• 제목/요약/키워드: Oregon

검색결과 369건 처리시간 0.034초

Investigation of thermal hydraulic behavior of the High Temperature Test Facility's lower plenum via large eddy simulation

  • Hyeongi Moon ;Sujong Yoon;Mauricio Tano-Retamale ;Aaron Epiney ;Minseop Song;Jae-Ho Jeong
    • Nuclear Engineering and Technology
    • /
    • 제55권10호
    • /
    • pp.3874-3897
    • /
    • 2023
  • A high-fidelity computational fluid dynamics (CFD) analysis was performed using the Large Eddy Simulation (LES) model for the lower plenum of the High-Temperature Test Facility (HTTF), a ¼ scale test facility of the modular high temperature gas-cooled reactor (MHTGR) managed by Oregon State University. In most next-generation nuclear reactors, thermal stress due to thermal striping is one of the risks to be curiously considered. This is also true for HTGRs, especially since the exhaust helium gas temperature is high. In order to evaluate these risks and performance, organizations in the United States led by the OECD NEA are conducting a thermal hydraulic code benchmark for HTGR, and the test facility used for this benchmark is HTTF. HTTF can perform experiments in both normal and accident situations and provide high-quality experimental data. However, it is difficult to provide sufficient data for benchmarking through experiments, and there is a problem with the reliability of CFD analysis results based on Reynolds-averaged Navier-Stokes to analyze thermal hydraulic behavior without verification. To solve this problem, high-fidelity 3-D CFD analysis was performed using the LES model for HTTF. It was also verified that the LES model can properly simulate this jet mixing phenomenon via a unit cell test that provides experimental information. As a result of CFD analysis, the lower the dependency of the sub-grid scale model, the closer to the actual analysis result. In the case of unit cell test CFD analysis and HTTF CFD analysis, the volume-averaged sub-grid scale model dependency was calculated to be 13.0% and 9.16%, respectively. As a result of HTTF analysis, quantitative data of the fluid inside the HTTF lower plenum was provided in this paper. As a result of qualitative analysis, the temperature was highest at the center of the lower plenum, while the temperature fluctuation was highest near the edge of the lower plenum wall. The power spectral density of temperature was analyzed via fast Fourier transform (FFT) for specific points on the center and side of the lower plenum. FFT results did not reveal specific frequency-dominant temperature fluctuations in the center part. It was confirmed that the temperature power spectral density (PSD) at the top increased from the center to the wake. The vortex was visualized using the well-known scalar Q-criterion, and as a result, the closer to the outlet duct, the greater the influence of the mainstream, so that the inflow jet vortex was dissipated and mixed at the top of the lower plenum. Additionally, FFT analysis was performed on the support structure near the corner of the lower plenum with large temperature fluctuations, and as a result, it was confirmed that the temperature fluctuation of the flow did not have a significant effect near the corner wall. In addition, the vortices generated from the lower plenum to the outlet duct were identified in this paper. It is considered that the quantitative and qualitative results presented in this paper will serve as reference data for the benchmark.

오존 처리한 폐식용유의 화학구조와 pMDI로 제조한 접착제의 목재 접착강도 (Chemical Structure of Ozonized Waste Cooking Oil and Wood Bonding Strengths of Reaction Products with pMD)

