• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.57-65
• /
• 2002

The Electrical Power System (EPS) shall supply required power to maintain spacecraft and payload during the mission. The EPS sizing are based on space environment, satellite mission and lifetime, and allocated budgets. The type of the primary and secondary power is determined according to satellite design-level and allocated subsystem budgets. The design of EPS has closely related to system and others' subsystems design. To supply the sufficient power to the satellite, the implementation of the larger power source and energy storage is impossible actually. And there will be some problems of the attitude control of the satellite, the handling power capability of the electronic boxes, and launch vehicle selection caused by EPS oversizing. Also, the thermal control is not easy in the space by extra power. And the maintenance of the satellite within the specific orbit from orbit-drag is a big design burden of the thruster. So the various technologies have been developed to optimize the EPS sizing and to operate the power system efficiently.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.42-49
• /
• 2010

CSSA(Coarse Sun Sensor Assembly) is the essential sensor for satellite attitude control. CSSA measures the direction of the sun's rays and determines whether the satellite is in the eclipse or not. The paper shows the development process and test results of CSSA flight model for low earth orbit satellite. After analyzing the functional test results, we can make a decision whether the unit meets the requirements. We needs the definite and precision procedure and lots of experience. We could improve those through the development of Qualified Model for CSSA and so obtain the results to meet the functional requirement at the Flight model.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.227-235
• /
• 2012

The InSAR (Interferometric SAR) processing steps for DEM generation consist of the coregistration of two SAR data, interferogram generation, phase filtering, phase unwrapping, phase to height conversion, and geocoding, etc. In this study, we developed the precise algorithm for phase to height conversion, including the ambiguity method taking into account Earth ellipsoid, Schw$\ddot{a}$visch method, and the refined ambiguity method suitable for the interferometric pair with non-parallel obit. From the testing with JERS-1 orbit we found that the height error by traditional ambiguity method reaches to about 40 m during phase to height conversion. The proposed methods are very useful in generating precise InSAR DEM;especially in the case of using non-parallel InSAR pair due to unstable orbit control such as JERS-1 or intentional orbit control such as Cross-InSAR pair between ERS2 and ENVISAT satellite.

• Korean Journal of Remote Sensing
• /
• v.22 no.4
• /
• pp.285-294
• /
• 2006

A numerical formula that presents relationship between a point of a satellite image and its ground position is called a sensor model. For precise geolocation of satellite images, we need an error-free sensor model. However, the sensor model based on GOES ephemeris data has some error, in particular after Image Motion Compensation (IMC) mechanism has been turned off. To solve this problem, we investigated three sensor models: collinearity model, direct linear transform (DLT) model and orbit-based model. We applied matching between GOES images and global coastline database and used successful results as control points. With control points we improved the initial image geolocation accuracy using the three models. We compared results from three sensor models. As a result, we showed that the orbit-based model is a suitable sensor model for precise geolocation of GOES-9 Images.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.4
• /
• pp.217-227
• /
• 2021

In this study, we describe an analytical process for designing a low Earth orbit constellation for discontinuous regional coverage, to be used for a surveillance and reconnaissance space mission. The objective of this study was to configure a satellite constellation that targeted multiple areas near the Korean Peninsula. The constellation design forms part of a discontinuous regional coverage problem with a minimum revisit time. We first introduced an optimal inclination search algorithm to calculate the orbital inclination that maximizes the geometrical coverage of single or multiple ground targets. The common ground track (CGT) constellation pattern with a repeating period of one nodal day was then used to construct the rest of the orbital elements of the constellation. Combining these results, we present an analytical design process that users can directly apply to their own situation. For Seoul, for example, 39.0° was determined as the optimal orbital inclination, and the maximum and average revisit times were 58.1 min and 27.9 min for a 20-satellite constellation, and 42.5 min and 19.7 min for a 30-satellite CGT constellation, respectively. This study also compares the revisit times of the proposed method with those of a traditional Walker-Delta constellation under three inclination conditions: optimal inclination, restricted inclination by launch trajectories from the Korean Peninsula, and inclination for the sun-synchronous orbit. A comparison showed that the CGT constellation had the shortest revisit times with a non-optimal inclination condition. The results of this analysis can serve as a reference for determining the appropriate constellation pattern for a given inclination condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.133.2-133.2
• /
• 2009

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.65-70
• /
• 1989

Lately, at an epock of a full-scale satellite launching plan of Korea, T.T.C(Tracking, Telemetery & Command) is a indispensable part. In this paper, particular attention is given to orbit determination problem of the role of T.T.C. A near-earth satellite is modeled, batch and extended sequential estimation algorithm (ESEA) are compared using range data. As a result, ESEA show effectiveness.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.401-408
• /
• 2016

During daylight, the solar array of low earth orbit satellites harvests electrical power to operate satellites. The power conversion of the solar array is carried out by control of the operation point using the solar array regulator when the solar array faces the sunlight. Thus, the design of the solar array should comply with not only the power requirement of satellite system but also the input voltage requirement of the solar array regulator. In this paper, the design requirements of the solar array for low earth orbit satellites are defined, and the means of satisfying these requirements are described. In addition, the architecture of a multi-distributed interface is suggested to maximize the power harvested from a solar array having high temperature deviation between each panel. The power analysis in this paper shows the optimal number of multi-distributed interfaces with a converter.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.557-560
• /
• 2005

The Korea Multi-Purpose SATellite-2 (KOMPSAT -2) will be launched into a circular sun synchronous orbit in Dec. 2005. For the mission operation of the KOMPSAT-2 satellite, KARl Ground Station (KGS) consists of the Mission Control Elements (MCE), Image Reception & Processing Elements (IRPE) and the overseas stations. For the oversea stations, the Kongsberg Satellite Services (KSAT) is the prime supplier of support service. KSAT has the capability to provide Tracking Telemetry and Commanding (TT&C) nominal, contingency and anomaly support for every single orbit for most polar orbiting satellites. Also KSAT provides nodal service through the network management functionality for all oversea ground stations. This paper describes the oversea stations and the support for Launch and nominal TT&C services for KOMPSAT-2 and the operation plan for KOMPSAT-2.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.614-619
• /
• 1988

In this paper, an arbitrary mission of a spacecraft from launch to orbit injection is investigated for some launch trajectories. Launch sites are selected arbitrarily from various locations in Korea. For this study, a general purpose simulation program is developed. In this program, the Earth is assumed to be a rotating ellipsold. The launch vehicle is treated as a 3-D, 6-DOF rigid body. The developed program has been evaluated by calibrating it to the 3-stage N-1 rocket developed in Japan and launched at Tanegasima. The simulated trajectory from the first-stage ignition to burnout of third-stage main engine is compared with the previously tested N-1 rocket trajectory in Japan. The result shows that the program works properly. Using the proven program, we have investigated possible launch locations in Korea, namely Marado, Sungsan and Kuryongpo. The problem of polar orbit injection is also examined.