Browse > Article
http://dx.doi.org/10.5764/TCF.2019.31.3.177

Effect of Synthetic Hydrotalcite on Salt Water Resistance of Chloroprene rubber Foam  

Park, Eun Young (Korea Institute of Footwear and Leather Technology)
Seo, Eun Ho (Korea Institute of Footwear and Leather Technology)
Lim, Sung Wook (Korea Institute of Footwear and Leather Technology)
Publication Information
Textile Coloration and Finishing / v.31, no.3, 2019 , pp. 177-186 More about this Journal
Abstract
In this study, we investigated for synthetic hydrotalcite in chloroprene rubber foam. Experiments were carried out to find the optimum content ratio by controlling the contents of MgO and Hydrotalcite. Swelling test in toluene immersion was made to measure the crosslinking density of CR foams, and the cure properties were investigated with flat die rheometer and Mooney viscosity. The difference of hardness, tensile strength and elongation at break were observed after immersing in 7% NaCl or 21% NaCl solutions for a day and four days. In addition, the volume change and water content remaining in CR foam were measured after immersing NaCl solution. As content of MgO increased, the value of the cure torque tended to increase, but it was almost constant above 2phr of MgO. However, the Mooney viscosity decreased with increasing MgO content. The crosslinking density, determined by the swelling ratio, showed that the CR compound without MgO showed a higher degree of swelling. When the content of hydrotalcite/MgO was 3:2, it was the lowest volume change of CR form. Also, As the content of hydrotalcite decreased, the difference of mechanical properties before and after immersion NaCl solution increased.
Keywords
synthetic hydrotalcite; chloroprene rubber foam; salt water resistance; crosslinking density; flat die rheometer;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. R. Scagliusi, S. G. Arajo, L. Landini, and A. B. Lugao, Study of Properties of Chloroprene Rubber Devulcanizate by Radiaion in Microwave, 2009 International Nuclear Atlantic Conference- INAC, Rio de Janeiro, Vol.41, p.8, 2009.
2 A. N. Gent, "Engineering with Rubber : How to Design Rubber Components", Hanser Gardner Publications, Cincinnati, pp.53-87, 2001.
3 R. B. Bagwell and G. L. Messing, Effect of Seeding and WaterVapor on theNucleation andGrowth of ${\alpha}-Al_2O_3$ from ${\gamma}-Al_2O_3$, Journal of the American Ceramic Society, 82(4), 824(1999).
4 H. W. Starkweather and H. W. Walker, Water Resistance of Neoprene, Industrial and Engineering Chemistry, 29(12), 1380(1937).   DOI
5 C. Misra and A. J. Perrotta, Composition and Properties of Synthetic Hydrotalcites, Clays and Clay Minerals, 40(2), 145(1992).   DOI
6 K. Chibwe and W. Jones, Intercalation of Organic and Inorganic Anions into Layered Double Hydroxides, J. Chem. Soc. Chem. Commun., 5(3), 926(1989).
7 D. Lopez, I. Cendoya, F. Torres, J. Tejada, and C. Mijangos, Preparation and Characterization of Poly(vinyl alcohol)-based Magnetic Nanocomposites 1. Thermal andMechanical Properties, Journal of Applied Polymer Science, 82(13), 3215(2001).   DOI
8 X. Jiang, Modification of Poly(vinyl alcohol) Films by theAddition of Magnesium Chloride Hexahydrate, Polymer Engineering and Science, 52(7), 1565(2012).   DOI
9 M. Meyn, K. Beneke, and G. Lagaly, Anion-exchange Reactions of Layered Double Hydroxides, Materials Sciences and Application, 2(6), 5201(1990).
10 K. A. Carrado, A. Kostapapas, and S. L. Suib, Layered Double Hydroxides, Solid State Ionics, 26, 77(1988).   DOI
11 W. T. Reichle, Synthesis of Anionic Clay Minerals (Mixed Metal Hydroxides, Hydrotalcite), Solid State Ionics, 22, 135(1986).   DOI
12 I. Franta, "Elastomers and Rubber Compounding Materials : Manufacture, Properties and Applications", Elsevier Science Publishers, New York, pp.375-407, 1989.
13 R. F. Ohm, "The Vanderbilt Rubber Handbook 3rd Ed.", R. T. Vanderbilt Company Inc., Norwalk, pp.387-389, 1990.
14 B. Adhikari and D. D.Maiti, Reclamation and Recycling of Waste Rubber, Progress in Polymer Science, 25(7), 909(2000).   DOI