  • 강찬영;이응수;류재윤;이현종;서준원;박헌
    • Journal of the Korean Wood Science and Technology
    • /
    • 제38권4호
    • /
    • pp.316-322
    • /
    • 2010
  • 본 연구의 목적은 폐식용유를 오존산화 처리에 의한 구조적 변성을 시도하고 이를 pMDI와 반응시켜 목재접착제로 개발하고자 하는 것이다. 폐식용유를 사용하여 1, 2, 3시간 오존산화 처리 한 후 화학적 변화를 알아보기 위하여 FT-IR을 측정하였다. 또한 접착강도를 조사하기 위하여 상태, 내수, 내온수, 반복끓임 실험을 하였다. FT-IR 측정 결과, 폐식용유의 오존산화가 진행될수록 불포화 이중결합에 기인한 3,010 $cm^{-1}$ 부근의 흡수가 사라지고 1,700 $cm^{-1}$ 부근의 카르복실기의 흡수가 크게 나타났다. 특히 3시간대에 3,010 $cm^{-1}$ 부근에 이중결합이 거의 사라짐을 알 수 있었다. 3시간 처리한 폐식용유의 상태 접착력 시험 결과, 폐식용유: pMDI 비율이 1 : 0.5일 때 8.08 kgf/$cm^2$, 1 : 0.75일 때 9.53 kgf/$cm^2$, 1 : 1일 때 44.16 kgf/$cm^2$ 1 : 2일 때 58.08 kgf/$cm^2$, 1 : 3일 때 61.41 kgf/$cm^2$, 1 : 4일 때는 46.95 kgf/$cm^2$를 나타내어 MDI와의 적정당량이 1 : 2, 1 : 3 부근에서 결정됨을 알 수 있었다. 중량비 1 : 2, 1 : 3만을 선택하여 각각 내수, 내온수, 반복끓임 상태로 접착강도 시험을 실시하였다. 내수 접착강도에서는 1 : 3의 경우가 더 높은 값을 보였으나 실험조건이 강화된 내온수, 반복 끓임에서는 혼합비율 1 : 2와 1 : 3이 비슷한 값을 나타내었다.

우리나라 산지계류에 있어서 유목 동태의 시.공간적 다양성과 그에 따른 유출 특성 (Spatio-temporal Variations in the Dynamics and Export of Large Wood in Korean Mountain Streams)

  • 서정일;전근우;김석우;임상준
    • 한국산림과학회지
    • /
    • 제101권3호
    • /
    • pp.333-343
    • /
    • 2012
  • 유목은 산림유역의 생태적 환경과 인간 생활권에 막대한 영향을 미칠 수 있는 요인임에도 불구하고 우리나라에서는 유역단위 관점에서의 유목 동태와 유출 특성에 대한 연구가 부족한 실정이다. 따라서 이 논문에서는 우리나라 산림유역에서 산지계류의 규모에 따른 유목 동태의 시 공간적 다양성과 유출 특성을 고찰하였다. 소규모의 상류 산지계류에서는 강풍, 산불, 병충해와 피압에 의한 고사 등의 산림동태와 산사태 등의 사면활동에 의해 유목이 생산된다. 생산된 유목은 좁은 계폭과 적은 유량에 의해 계류 내에 장기간 체류하게 된다. 그러나 산사태에 의한 토석류와 홍수시에 증가된 유량으로 인해 많은 양의 유목이 일시적으로 하류로 유출되며, 이 과정에서 유목은 토석이나 계상 및 계안과의 마찰로 인해 파쇄 된다. 이러한 현상은 대규모의 집중호우 시 이외에는 거의 발생하지 않지만, 상류 산지계류에 분포하고 있는 유목을 유출시키는 주요 원인이다. 한편, 하류 산지계류의 경우 유목은 성숙한 임분의 수변림이 형성되어 있는 범람원과 접하고 있는 계류구간에서 산림동태와 계안붕괴로 인해 주로 생산된다. 이렇게 생산된 유목은 상류 산지계류에서 유입된 유목과 함께 강우발생 시 형성되는 넓은 계폭과 깊은 수심에 의해 하류로 이동하게 되며, 이 과정에서 계안과의 마찰에 의한 파쇄작용으로 유목의 크기가 더욱 작아져 이동능력이 극대화된다. 그러나 계상경사가 완만해 지는 구간에 이르러서는 계류형상과 범람원과의 상호작용에 의해 사행 유로나 2차 유로 등의 퇴적공간이 발달하기 시작한다. 특히 계류의 규모가 크고 장기간 홍수이력이 없는 산지계류의 경우 이러한 퇴적공간이 더욱 두드러지게 발달하여 유목이 군적으로 체류하게 되며, 이는 결국 산림유역 내에 유목을 장기간 체류시켜 유목 유출량을 저감시킨다. 그러나 우리나라의 산지계류는 대부분 유로연장이 짧고 홍수발생이 잦은 편이므로 유목을 장기간 체류시킬 수 있는 체류공간이 적으며, 결국 많은 양의 유목이 하류로 유출된다. 이 연구의 결과는 산지계류의 수리학 지형학적 환경에 따른 생태학적 안정과 잠재적인 재해가능성의 저감을 위한 유역관리에 유용하게 활용될 것이다.

