• Journal of Nutrition and Health
• /
• v.25 no.6
• /
• pp.476-484
• /
• 1992

The influence of selenuium deficiency and fish oil on lipid peoxidation status and fatty acid composition of tissues(plasma aorta and liver) was studied. Male Sprague Dawley rats were fed for eight weeks semipurified diets containing 7% corn oil(by weight) or 5, 5% fish oil(MaxEPA) plus 1.5% corn oil with oil with or without selenium status (glutathione peroxidase activity and selenium levels) were significantly lower in the rats given inadequate selenium in plasma aorta (p<0.02 and p<0.001 respectively) gut not that in plasma Selenium supplementation decreased hepatic MDA levels(p<0.02) Increases in the levels of 20:5(n-3) 22:5(n-3), 22:6(n-3) 20:3(n-6) and a decrease in the level of 20:4(n-6) were observed in plasma total lipids and aortic and hepatic phospholipids when fish oil was fed. Though selenium supplementation increased the level of n-3 fatty acids(such as 22:6(n-3)) in plsama and the aorta is overall effect was smaller than the effect of fish oil feeding. These data suggest that selenium may play a significant but minor role in protecting against lipid peroxide-tion even when vitamin E intakes are in excess of current recommendations in both corn oil and fish oil diets.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.97-104
• /
• 2013

Methyl alcohol is one of the basic intermediates in the chemical industry and is also being used as a fuel additive and as a clean burning fuel. In this study, conversion of carbon dioxide to methyl alcohol was investigated using catalytic chemical methods. Ceramic monoliths (M) with $400cell/in^2$ were used as catalyst supports. Monolith-supported CuO-ZnO catalysts were prepared by wash-coat method. The prepared catalysts were characterized by using ICP analysis, TEM images and XRD patterns. The catalytic activity for carbon dioxide hydrogenation to methyl alcohol was investigated using a flow-type reactor under various reaction temperature, pressure and contact time. In the preparation of monolith-supported CuO-ZnO catalysts by wash-coat method, proper concentration of precursors solution was 25.7% (w/v). The mixed crystal of CuO and ZnO was well supported on monolith. And it was known that more CuO component may be supported than ZnO component. Conversion of carbon dioxide was increased with increasing reaction temperature, but methyl alcohol selectivity was decreased. Optimum reaction temperature was about $250^{\circ}C$ under 20 atm because of the reverse water gas shift reaction. Maximum yield of methyl alcohol over CuO-ZnO/M catalyst was 5.1 mol% at $250^{\circ}C$ and 20 atm.

• Journal of the Korean Geographical Society
• /
• v.45 no.1
• /
• pp.49-74
• /
• 2010

Cities are major sources of greenhouse gas emissions but also suitable places for implementing proactive climate mitigation and adaptation strategies. Based on the interdisciplinary review of literature, we categorize the current discussion about urban climate mitigation and adaptation planning, policy and practices into four perspectives - sustainability science, global change science, multilevel governance, and structural engineering. While these four schools of thought have distinct perspectives rooted in different disciplinary lenses, our synthesis of the literature identifies several universal themes that are common to all of the perspectives in the context of combating threats posed by climate change. The Portland case study illustrates that a city can make changes to reduce greenhouse gas emissions and increase adaptive capacity to climate change impacts by implementing smart growth, devising local climate action plans that target emission reductions in various sectors, recognizing the interactions and influences of multiple scales of governance, and supporting the installation of various green infrastructures that contribute to green economy. Furthermore, a university can serve as a hub in this climate mitigation and adaptation arena by connecting various levels of community organizations in both public and private sectors, creating innovative research centers and spatially explicit green infrastructure, designing impact assessments and campus carbon inventories, and engaging students and the larger community through service learning.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.5-13
• /
• 2015

Wave overflow can cause a failure of sea dike structure. Based on the results of the field surveys on mound-type sea dike, the failure of vicinity of crown and the scouring of toe at the landward was revealed as the most representative failure example. One of the main factors related to this failure pattern is overflow-induced pressure and velocity. Thus, in this study the analytical equations which can determine the pressure and the velocity induced by overflow in sea dike were proposed and verified. To accomplish this, assumed that the flow is quasi-steady and irrotational, and concentric circular streamlines around the vicinity of crown and toe of the sea dike. Flow was assumed as critical state and Bernoulli equation was used to develop the equations that can determine the pressure and velocity at the vicinity of crown and toe of the sea dike. Using these equations, the pressure and the velocity were calculated in condition of various overflow depths and radiuses of circular streamline. Based on the calculation results, while a negative pressure was occurred at the vicinity of crown, a significant amount of positive pressure occurred at the toe. The existence of flow-induced shear stresses was also confirmed. In addition, the limitation of the proposed equations was discussed.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.72-76
• /
• 1985

Populus alba ${\times}$ P. glandulosa cuttings in nursery bed were inoculated with mycelium of ectomycorrhizal fungus, Pisolithus tinctorius (Pt) to evaluate effectiveness of the fungus in growth stimulation of poplar. Pt was cultured in 1l glass bottles with vermiculite-peatmoss mixture moistened with modified Melin-Norkrans' solution. The nursery bed was arranged for microplots of $1{\times}2m$ in size and fumigated with methyl bromide before inoculation and cutting placement. Fifty cuttings were placed in each microplot and two treatments (fumigation only and fumigation plus Pt inoculation) were replicated three times. At the end of the first growing season, inoculated plants grew 19% faster in height and produced 49% more dry weight (above-ground portion) than uninoculated plants. Survival rate of inoculated cuttings was also improved by 20% over that of uninoculated cuttings. Inoculated cuttings developed abundant fine root system with golden brown zigzag tips. In the middle of September a sporocarp of Pt was produced from an inoculated plot, suggesting successful establishment of mycorrhiza between poplar and Pt fungus.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.215-220
• /
• 2010

