• 한국농공학회지
• /
• 제43권6호
• /
• pp.135-142
• /
• 2001

Laboratory experiment was performed to evaluate the influence of mixing conditions to the strength of solidified sandy soils with cement. The major physical factors considered in this experiment were the fine particles content(<$\sharp200%$), cement content(%) and water-cement ratio, and unconfined compressive strength test was performed on the samples at 7 and 28 cured day. The results of tests shows that when the cement content is relatively low (7~10 percents) the fine content in the sandy soils is very important, but when cement content is high the water-cement ratio became more important. It was appeared that in the range of the cement content of 7~10 percents, about 20~30 percents of fine content to the total sample weight is the optimum condition to get the maximum strength. In the case of the cement content of 13 percents, the strength of sample was considerably affected by the water-cement ratio rather than the fine content. In this paper, empirical equations were also developed and evaluated to verify the relationship among three factors by the multi-regression analysis.

• 한국작물학회지
• /
• 제27권2호
• /
• pp.175-181
• /
• 1982

사양토에서 인삼생육의 최적 토양 함수량 구명키 위해 토양함수량별 지상하부, 생식생장, 광합성 등을 조사한 바 그 결과는 다음과 같다. 1. 근건물중 및 동직경은 62%(절대수분 13.9%)가 가장 양호하였다. 2. 엽면적, 엽건물중은 62%(절대수분 13.9%)가 가장 양호하였으며 개체당 개화수, 결실율, 종자생산량도 같은 경향이었다. 3. 단위 면적당 광합성량은 토양 함수량이 많을수록 증가하였으나 개체당 광합성량은 62%가 가장 양호하였다. 4. 증산량은 토양함수량과 비례하였으나 기공의 밀도는 반비례하였다.

• Advances in concrete construction
• /
• 제8권2호
• /
• pp.127-137
• /
• 2019

Roller Compacted Concrete (RCC) is a zero slump concrete consisting of a mixture of cementitious materials, sand, dense graded aggregates and water. In this study, an attempt has been made to investigate the effect of aggregate type on strength and abrasion resistance of RCC made by using granulated blast furnace slag (GGBS) as partial replacement of cement. Mix proportions of RCC were finalized based upon the optimum water content achieved in compaction test. Two different series of RCC mixes were prepared with two different aggregates: crushed gravel and limestone aggregates. In both series, cement was partially replaced with GGBS at a replacement level of 20%, 40% and 60%. Strength Properties and abrasion resistance of the resultant mixes was investigated. Abrasion resistance becomes an essential parameter for understanding the acceptability of RCC for rigid pavements. Experimental results show that limestone aggregates, with optimum percentage of GGBS, perform better in compressive strength and abrasion resistance as compared to the use of crushed gravel aggregates. Observed results are further supported by stoichiometric analysis of the mixes by using basic stoichiometric equations for hydration of major cement compounds.

• 대한환경공학회지
• /
• 제35권11호
• /
• pp.803-808
• /
• 2013

본 연구의 목적은 칼슘염을 함유한 레미콘 슬러지를 이용하여 불소함유폐수를 물에 난용성인 $CaF_2$ 화합물 형태로 침전시켜 처리하는데 있어 pH, 레미콘슬러지 주입량, Seed물질 주입량, 교반속도, 교반시간의 최적 조건을 도출하고자 하는데 있다. 실험결과 레미콘 슬러지를 이용한 대상폐수의 $CaF_2$ 침전 반응에서 함수율 및 불소의 제거효율 등을 고려할 경우 최적의 pH 6, 레미콘 슬러지 주입량은 10 g/L, Seed 물질 주입량은 2 g/L, 교반속도은 100 rpm, 교반시간은 60 min으로 관찰되었다. 이 때 Seed 물질의 주입은 불소제거효율에는 영향이 없는 것으로 나타났지만 침전물의 형성이 되는 반응을 촉진시키고 플럭형성을 원활하게 하여 고액 분리가 잘 되어 함수율이 낮아지는 결과가 나타났다.