논에서 이탈리안 라이그라스와 두과 사료작물 혼파에 따른 생산성 및 사료가치 비교 (Dry Matter Yield and Forage Quality at Mixture of Annual Legumes and Italian ryegrass on Paddy Field)

  • 김원호;김기용;정민웅;지희정;임영철;서성;김종덕;윤봉기;이효원
    • 한국초지조사료학회지
    • /
    • 제31권1호
    • /
    • pp.33-38
    • /
    • 2011
  • 본 연구는 논에서 이탈리안 라이그라스와 두과 사료작물 혼파에 의한 생산성을 구명코자 전라남도농업기술원에서 2004년부터 2008년까지 수행하였다. 처리내용은 이탈리안 라이그라스(코윈어리 품종) 단파에 자운영, forage pea, crimson clover 그리고 hairy vetch을 혼파하는 5처리 3반복으로 실시하였다. 그리고 이탈리안 라이그라스와 두과 사료작물 혼파비율은 단파 기준으로 70:30 비율로 혼파하였다. 논에서 이탈리안 라이그라스 단파와 두과 사료작물 혼파에 의한 건물률은 23.6~26.8%였고 혼파에 따른 건물률은 비슷하였다. 그리고 이탈리안 라이그라스와 forage pea와 혼파에 의한 생초 및 조단백질 수량은 각각 ha당 40,100 kg, 그리고 625 kg/ha으로 유의적으로 많았다(p<0.05). 또한 건물수량은 이탈리안 라이그라스와 forage pea 그리고 hairy vetch 혼파시 ha당 각각 9,470 kg 그리고 9,500 kg 유의적으로 많았다(p<0.05). 이탈리안 라이그라스와 forage pea 혼파 토양의 유효인산 함량이 78 mg /kg으로 많았으며, 이탈리안 라이그라스 단파 K 함량보다 혼파시 0.52~0.88$cmol^+$/kg으로 훨씬 높았다. 따라서 논에서 이탈리안 라이그라스와 forage pea을 혼파하여 건물수량, 조단백질 수량의 증가 및 재배의 안정성 제고에 효과적이었으며, 이탈리안 라이그라스 단파보다는 혼파재배가 바람직한 것으로 평가되었다.

Methyl Bromide를 대체하는 훈증 가스의 문화재 재질 안정성 평가 (The Stability Appraisement on Cultural Property Material with the Replacing Fumigation Gas of Methyl Bromide)

