• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.7-13
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.217-218
• /
• 2008

In this paper proposed the solar tracking system to use a fuzzy based on PC in order to increase an output of the PV array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.

• 스마트미디어저널
• /
• 제4권2호
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2196-2202
• /
• 2018

The conventional power system allowed only downstream power flow. Therefore, even if a fault occurs, only the forward current flow is considered. However, with the interest in distributed generation (DG), DGs such as Photovoltaic (PV), Wind Turbine (WT) are being connected to a power system. DGs have many advantages, but they also have disadvantage such as generation of reverse flow. Reverse flow can severely disrupt existing protection systems that only consider downstream power flow. The major problems that may arise from reverse power flow are blinding protection and sympathetic tripping. In order to solve such problems, the methods of installing a directional relay or a fault current limiter is proposed. However, this method is inconceivable because of the economics shortage. Therefore, in this paper, a distance relay installed in existing power system is used to solve the protection problem. Modeling of distance relay has been carried out using ElectroMagnetic Transients Program (EMTP), and it has been verified through simulations that the above problems can be solved by a distance relay.

• 한국통신학회논문지
• /
• 제38C권4호
• /
• pp.394-401
• /
• 2013

최근 해상통신시스템의 성능개선을 위한 연구가 활발히 진행되고 있다. 해상통신시스템의 전송 신뢰도 향상을 위해 본 논문에서는 다중안테나 재전송 기법을 고려하였다. 해상통신 환경 특히 조난을 당한 선박의 경우 무선채널은 변화가 상대적으로 적은 환경으로 재전송에 의해 시간 다이버시티를 얻기 어려운 환경이다. 전송 신뢰도 향상을 위해 재전송이 불가피한 환경이라면 별도의 다이버시티를 얻을 수 있는 방식이 필요하다. 본 논문에서는 다중안테나를 사용하는 해상통신시스템에서 Alamouti 방식의 신호를 구성하여 재전송하는 방식을 제안하고, 비트오류확률과 패킷 수율 향상을 위해 최적의 재전송 신호 우선순위를 정하는 기준을 제시하였다. 제안한 방식은 Alamouti 방식의 재전송 신호를 랜덤하게 선택하는 방식과 단순하게 동일 신호를 재전송하여 Chase Combining을 수행하는 기존의 방식에 비해 비트오류확률과 패킷 수율 성능에서 이득을 얻음을 확인하였다. 제안한 방식은 해상통신 특히 조난 상황에 긴급 정보를 신뢰도 높게 전송하는 것이 필요한 환경에 매우 적합한 방식으로 판단되며, 최근 활발히 논의되고 있는 해상통신시스템의 성능개선에 적용이 가능한 기술로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.240-241
• /
• 2004

JP Nagoya. Inc started special work(passenger order} to transmit information to the passenger from 2001 following the eastern area' heavy rain in 2000. They introduced 'Passenger Information System' which uses self communication network(LAN, PHS) mainly and wire/wireless and internet jointly. As an information transmission method of this system, there is "train information transmission using PHS" which transmits info to LED display in special train. This system configured by adding new equipments and using existing equipments, network in maximum, this study reviewed the system, which transmits real time operation condition unified by these passenger order to passenger in high quality, more promptly.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.280-284
• /
• 2004

안테나의 특성 중 지향성(Directivity)과 관계있는 방사 패턴을 측정하기 위한 저가의 근역장 측정 시스템을 설계한다. 근역장 측정방법은 평면주사법에 기반을 둔 개선된 원통형 주사법 공식을 이용한다. 고가의 측정 장비인 네트워크 분석기를 대체하기 위한 방법을 제시하고 필요한 장치 규격을 제안한다.

• Journal of information and communication convergence engineering
• /
• 제7권1호
• /
• pp.78-85
• /
• 2009

In order to increase system capacity and reduce the transmitting power of the user's equipment, we propose an advanced power control scheme consisting of a modified open-loop power control (OLPC) and closed-loop power control (CLPC) for land mobile satellite communication systems. The improved CLPC scheme, combining delay compensation algorithms and pilot diversity, is mainly applied to the ancillary terrestrial component (ATC). ATC link in urban areas, because it is more suitable to the short round-trip delay (RTD).

• 한국통신학회논문지
• /
• 제15권6호
• /
• pp.475-484
• /
• 1990

Direct Sequence 스펙트럼 확산방식에서 전원동기를 이용한 전원선 통신장치의 구성을 제안한 것이다. 전원선은 주파수대역폭이 일반적으로 10KHz~450KHz로 제한되어 있고, 특히 동기회로가 복잡해져서 제작가격이 높아지며 또한 시스템 규모가 커지며 다중통신하기가 어렵다. 동기회로를 이루기 위해서 교류전원에 동기하는 전원동기 Clock 발생회로를 제안하고 어드레스 설정기를 두어서 다중통신을 가능하게 하였다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.283-288
• /
• 2002

This paper has shown that the impulse and the unit step responses of 2nd-order systems can be computed by an analytic method. Three different 2nd-order systems are investigated: the prototype system, the system with one LHP(left half plane) real zero and the system with one RHP(right half plane) real zero. It has also shown that the effects of the LHP or the RHP zero are very serious when the zero is getting closer to the origin on the complex plane. Based on these analytic results, this paper has presented two sufficient and necessary conditions for 2nd-order linear SISO(single-input/single-output) stable systems to have the nonovershooting and the monotone nondecreasing step response, respectively. The latter condition can be extended to the sufficient conditions for the monotone nondecreasing step response of high-order systems.