• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.115-130
• /
• 2005

This paper presents the effects of indirect costs on Life-Cycle-Cost(LCC) effective optimum design of steel-box girder bridges. The LCC formulations considered in the LCC optimization of the bridges consist of initial cost and expected rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, and indirect costs such as road user costs and indirect socio-economic losses. To demonstrate the LCC-effectiveness for optimum design of the bridges, an actual steel box girder bridge having two continuous spans(2@50m=100m) is considered as a numerical example. And also, in this paper, various sensitivity analyses are performed to investigate the effects of indirect costs caused by traffic conditions such as number of detour route, number of lane on detour route, length of detour route, and traffic volumes on the LCC-effective optimum design. From the numerical investigations, it may be concluded that indirect costs caused by traffic network may sensitively influence on the LCC-effective optimum design of steel-box girder bridges. Therefore, it may be stated that the traffic conditions should be considered as one of the important items in the LCC-effective optimum design of the bridges.

• Management Science and Financial Engineering
• /
• v.7 no.2
• /
• pp.13-30
• /
• 2001

This paper discusses a paradox in an Indefinite Quadratic transportation Problem. Here, the objective function is the product of two linear functions. A paradox arises when the transportation problem admits of a total cost which is lower than the optimum cost, by transporting larger quantities of goods over the same route. A sufficient condition for the existence of a paradox is established. Paradoxical Range of flow is obtained for any given flow in which the corresponding objective function value is less than the optimum value of the given transportation problem. It is illustrated with the help of a numerical example.

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.76-84
• /
• 2013

The main objective of study was to determine the optimum level of bus service by bus route types for the effective improvement of bus route operating in semi-public transportation management. In pursuing the above, this study proposed to classify by bus route types based on publicity, profitability and potentiality. Using this methods of the classification, 113 bus routes in Busan were classified into bus routes of 8 types. And this study proposed desirable management of bus route operation according to 8 bus route types considering 9 bus operating characteristics such as bus route distance, operating number, state of passing through the CBD and so on. For proposing the desirable management, it was to do a statistical analysis of PCA(Principal Components Analysis) and to abbreviate 9 variables to 3. And it was drawn a conclusion effectively by making comparison between 8 bus rout types and 3 bus operating characteristics.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.570-579
• /
• 2016

This study proposes a concept of Stepwise Transfer Coefficient(STC) which implies greater transfer cost with increasing the number of transfers. Thus, the public transport information system provides the choice sets of travel routes by the consideration of not only transportation time but also the optimum number of transfers. However, path choice problems that involve STC are found to include non additive cost, which requires additional route enumeration works. Discussions on route enumeration in actual transportation networks is very complicated, thereby warranting a theoretical examination of route search considering STC. From these points of view, this study results in a probability based transit trip assignment model including STC. This research also uses incoming link based entire route deletion method. The entire route deletion method proposed herein simplifies construction of an aggregation of possible routes by theoretically supporting the process of enumeration of the different routes from origin to destination. Conclusively, the STC reflected route based logit model is proposed as a public transportation transit trip assignment model.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.677-686
• /
• 2014

Sea ice covers wide area in Terra Nova Bay in East Antarctica where the Jangbogo Antarctic Research Station was built in 2014, which affects greatly on the sailing of an icebreaker research vessel. In this study, we analyzed the optimum sea route and sailable period of the icebreaker to visit the Jangbogo Antarctic Research Station by using sea ice concentration data observed by passive microwave sensors such as Special Sensor Microwave/Imager (SSM/I) and Special Sensor Microwave Imager/Sounder (SSMIS) for the last decade, and by using sea route of the Araon, an icebreaker of Republic of Korea, from 2010 to 2012. It is found that Araon sailed in the route of sea ice concentration up to 78%. Sailing speed of the Araon decreased due to increasing sea ice concentration. However, Araon maintained the speed close to the average speed for the entire sailing period (~11 kn) in the route of sea ice concentration up to 70%. Therefore, we confirm that the Araon can sail typically in the route which shows sea ice concentration below 70%. We derived annually available sailing period in recent 10 years for the sea route of the Araon in 2010, 2011 and 2012, which is defined as the period showing sea ice concentration below 70% through the route. Maximum sailable period was analyzed to be 61 and 62 days for the route of the Araon in 2010 and 2011, respectively. However, the typical sailing in the routes was unavailable in some years because sea ice concentration was higher than 70% through the routes. Meanwhile, the sailable period for the routes of the Araon in 2012 was observed in every year, which was a minimum of 15 days and is a maximum of 89 days. Therefore, we could suggest that optimum route of icebreaker to visit the Jangbogo Antarctic Research Station is the route of the Araon in 2012. High resolution images from SAR or optical sensors are necessary to investigate sea ice condition near shoreline of Jangbogo research station due to several kilometers of low resolution of sea ice concentration.