  • 강대일
    • 보존과학회지
    • /
    • 제25권3호
    • /
    • pp.283-291
    • /
    • 2009
  • 현재까지 문화재 훈증제로서 사용되어왔던 브롬화메틸(Methyl Bromide, 이하 M.B)은 온실 가스로 지구 오존층 파괴의 원인물질로 판명되어, 1987년 몬트리올 의정서에 의해 선진국에서는 2005년부터 사용이 금지되었다. 또한, 2007년 발리 협약에 의해 우리나라도 점진적으로 사용 규제가 예상되므로, 본 실험에서는 Methyl Bromide를 대체할 Ethylene Oxide + HFC 134a, Methyl Iodide, Cyanogen, Argon 훈증법이 금속(은, 구리, 철), 목재(미송), 안료(황, 장단, 양청, 백분, 먹), 섬유(삼베, 모시, 황마, 도침 비단, 비도침 비단 / 쪽, 황벽, 홍화 염색), 지류(닥지 4종, 중성지 1종) 시편 재질에 미치는 안정성 평가를 실시하였다. 훈증 실험 결과, Ethylene Oxide + HFC 134a가 훈증 전, 후 실험 시편의 중량, 색도 변화 등에 가장 영향이 없었다. 표면변화는 지류와 금속시편에서 부분적으로 변색이 발생하였다. 색도변화는 대부분의 시편에서 0.5에서 1.5내외의 근소한 색차를 나타내었다. Methyl Iodide는 훈증 전, 후 중량변화가 거의 없는 것으로 나타났다. 색도변화는 대부분의 실험시편에서 1.0 이상의 색차를 나타내었다. 특히, 염색된 대부분의 섬유시편에서 비교적 큰 색도변화가 나타났다. 표면변화는 양청안료시편에서 육안으로 관찰 가능한 변색이 관찰되었다. Cyanogen은 훈증 전, 후 실험 시편의 중량변화에 큰 영향이 없는 것으로 나타났다. 색도변화는 전반적으로 실험시편에서 1.5이상 정도의 색차를 보였다. 특히, 섬유시편의 변색에 큰 영향을 주는 것으로 나타났다. Argon으로 훈증한 실험시편은 중량변화가 3~6% 내외로 감소한 것으로 나타났다. 표면변화는 지류시편에서 부분적으로 변색이 발생한 것을 관찰할 수 있었다. 색도변화는 2주 훈증 조건에서 홍화와 황벽으로 염색한 황마시편이 6.3, 6.0의 현저한 색차를 나타냈다.

  • PDF

한국의 4개 주요항만(부산, 울산, 광양, 인천)에 분포하는 섬모충 플랑크톤의 계절동태 특성 (Characteristic of Seasonal Dynamics of Planktonic Ciliates at Four Major Ports (Busan, Ulsan, Gwangyang and Incheon), Korea)

  • 양승우;이준백;김영옥
    • 환경생물
    • /
    • 제36권2호
    • /
    • pp.217-231
    • /
    • 2018
  • 2007년 2월부터 2008년 11월까지 국내의 4개 주요 항만(부산항, 울산항, 인천항, 광양항)에 분포하는 유종섬모충류의 계절적 출현양상과 선박평형수 벡터종(Coos Bay 벡터종 기준)의 계절적 출현양상을 조사하였다. 조사 기간 중 부산항과 울산항에서 유종섬모충류 난류종인 Ascampbeliella urceolata, Codonellopsis morchella, C. ostenfeldi, Dadayiella ganymedes, Eutintinnus stramentus, Protorhabdonella curta가 8월과 11월에 출현하였다. 인천항과 광양항에서는 전 계절을 통해 연안종이 출현하였고 특히 저수온기와 고수온기에 연안종의 출현이 뚜렷하였다. 광양항에서는 2007년 5월에 난류종 Tintinnopsis ampla의 출현과 2008년 11월에 C. ostenfeldi가 출현을 보였지만 인천항에서는 난류종의 출현이 관찰되지 않았다. 유종섬모충 출현분포의 특성은 연안종이 주로 출현하였으며, 부산항과 울산항에서 8월과 11월에 난류종이 중점적으로 출현하고 있는 것은 쿠로시오 해류(Kuroshio current)의 지류인 대마난류(Tsushima Warm Current)의 영향에 의한 유입되는 것으로 판단된다. 또한 조사 기간 중 주요 항만에서 출현한 유종섬모충류의 벡터종은 총 13종이었다. 광양항에서 13종으로 가장 많은 종이 출현하였고 인천항에서 6종으로 가장 적은 종수가 관찰되었으며 부산항과 울산항에서 각각 10종과 11종이 관찰되었다. 이들 벡터종은 부산항, 울산항, 광양항의 고수온기에 가장 많은 출현종수를 보인 반면, 인천항에서는 저수온기 2월에 가장 많은 출현종수를 보여 항만에 따른 차이를 보였다. 그러나 우리나라에 해역에 영향을 주는 서로 다른 해류에 의한 유입종 연구와 선박 평형수에 의해 유입된 벡터종의 연구가 매우 부족하기 때문에 주요 항만의 유종섬모충류의 종조성 차이에 대한 정확한 결론을 내리기에는 어려움이 있어 앞으로 이에 대한 체계적인 연구가 필요하다고 판단된다.