Hydrogen is a clean and efficient energy source and is expected to take an important role in future energy demand. A possibly good route to produce hydrogen is by using biomass and organic wastes as a source through thermo-chemical conversion technology. In this study, pyrolysis of wood Pellet(Oregon pine) has been carried out in batch type fixed-bed reactor in $N_2$ atmosphere during 20 minutes to determine the optimum hydrogen generating conditions. At the influence of temperature, hydrogen yield was increased with increasing temperature. For the influence of Steam/Biomass Ratio(SBR), hydrogen yield was increased by steam addition at low temperature condition. However, effect of steam addition was insignificant over at SBR = 1. The hydrogen yield was increased with increasing SBR at high temperature condition. From result of $H_2$/CO and $H_2/CH_4$ ratio, dominant reaction was steam reforming in this experimental condition. The optimum condition for hydrogen production was determined as follows: $H_2$ yield = 38.3 vol.% (56.01 L/min kg) at $900^{\circ}C$, SBR=3.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.4
• /
• pp.217-227
• /
• 2007

The western cherry fruit fly, Rhagoletis indifferens Curran (Diptera:Tephritidae), is the most important pest of cultivated cherries in the Pacific Northwest area of the United States, being widely distributed throughout Oregon, Washington, Montana, Utah, Idaho, Colorado and parts of Nevada. The control of R. indifferens has been based on calendar sprays after its first emergence because of their zero tolerance for quarantine. Therefore, a good prediction model is needed for the spray timing. This study was conducted to obtain the empirical population dynamic information of R. indifferens after overwintering in the major cherry growing area of the Pacific Northwest of the United States, where the information is critically needed to develop and validate the prediction model of the fruit fly. Adult fly populations were monitored by using yellow sticky and emergence traps. Larvae growth and density in fruits were observed by fruit sampling and the pupal growth and density were monitored by pupal collection traps. The first adult was emerged around mid May and a large number of adults were caught in early June. A fruit had more than one larva from mid June to early July. A large number of pupae were caught in early July. The pupae were collected in various period of time to determine the effect of pupation timing and the soil moisture content during the winter. A series of population density data collected in each of the developmental stage were analyzed and organized to provide more reliable validation information for the population dynamic models.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2020

ABL (Airborne Bathymetric LiDAR) is an advanced survey technology that uses green lasers to simultaneously measure the water depths and oceanic topography in coastal and river areas. Seabed point cloud extraction is an essential prerequisite to further utilizing the ABL data for various geographic data processing and applications. Conventional seabed detection approaches often use return waveforms. However, their limited accessibility often limits the broad use of the bathymetric LiDAR (Light Detection And Ranging) data. Further, it is often questioned if the waveform-based seabed extraction is reliable enough to extract seabed. Therefore, there is a high demand to extract seabed from the point cloud using other sources of information, such as geometric information. This study aimed to assess the feasibility of a ground filtering method to seabed extraction from geo-referenced point cloud data by using CSF (Cloth Simulation Filtering) method. We conducted a preliminary experiment with the RIGEL VQ 880 bathymetric data, and the results show that the CSF algorithm can be effectively applied to the seabed point segmentation.

• The Korean Journal of Mycology
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2003

One hundred fifty one specimens of Beauveria spp. from 19 different locations were collected from September 1 to August 31, 2002. Most of the isolates were identified as Beauveria. bassiana. Cordyceps staphylinidaecola collected from Mt. Obong in Chunchon City covered the host with mycelia which were produced 1 to 4 stromata along with asexual spores. The size of bright yellow ununiform stromata were about 45 mm and the head about $17mm{\times}4mm$. Perithecia completely immersed were $530{\sim}550{\times}290{\sim}300{\mu}m$ in size and mainly scattered on the head. Ascospore produced in asci in the size of $400{\sim}450{\times}4{\sim}5{\mu}m$ developed thread-like secondary spores, which were directly separated into secondary conidial spores. Conidia produced at apical portion of synnemata were $2.6{\sim}3.4{\times}1.2{\sim}1.9{\mu}m$ in size. High density of mycelium was observed at $25^{\circ}C$ ranged from pH 6.5 to 8.5 after 11 days of inoculation. It took 15 to 18 days after inoculation to fully grow on the medium mixed brown rice with pupa. Mycelium developed stromata on the medium 30 days after completion of mycelial growth, where perithecia were produced in 40 days.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.309-314
• /
• 2002

Rhtological properties of surimi gel from white fishes by acid (acid surimi) and alkali (alkali surmi) process and effect of chemicals on gelation were investigated by punch and dynamic tests. The breaking force and deformation values of heat-induced gel of acid surimi were less than their values of alkali and conventional surimi gel, and whiteness was greatly decreased, Gel point of acid surimi was decreased but it of alkali surimi was increased with increasing moisture content in the range of 80 to $85\%$. Storage modulus of acid surimi was the highest vaule in pH 6.8, but that of alkali surimi showed high value at neutral and slightly alkali pH. Propylene glycol increased storage modulus in $20\~50^{\circ}C$, hut urea and 2-mercaptoethanol suppressed it. Potassium bromide improved storage modulus in $20~80^{\circ}C$, The results suggest that alkai process is used for making surimi instead of conventional method.