• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.41-46
• /
• 2008

Recently, computational calculation of molecular energy potentials and electrochemical reduction/oxidation behaviors are of very importance in view point of prediction of dye's properties such as energy levels and bandgaps of absorption. This can be influenced by their different constituents or substituents in chromogen molecules. Structural conformations and properties with computational modeling calculation are numerically simulated, which are fully or partly based on fundamental laws of physics. In addition, cyclic voltammetric measurement was used to obtain the experimental redox potential values, which were compared to the computed simulation values.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1407-1410
• /
• 2007

This work reports on three primary color fluorescent white organic light emitting diode (WOLED) with simple device structure where only a part of the hole transporting layer was doped with dye. The maximum luminance of the device reaches $35000\;cd/m^2$ at a drive voltage below 11V and external quantum efficiency of the device is above 1% in the wide range of luminance from 10 to $35000\;cd/m^2$ and reaches its highest 1.6% at $500\;cd/m^2$. The chromaticity coordinate shift of the device is negligible in this wide range of luminance. The blue shift of emission color with an increase of current density was attributed to the narrowing of recombination zone width with raise of current density.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.1
• /
• pp.44-49
• /
• 2012

Electrochemical and photochemical techniques have been proved to be effective for the removal of organic pollutants in textile wastewater. The present study deals with degradation of synthetic textile effluents containing reactive dyes and assisting chemicals, using electro oxidation and photo catalytic treatment. The influence of various operating parameters such as dye concentration, current density, supporting electrolyte concentration and lamp intensity on TOC removal has been determined. From the present investigation it has been observed that nearly 70% of TOC removal has been recorded for electrooxidation treatment with current density 5 mA/$dm^2$, supporting electrolyte concentration of 3 g/L and in photocatalytic treatment with 250 V as optimum lamp intensity nearly 67% of TOC removal was observed. The result indicates that electro oxidation treatment is more efficient than photocatalytic treatment for dye degradation.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.143-149
• /
• 2014

The designed dye material, namely 2-(4-(9H-carbazol-9-yl)benzylidene) compound, was synthesized. After the reaction, the solid was filtered and purified by recrystalization with acetone/water. To confirm and analyze its synthesis and structural formation, the single crystal was prepared and its measurement was carried out. A yellow needle crystal of $C_{22}H_{13}N_3$ were made on a Rigaku R-AXIS RAPID diffractometer using graphite monochromated CuK${\alpha}$ radiation. All details were suggested and introduced to support and communicate this study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.376-382
• /
• 2000

We successfully fabricated OLED(Organic Light Emitting Diodes) with Al cathodes electrode deposited by the DC magnetron sputtering. The effects of a controlled Al cathode layer of an Indium Tin Oxide (ITO)/blended single polymer layer (PVK Bu:PBD:dye)/Al light emitting diodes are described. The PVK (Poly(N-vinylcarbazole)) and Bu-PBD (2-(4-biphenyl-phenyl)-1,3,4-oxadiazole) are used hole transport polymer and electron transport molecule respectively. We found that both current injection and electroluminescence output are significantly different with a variable DC sputtering power. The difference is believed to be due to the influence near the blended polymer layer/cathode interface that results from the DC power and H$\sub$2//O in a chamber. And DC sputtering deposition is an effective way to fabricate Al electrodes with pronounced orientational characteristics without damage occurring to metal-organic interface during the sputtering deposition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.316-316
• /
• 2010

Six metal-free organic dyes having thiophene (1), benzene-thiophene (2), thiophene-benzene (3), thiophene-pyridine(4), thiophene-thiophene (5), and pyridine (6) linkers between 9,9-dimethylfluorenyl terminal group and $\alpha$-cyanoacrylic acid anchor were synthesized. Among them, organic dye 5 showed the longest ${\lambda}}max$ value (424 nm) in UV-Vis absorption spectrum, better incident monochromatic photon-to-current conversion efficiency (IPCE), highest short circuit photocurrent density (JSC, 9.33 mA2/cm2), and highest overall conversion efficiency ($\eta$, 3.91%).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.314-319
• /
• 2015

In this research, we focused on the development of cy3 dye with high thermal stability and good solubility for LCD color filter. Cy3 dyes were prepared through the synthetic procedure of two steps. The synthesized cy3 dyes were characterized by using NMR, FT-IR, UV/Vis spectroscopy, and TGA. These cy3 dyes showed maximum absorption wave length (${\lambda}_{max}$) in the range of 549~555 nm in UV/Vis spectrum. And we confirmed that solubility characteristics and thermal stability of cy3 dyes were dependent on the structure of counter cation. Cy3 dyes with methyl counter cation and ethyl counter cation have good solubility in organic solvents such as chloroform, ethanol, and PGME. Moreover, Cy3 dye with ethyl counter cation gave excellent thermal stability in TGA thermograms. And Cy3 dye with ethyl counter cation showed good result in photoresist film test.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.17-23
• /
• 1994

Through sol-gel process, inorganic/organic composite as a dye host was made. It was observed that this composite has about 90% of trnasmittance by UV/VIS spectrophotometer. The transmittance is the most important requirement to decide whether the composite could apply or not as the dye host. The transmittance was increased with decreasing HCl as a catalyst, aging time, and amount of PDMS. Also, fluorescent and transmittant charateristics of Rhodamine 6G Perchlorate that was doped into ORMOSIL were measured. The fluorescent intensity was increased and the trnasmittance was decreased with rising gelling temperature.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3272-3278
• /
• 2010

Synthesis and structural characterization of peripherally ferrocene-substituted zinc phthalocyanine (ZnPc-Fc) were carried out for efficient far-red/near-IR performance in dye-sensitized nanostructured $TiO_2$ solar cells. Incorporating ferrocene into phthalocyanine strongly improved the dye solubility in polar organic solvents, and reduced surface aggregation due to the steric effect of bulky ferrocene substituents. The involvement of electron transfer reaction pathways between ferrocene and phthalocyanine in ZnPc-Fc was evidenced by completely quenched fluorescence from S1 state (< 0.08% vs ZnPc). Strong absorption bands at 542 and 682 nm were observed in the transient absorption spectroscopy of ZnPc-Fc in DMSO, which was excited at a 670 nm laser pulse with a 15 ps full width at half maximum. Also, the excited state absorption signals at 450 - 600 and 750 - 850 nm appeared from the formation of charge separated state of phthalocyanine's anion. The lifetime of the charge separate state in ZnPc-Fc was determined to be $170{\pm}8$ ps, which was almost 17 times shorter than that of the ZnPc.

• Clean Technology
• /
• v.9 no.3
• /
• pp.145-151
• /
• 2003

This study shows the evaluation and consulting for pollution prevention of dye production by cleaner production methodology. Especially, this study intended to investigate the methods for reduction of process water and recovery of organic solvent (DMF), and to modify the process for higher qualified products in the acid dye production by cleaner production methodology. This methodology, consisting of 7 sequential phases (business leadership decision to start, problem definition, evaluation of the screened options, option selection for implementation, implementation, monitoring and sustainable implementation), is based on initial developments in the USA and Western Europe. Reduction of process water over 25%, recovery of DMF and solubility enhancement of acid dye over 2 times were achieved.