산지계류에 있어서 유목의 종단적 분포특성 (Longitudinal Pattern of Large Wood Distribution in Mountain Streams)

  • 서정일;전근우;김민식;염규진;이진호;木村正信
    • 한국산림과학회지
    • /
    • 제100권1호
    • /
    • pp.52-61
    • /
    • 2011
  • 수변역을 구성하는 중요한 요소인 유목은 유역의 생태적 환경에 영향을 미치는 동시에 재해의 요인으로서 인간생활권에 악영향을 미치기도 한다. 그럼에도 불구하고 우리나라에서는 유목의 발생, 이동 및 체류특성에 대한 구체적인 연구가 진행되고 있지 않다. 따라서 이 연구에서는 산지계류에 있어서 유목체류의 종단적 분포의 이질성에 영향을 미치는 인자를 규명하고, 그에 따른 유목체류량의 변화를 해석하기 위해 강원도 인제군에 위치한 기룡산 유역을 대상으로 유목의 종단적 분포특성을 파악하였다. 조사 결과, 조사구간의 평균계폭, 직경 1 m 이상의 거력의 개수 및 이들 간의 상호관계가 유목체류량을 설명하는 최적의 예측자로서 나타났다. 일반적으로 산지계류에 분포하고 있는 거력은 유목의 이동을 방해하는 장해물로서 유목체류에 적절한 물리적 환경을 조성한다. 그러나 이 연구에서는 이러한 거력의 영향이 산지계류의 규모에 따라 다르게 나타나는 것으로 나타났다. 즉 계폭이 좁은 구간의 경우 산지계류 내에 분포하는 거력의 개수가 증가함에 따라 유목체류량 역시 지속적으로 증가한 반면, 계폭이 큰 구간의 경우 유목체류량에 미치는 거력의 개수의 영향이 작은 것으로 나타났다. 이는 계폭이 다른 두 지역에 있어서 동일한 양의 거력들이 존재할 경우 이들에 의한 계폭의 감소비율이 다르기 때문인 것으로 사료된다. 따라서 이러한 유목의 종단적 분포특성 및 이에 영향을 미치는 생태적 물리적 환경을 고려한 계통적이고 체계적인 사방사업이 실시되어야 할 것이다.

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF

소비자대함유한국전통시상설계원소적편복적소비행위지우생활방식적조절작용(消费者对含有韩国传统时尚设计元素的便服的消费行为之于生活方式的调节作用) (Moderating Effect of Lifestyle on Consumer Behavior of Loungewear with Korean Traditional Fashion Design Elements)

