\mu}M$.

• Natural Product Sciences
• /
• v.28 no.2
• /
• pp.58-61
• /
• 2022

Three isoprenylated flavanones were isolated from the leaves of Flemingia lineata (L.) Aiton. Among them are two new flavanones, flemilineatins A and B (1-2), along with 6-isoprenyl eridioctyol (3). Their structures were determined using HRESIMS data and NMR spectra. Flavanones 1 - 3 were assayed in the HeLa cancer cells. Compound 1 showed moderate activity with an IC₅₀ value of 11.2 μM.

• Natural Product Sciences
• /
• v.28 no.1
• /
• pp.40-43
• /
• 2022

Three isoprenylated flavanones were isolated from the leaves of Flemingia lineata (L.) Aiton. Among them are two new flavanones, flemilineatins A and B (1-2), along with 6-isoprenyl eridioctyol (3). Their structures were determined using HRESIMS data and NMR spectra. Flavanones 1-3 were assayed in the HeLa cancer cells. Compound 1 showed moderate activity with an IC₅₀ value of 11.2 μM.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.15-22
• /
• 1997

A 10Gbit/s limiting amplifier IC for optical transmission system was implemented with AlGaAs HBT (heterojunction bipolar transistor) technology. HBTs with 2x10.mu. $m^{2}$ and 6x20.mu. $m^{2}$ emitter size were used. The HBT structures are based on metal-organic chemical vapor deposition (MOCVD) epitxy and employ a mesa structure with self-aligned emitter/base and sidewall dielectric passivation. IC was designed to support differnetial input and output. Small signal performance of the packaged IC showed 26dB gain and $f_{3dB}$ of 8GHz. A single ouput has 800m $V_{p-p}$ swing with more than 26dB dynamic range. The performance of the limiting amplifier was verified through single mode fiber320km transmission link test.est.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.995-996
• /
• 2006

This paper presents a design of the PMOLED(Passive Matrix Organic light emitting diodes) driver IC improving the terminal current offset. The proposed methods are improving the design of the usual data output circuit. This methods can be avoidance brightness non-uniformity problem.