• Journal of the Korean Institute of Navigation
• /
• v.11 no.2
• /
• pp.1-31
• /
• 1987

Nowadays, the transportation of almost all cargoes depends on sea routes in international trade. In the transaction of trade, cargo transportation must be completed on the base of two contrary objectives, one of which is to protect the vessel, cargoes and crew aborad her safely through every step of the transportation and the other is to pursue profits from the transaction of the trade. In spite of the great development of the modern techniques in shipbuilding today, many sea disaters of big merchant vessels have been occurring successively in winter seasons every year on the sea routes of the North Pacific Ocean. Whenever the accident of losing a vessel in rough sea occurred , many experts of the country to which the vessel belonged had tried to take out the reason of the missing without manifesting the exact cause of the unhappy occurrence. In this paper, we calculated ocean wave status along the route of the North Pacific Ocean theoretically concluded by us as optimum on the basis of weather and sea conditions. In the calculation, we used ITTC wave spectrum formula and meteorological data of "Winds '||'&'||' Waves of the north Pacific Ocean" edited by Ship Research Institute of Japan on the basic data assembled by World Meterological Organization through past 10 years. We selected three sample vessels of most common size in the North Pacific Ocean Routes, a container, a log carrier and a bulk carrier and applied tree sample vessels to the calculated sea conditions for getting the rolling angles of the vessels and stress exerting on the hulls. Examining the calculated results, we concluded as follows; 1. Under the condition of these status7 by beaufort scale, "heave to" maneuvering is the best and safest way to steer every vessel. 2. The most dangerous part of sea area along the west bound optimum route of the North Pacific Ocean in winter season, is the southern sea area of the Kamchatka peninsula.a peninsula.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.46-54
• /
• 1986

Driving pattern of gasoline passenger car was measured and analyzed at some areas(6urban area routes, 4 radial routes, 4 circular routes)in Seoul city. Measured items were vehicle speed, engine speed, intake manifold vacuum, and fuel consumption. Driving pattern data were reappearanced with engine dynamometer. Results of this investigation might be summarized as below; 1. When we compared urban area route with radial or circular route in rush hour, it was found that the average vehicle speed was measured to be lower about 25% and fuel consumption to be higher about 12% in urban area route. 2. Average vehicle speed was measured to be higher about 30% and driving resistance output to be higher about 25% in non-rush hour, but average fuel economy was increased a little. 3. On the bases of average fuel economy and characteristics of exhaust emissions, optimum driving vehicle speed was found about 60 km/h in the 4th(top)and about 40km/h in the 3rd in driving of experimental engine. 4. Idling frequency and exhaust emissions of CO,HC were related to idling closely. But exhaust emission of NOx, which had nothing to do with idling frequency, had relation to acceleration time ratio.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.51-57
• /
• 2008

This study has been performed to define the standard of runoff coefficients which are applicable to the process of route design or various public facilities design. The application of accurate runoff coefficients is very important in construction works due to the fact that the abnormal weather and torrential downpour are raising. However, in Korea society, as planner's subjective judgement of an object region status would make the application of erroneous runoff coefficients, many problems have been occurred. Consequently, in this study, we could perform terrain analysis and rainfall basins extraction with GIS technoques and suggest the application standard of runoff coefficients in accordiance to terrain characteristics and the land covers. By having the application of the study results to past flooded areas, we could suggest improved plans.

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.507-511
• /
• 2017

An optimum route to fabricate oxide dispersion strengthened ferritic superalloy with desired microstructure was investigated. Two methods of high energy ball milling or polymeric additive solution route for developing a uniform dispersion of $Y_2O_3$ particles in Fe-Cr-Al-Ti alloy powders were compared on the basis of the resulting microstructures. Microstructural observation revealed that the crystalline size of Fe decreased with increases in milling time, to values of about 15-20 nm, and that an FeCr alloy phase was formed. SEM and TEM analyses of the alloy powders fabricated by solution route using yttrium nitrate and polyvinyl alcohol showed that the nano-sized Y-oxide particles were well distributed in the Fe based alloy powders. The prepared powders were sintered at 1000 and $1100^{\circ}C$ for 30 min in vacuum. The sintered specimen with heat treatment before spark plasma sintering at $1100^{\circ}C$ showed a more homogeneous microstructure. In the case of sintering at $1100^{\circ}C$, the alloys exhibited densified microstructure and the formation of large reaction phases due to oxidation of Al.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1997

Finding the optimum route of ship's pipes is complicated and time-consuming process. Experience of designers is the main tool in this process. To reduce design man-hours and human errors a design expert system shell and a geometric modeler is used to automate the design process. In this paper, a framework of the intelligent CAD system for pipe auto-routing is suggested, which consists of general-purpose expert system shell and a geometric modeler. The design expert system and the geometric modeling kernel have been integrated. The CADDS5 of Computervision is used as the overall CAD environment. The Nexpert Object of Neuron Data is used as the expert system shell. The CADDS5 ISSM is used as the interface that creates and modifies geometric models of pipes. Existing algorithms for the routing problem have been analyzed. Most of them are to solve the 2-D circuit routing problems. Ship piping system, specially within the engine room, is a complicated, large scale 3-D routing problem. Methods of expert system have been used to find the route of ship pipes on the main deck.