• Wind and Structures
• /
• v.32 no.3
• /
• pp.193-204
• /
• 2021

The estimation of the extreme wind load (effect) under a mean recurrence interval (MRI) is an important task in the wind-resistant design for the structure. It can be predicted by either first-order method or full-order method, depending on the accuracy and complexity requirement. Although the first-order method with the consideration of wind directionality has been proposed, less work has been done on the full-order method, especially with the wind directionality. In this study, the full-order method considering the wind directionality is proposed based on multivariate joint probability distribution. Meanwhile, considering two wind directions, the difference of the corresponding results based on the first-order method and full-order method is analyzed. Finally, based on the measured wind speed data, the discrepancy between these two methods is investigated. Results show that the difference between two approaches is not obvious under larger MRIs while the underestimation caused by the first-order method can be larger than 15% under smaller MRIs. Overall, the first-order method is sufficient to estimate the extreme wind load (effect).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.7
• /
• pp.995-1006
• /
• 2004

This study examines the effects of clothing style and the order effect on impression formation. The instrument of this study consisted of response scales and stimuli. Fifty-one items of 7-point semantic differential scales, 9 items of demographic traits, and 4 items of subjective evaluation scales were developed. Stimuli were color pictures of a model wearing each of two clothing styles(mannish style, feminine style). The sample include 56 male and female subjects in their twenties and thirties. The experimental design was within-subject design and the half of the sample responded to the mannish style first and the other half responded to the feminine style first. Responses to the semantic differential scales were factor analyzed, and seven factors were identified: intellectuality, sensibility, activity, modesty, competence, display, keenness. There were significant differences between mannish style and feminine style in impression of wearer＇s age, job, and physical attractiveness as well as wearer＇s intellectuality and sensibility. It was revealed that the first impression and second impression of wearer＇s intellectuality, sensibility, modesty, competence, display were differed by the function of the order of stimuli shown to the subjects. Both primacy effect and recency effect of order effect were confirmed, and especially negativity effect was influenced prominently on impression formation.

• Journal of Nutrition and Health
• /
• v.29 no.7
• /
• pp.738-746
• /
• 1996

In order to anticipate the physiological function of dietary fibers, glucose and bile acid retarding effects were experimented by using in vitro methods based on dialysis for commercial fibers and dietary fiber residue of food samples. The glucose retarding effect in commercial fibers increased in the order of alginic acid, guar gum, CM-cellulose, citrus pectin > apple pectin > $\alpha$-cellulose and the effect in food fiber residues increased in the order of sea mustard > Korean cabbage, apple > rice bran, barley, soybean, and tangerine. The bile acid retarding effect in commercial fibers increased in the order of citrus pectin, guar gum > CM-cellulose, alginic acid > apple pectin > $\alpha$-cellulose and the effect in food fiber residues increased in the order of barley, rice bran > sea mustard > tangerine > Korean cabbage, soybean > apple. The higher the retarding effect of glucose movement through the dialysis membrane, the more effective the control of the human blood glucose level. As the retarding effect of bile acid movement across the dialysis membrane increased, the human serum cholesterol level correspondingly reduced. Consequently these in vitro methods can be used as a preceding test before undertaking animal and human experiments to predict the physioloical effects of fiber residues from diverse food samples as well as commercially refined fibers.

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.411-420
• /
• 2017

With the increasing popularization of low-priced luxury markets, maintaining the genuine values of luxury has become crucial for luxury fashion brands to attract customers who want exclusivity and rarity. The world-leading luxury fashion houses have employed a variety of experiential marketing strategies like special order product strategies and mobile SNS promotion strategies, yet little research exists on there the strategies actually positively impact brand luxury images and customer attitudes towards the brand. This study empirically analyzed the effects of customer experience of special order products on perceived brand luxury and brand relationship. Furthermore, the study also tested relationships among perceived brand luxury, brand relationship, and brand loyalty. A survey was conducted with Korean female consumers who had purchase experiences of special order products from the brands. We analyzed the data of MTO-experienced respondents due to the lack of respondents who had experienced custom-made product services. The result indicates the significant effect of experience of MTO on brand relationship; however, we found only a partial support for the effect of MTO on brand luxury. Likewise, we found a partial support for the effect of mobile SNS promotion strategies on perceived brand luxury versus full support for the effect on brand relationship.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.873-887
• /
• 2015

The springing response of a large blunt ship was considered to be influenced by a second order interaction between the incoming irregular wave and the blunt geometry of the forebody of the ship. Little efforts have been made to simulate this complicated fluid-structure interaction phenomenon under irregular waves considering the second order effect; hence, the above mentioned premise still remains unproven. In this paper, efforts were made to quantify the second order effect between the wave and vibrating flexible ship structure by analyzing the experimental data obtained through the model basin test of the scaled-segmented model of a large blunt ship. To achieve this goal, the measured vertical bending moment and the wave elevation time history were analyzed using a higher order spectral analysis technique, where the quadratic interaction between the excitation and response was captured by the cross bispectrum of two randomly oscillating variables. The nonlinear response of the vibrating hull was expressed in terms of a quadratic Volterra series assuming that the wave excitation is Gaussian. The Volterra series was then orthogonalized using Barrett's procedure to remove the interference between the kernels of different orders. Both the linear and quadratic transfer functions of the given system were then derived based on a Fourier transform of the orthogonalized Volterra series. Finally, the response was decomposed into a linear and quadratic part to determine the contribution of the second order effect using the obtained linear and quadratic transfer functions of the system, combined with the given wave spectrum used in the experiment. The contribution of the second order effect on the springing response of the analyzed ship was almost comparable to the linear one in terms of its peak power near the resonance frequency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.391-399
• /
• 2008