  • Ko, Eun-Ju;Lee, Jee-Hyun;Kim, Angella Ji-Young;Burns, Leslie Davis
    • 마케팅과학연구
    • /
    • 제20권1호
    • /
    • pp.15-26
    • /
    • 2010
  • 由于生产的全球化以及国家之间的文化交流, 东方元素越来越吸引世界的眼球. 在时装界, 一个时装设计师的文化背景往往可以催生新颖的设计理念, 使他卓尔不群. 人们对于东方元素的喜爱, 给传统时装市场带来了巨大的商机, 并且把基于文化的业务拓展到全球时装市场. 然而, 包含韩国传统文化的国际品牌还有待开发. 为了发展有韩国特色的国际品牌, 韩国人首先要在国内服装市场上认同本国文化, 然后才能进军国外市场. 便服非常适合采纳韩国元素, 因为这种衣服有很多用途, 很容易被广泛接受和使用. 而且, 多用途便服和时尚内衣的市场需求越来越大. 尽管便服市场在快速发展, 但是对便服的专门研究尚不多见, 目前在对发展中的现代化传统服装、时尚产品和品牌的研究中, 并不包括对便服的研究. 因此, 本论文调查了韩国的便服市场, 研究了消费者对含有韩国传统时装设计特色的便服的评价. 分析了对于韩国传统时装设计元素有购买意向的先例之间的关系, 并且比较了不同生活群体的消费目标. 产品质量, 零售服务质量, 感受价值以及对拥有韩国传统设计元素的便服的喜好被作为购买意向的先决条件. 同时, 本文设计了一个结构方程模型, 用于探讨它们之间的关系以及它们对购买意图的影响. 产品质量和市场营销中的零售服务质量结合在一起, 成为影响人们对韩国特色便服的偏好和价值感知的因素. 而且, 偏好和价值感知对购买意向的影响可以用同一模型来检验. 通过网上调查系统由女性消费者完成了一共357份的自填式问卷, 并制定了一份调查样本人群的生活方式、对于产品和销售服务的标准、对于韩国特色便服的价值感知、偏好以及购买意向的调查问卷. 此外, 问卷还将调查便服的采购和使用行为, 以便检验韩国便服的市场地位. 并且使用描述性分析, 因素分析, 聚类分析来分析数据, 以及使用AMOS 7.0.来进行方差分析和建立结构方程模型. 对于韩国便服市场地位的调查结果显示, 在我们的样本人群中大多数消费者都购买了便服. 便服在目前被认为是在家里穿的衣服, 是消费者比较而言投入较低的衣服. 在调查中显示, 大多数消费者每年仅仅购买2到3次便服, 花费在10美元以下. 购买便服的消费者们的生活方式共有四类: 传统价值导向的生活方式, 品牌影响的生活方式, 追求休闲的生活方式以及健康导向的生活方式, 这四类共计有12个项目. 基于这些生活方式要素, 便服消费者们又可以分为两类: 安乐派和保守派. 文章估量了对含有韩国传统时尚设计元素的便服的购买行为各组成部分之间的关系, 产品质量和零售服务质量都会影响到购买便服的偏好和价值感知. 这个研究结论证明, 高质量的产品和零售服务会对便服形成积极的优先效应. 价值感知和对便服的偏好会对购买意图产生积极的影响. 这个结果表明, 对便服所含有的韩国传统时尚设计因素的强烈偏好和价值感知能增强购买意图. 在两种不同生活方式的群体(即安乐派和保守派)的模型比较中, 结果显示产品质量和零售服务质量对安乐派群体的偏好和感知价值都有积极影响. 然而, 对保守派来说, 只有零售服务质量对偏好和购买意图有积极的影响. 由于安乐派对购买意图显示出更重大的影响, 包含韩国传统时尚设计因素的便服品牌应该关注安乐派的这些特征. 然而, 保守派对包含韩国传统时尚设计因素的便服在偏好和购买意图的关系中显得更强. 因此对包含韩国传统时尚设计因素的便服品牌来说, 它应该把重点放在如何激发保守群体消费者对便服的积极偏爱上. 这些结果提供了关于韩国便服消费者生活方式的信息, 也对那些计划进入韩国便服市场的时尚品牌, 尤其是那些与现行研究样本相似的, 目标为女性消费者的时尚品牌提供了有用的信息. 这一研究也为便服品牌和那些打算创造含有韩国传统时尚因素的高价值品牌提供了策略和市场洞察力. 考虑到不同生活方式群体的类型和便服或传统时尚商品之间的关系, 品牌设计者和市场策划人员可以运用这一研究成果作为市场定位, 目标设定, 以及市场销售策略的一个参考.