• 한국지반환경공학회 논문집
• /
• 제9권1호
• /
• pp.47-54
• /
• 2008

본 연구에서는 통상 토사비탈면 안정해석시 지반강도의 입력값으로 사용되는 Mohr-Coulomb 강도정수에 대하여 지반의 함수비 조건이 미치는 영향을 조사하였다. 이를 위하여 국내 절토사면에서 채취한 두 종류의 풍화토 시료와 댐 건설시 사용되는 코아재를 대상으로 함수비 조건을 달리하며 직접전단시험을 수행하였다. 다짐시험을 통해 결정한 4단계의 함수비 조건(건조측, 최적, 습윤측, 포화)에 대해서 각 시료들의 연직응력과 최대 전단응력간의 관계로부터 산정한 Mohr-Coulomb의 ${\phi}_{peak}$과 $c_{peak}$를 비교한 결과, 전체적으로 모든 시료에 대해서 함수비가 증가함에 따라 ${\phi}_{peak}$은 큰 변화가 없으나 $c_{peak}$은 점차적으로 감소하였으며, 개략적으로 각각의 변화 비율을 분석한 결과, 함수비 조건이 건조측에서 최적, 습윤, 포화의 순서로 진행되어 변함에 따라 ${\phi}_{peak}$값은 일정하되, $c_{peak}$값은 건조측 $c_{peak}$값을 기준으로 약 25%씩 감소하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.132-137
• /
• 1993

The purpose of this study is to evaluate the quality characteristics of concrete using super plasticizer which is on the market within the country. For this purpose, nine kinds of super plasticizer are compared and analyzed for the slump , air content, unit weight, water-reducing percent and ratios of compressive strength with admixture content. As a result, the optimum quantity of admixture content were obtaining for ordinary and high strength concrete using super plasticizer.

• 환경위생공학
• /
• 제15권3호
• /
• pp.24-30
• /
• 2000

In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The result are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 39%(kudzu), 37%(sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/N ratio 25 indicated $68^{\circ}C$(kudzu), $70^{\circ}C$(sawdust). Optimum condition of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation gravitationally dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively. Major biological reaction in the aerobic fermentation feed production occurred during 12~24hrs.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.64-69
• /
• 2013

이 연구논문의 주요 목적은 하수슬러지와 생활폐기물을 혼합소각할 경우, 소각시설의 안정적 운영을 위해 가장 중요한 변수인 하수슬러지의 정량공급 방안에 관한 것이다. 실험결과, 슬럼프테스트와 유동화테스를 통해 함수율을 약 87%로 정량공급할 경우, 하수슬러지의 표면연소를 보완하여 완전연소가 이루어 질 것으로 판단되어 향후 생활폐기물과 하수슬러지 혼합소각시 소각시설의 안정화에 기여할 것으로 판단된다.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.916-921
• /
• 2009

This study was aimed to both enhance the fluoride removal and to reduce the phosphorus removal in treating semiconductor wastewater using $Ca(OH)_2$ at low pH so as to facilitate struvite crystallization reaction. The struvite crystallization could be introduced after fluoride removal by retaining the phosphorus source. As the results, the method applied in this study achieved high fluoride removal efficiency (about 91%) with retardation of phosphorus removal at pH 4, compared to conventional methods where the removal of fluoride and phosphorus were done at pH 11. Therefore, the fluoride removal at low pH would contribute to the enhancement of nitrogen and phosphorus removals in a consecutive struvite crystallization reactor. Treatment of semiconductor wastewater at low pH using $Ca(OH)_2$ also had lower (about 20%) water content of precipitated sludge compared to conventional method. As the molar ratio of Ca to F increased the removal efficiencies of fluoride and phosphorus increased. Although the amount of seed dosage didn't affect the removal of fluoride and phosphorus, its increase reduced the water content of precipitated matter. Finally, considering consecutive struvite reaction, the optimum condition for the removal of fluoride and phosphorus was as follow: pH: 4, the molar ratio of Ca:F: 1:1.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.177-186
• /
• 2019

In this study, we investigated for synthetic hydrotalcite in chloroprene rubber foam. Experiments were carried out to find the optimum content ratio by controlling the contents of MgO and Hydrotalcite. Swelling test in toluene immersion was made to measure the crosslinking density of CR foams, and the cure properties were investigated with flat die rheometer and Mooney viscosity. The difference of hardness, tensile strength and elongation at break were observed after immersing in 7% NaCl or 21% NaCl solutions for a day and four days. In addition, the volume change and water content remaining in CR foam were measured after immersing NaCl solution. As content of MgO increased, the value of the cure torque tended to increase, but it was almost constant above 2phr of MgO. However, the Mooney viscosity decreased with increasing MgO content. The crosslinking density, determined by the swelling ratio, showed that the CR compound without MgO showed a higher degree of swelling. When the content of hydrotalcite/MgO was 3:2, it was the lowest volume change of CR form. Also, As the content of hydrotalcite decreased, the difference of mechanical properties before and after immersion NaCl solution increased.