In this paper, we further generalize the work of Lin and Abel to the case of the first and the second order derivatives of energy release rates for two-dimensional, multiply cracked systems. The direct integral expressions are presented for the energy release rates and their first and second order derivatives. The salient feature of this numerical method is that the energy release rates and their first and second order derivatives can be computed in a single analysis. It is demonstrated through a set of examples that the proposed method gives expectedly decreasing, but acceptably accurate results for the energy release rates and their first and second order derivatives. The computed errors were approximately 0.5% for the energy release rates, $3\sim5%$ for their first order derivatives and $10\sim20%$ for their second order derivatives for the mesh densities used in the examples. Potential applications of the present method include a universal size effect model and a probabilistic fracture analysis of cracked structures.

• Geomechanics and Engineering
• /
• v.11 no.5
• /
• pp.671-690
• /
• 2016

This work presents a static flexure analysis of laminated composite plates by utilizing a higher order shear deformation theory in which the stretching effect is incorporated. The axial displacement field utilizes sinusoidal function in terms of thickness coordinate to consider the transverse shear deformation influence. The cosine function in thickness coordinate is employed in transverse displacement to introduce the influence of transverse normal strain. The highlight of the present method is that, in addition to incorporating the thickness stretching effect (${\varepsilon}_z{\neq}0$), the displacement field is constructed with only 5 unknowns, as against 6 or more in other higher order shear and normal deformation theory. Governing equations of the present theory are determined by employing the principle of virtual work. The closed-form solutions of simply supported cross-ply and angle-ply laminated composite plates have been obtained using Navier solution. The numerical results of present method are compared with those of the classical plate theory (CPT), first order shear deformation theory (FSDT), higher order shear deformation theory (HSDT) of Reddy, higher order shear and normal deformation theory (HSNDT) and exact three dimensional elasticity theory wherever applicable. The results predicted by present theory are in good agreement with those of higher order shear deformation theory and the elasticity theory. It can be concluded that the proposed method is accurate and simple in solving the static bending response of laminated composite plates.

• Multiscale and Multiphysics Mechanics
• /
• v.1 no.1
• /
• pp.15-33
• /
• 2016

In this paper, an asymptotic method is employed to formulate nano- or micro-beams based on strain gradient elasticity. Although a basic theory for the strain gradient elasticity has been well established in literature, a systematic approach is relatively rare because of its complexity and ambiguity of higher-order elasticity coefficients. In order to systematically identify the strain gradient effect, an asymptotic approach is adopted by introducing the small parameter which represents the beam geometric slenderness and/or the internal atomistic characteristic. The approach allows us to systematically split the two-dimensional strain gradient elasticity into the microscopic one-dimensional through-the-thickness analysis and the macroscopic one-dimensional beam analysis. The first-order beam problem turns out to be different from the classical elasticity in terms of the bending stiffness, which comes from the through-the-thickness strain gradient effect. This subsequently affects the second-order transverse shear stress in which the surface shear stress exists. It is demonstrated that a careful derivation of a first strain gradient elasticity embraces "Gurtin-Murdoch traction" as the surface effect of a one-dimensional Euler-Bernoulli-like beam model.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.8 no.2
• /
• pp.1-14
• /
• 2020

Purpose - The current study analyzes effects of hotel restaurant cook's emotional labor on job satisfaction and customer orientation. Research design and methodology - In order to achieve the current study's goal, sample was extracted targeting cooks working in 5-stars hotels located in Seoul considering spatial and time limitation. Method of research was direct research method with survey. Survey was conducted from April 1st, 2018 to April 20, 2018 (approximately 20 days). Total of 300 surveys were distributed to cooks working in 5-stars hotels located in Seoul, and among those 250 surveys were returned. Among returned 250 surveys, 246 surveys. Results - First, in order to test H1, effect of hotel restaurant cook's emotional labor on job satisfaction (satisfaction on superior and coworker) was analyzed. Second, in order to test H2, effect on hotel restaurant cook's emotional labor on job satisfaction (satisfaction on compensation and promotion) was analyzed. Third, satisfaction on superior and coworker had statistically significantly positive effect on customer orientation, while satisfaction on compensation and promotion did not have statistically significant effect. Conclusions - First, deep acting had statistically significantly positive effect on job satisfaction (satisfaction on superior and coworker), while surface acting did not have statistically significant effect. Second, both deep and surface acting had statistically significantly positive effect on job satisfaction (satisfaction on compensation and promotion). Third, satisfaction on superior and coworker had statistically significantly positive effect on customer orientation, while satisfaction on compensation and promotion did not have statistically significant effect.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.503-508
• /
• 2004

Optimal remediation design using the pump and treat(P&T) method and natural attenuation was accomplished in consideration for degradation processes, such as sorption and first-order decay rate. Variation of both sorption and first-order decay rate has influence on design of optimal remediation application. When sorption effect increases, the more pumping rate and pumping wells are required. The location of operated wells is on the centerline of contaminant plume and wells near hot spot are mainly operated when sorption effect increases. The higher of first-order decay rate, the less pumping rate is required. These results show that the degradation processes have to be considered as one of the essential factors for optimal remediation design.