• 한국강구조학회 논문집
• /
• 제18권2호
• /
• pp.181-189
• /
• 2006

본 연구는 FSM 공법의 PSC 박스 거더교를 최소경비로 자동 설계하는 최적설계 프로그램을 이용하여 곡률마찰계수와 파상마에 대한 적정한 긴장재의 종류를 찾아내고 향후 긴장재의 연구 개발 방향을 제시하였으며, 사용되는 재료의 강도증진에 대한 연구방향을 제시하는데 본 연구의 목적이 있다. 사용된 최적설계 프로그램은 축차 무제약 최소화 기법을 이용하였고, 설계과정에서 설계점들이 설계가능 영역밖에 있는 것을 허용할 수 있도록 Kavlie가 제안한 확장 벌칙함수를 도입하였다. 또한 설계점들의 탐사 방법은 Powel's direct search method를 사용하며, 설계시간을 단축시키기 위해 설계점 변화에 따른 단면력 변화를 Gradient를 이용하여 근사화 시키는 방법을 사용하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1084-1089
• /
• 2008

In this paper, a method for determining the boundary conditions which are derived from the random obstacles on the curves was presented. An algorism using this method is also developed. This determination method can be used for a good engineering tool in optimal curve design and an Radius-transition curve length(R-$L_t$) combination within the permissible zone can be improved without any increased costs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.238-240
• /
• 1996

This paper presents the optimum design of the slit type linear induction motor(LIM). For the analysis of the slit type LIM, as the boundary problem, the equivalent circuit is composed from the analysis method given the slit pitch boundary condition. Using the deterministic method and the stochastic method among the optimization methods, each of the optimum design variables is derived. The analysis result by the proposed method is compared with the experimental result.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.745-750
• /
• 2007

In this paper, we propose a new gate modification method using the input vector maximizes the number of gates in WLS within the optimum range of the minimum leakage power. We prove that MLV is not always the optimal solution, and that the leakage power and area can decrease when modifying the gates using the input vector for which the number of gates in WLS is maximized within the optimum range of the minimum leakage power for the circuits applying the IVC technique and gate modification method. Using the proposed method, the gate-level description circuit can be converted to the modified circuit which reduces the leakage power by chip designer, and the modified circuit can be applied without any modification in design flow.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.121-130
• /
• 2018

This study deals with optimum geometry design of laterally loaded piles in a Winkler's medium through the Fully Stressed Design (FSD) method. A numerical algorithm distributing the mass by means of the FSD method and updating the moment by finite elements is implemented. The FSD method is implemented here using a simple procedure to optimise the beam length using an approach based on the calculus of variations. For this aim two conditions are imposed, one transversality condition at the bottom end, and a one sided constraint for moment and mass distribution in the lower part of the beam. With this approach we derive a simple condition to optimise the beam length. Some examples referred to different fields are reported. In particular, the case of laterally loaded piles in Geotechnics is faced.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.205-210
• /
• 2007

The integration method of binary and real encoding in genetic algorithm is proposed to deal with design variables of various types in gear drive design. The method is applied to optimum design of multi-stage gear drive. Integer and Discrete type design variables represent the number of teeth and module, and continuous type design variables represent face width, helix angle and addendum modification factor etc. The proposed genetic algorithm is applied for the gear ratio optimization and the volume optimization(minimization) of multi-stage geared motor which is used in field. In result, the proposed design optimization method shows an effectiveness in optimum design process and the new design has a better results compared with the existing design.

• Steel and Composite Structures
• /
• 제25권4호
• /
• pp.473-484
• /
• 2017

In this study a seismic retrofit scheme for a building structure was presented using steel plate slit dampers. The energy dissipation capacity of the slit damper used in the retrofit was verified by cyclic loading test. Genetic algorithm was applied to find out the optimum locations of the slit dampers satisfying the target displacement. The seismic retrofit of the model structure using the slit dampers was compared with the retrofit with enlarging shear walls. A simple damper distribution method was proposed using the capacity spectrum method along with the damper distribution pattern proportional to the inter-story drifts. The validity of the simple story-wise damper distribution procedure was verified by comparing the results of genetic algorithm. It was observed that the capacity-spectrum method combined with the simple damper distribution pattern leaded to satisfactory story-wise distribution of dampers compatible with the optimum solution obtained from genetic algorithm.

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.359-366
• /
• 2003

Ecological society and energy conservative systems has become a subject of world wide attention. To examine the technologies of such systems as resource recycling society, this study is proposed for using rainwater as energy source and water resources in urban area. Useful informations for planning of utilizing rainfall as energy source, water resources, emergency water and controlling flood are discussed with model systems in urban area. It is calculated that the rate of utilizing rainwater, amounts of utilizing rainwater, substitution rate of supply water, amounts of overflow rainwater according to rain storage tank volume. By applying the past weather data, The optimum volume of rain water storage was calculated as 200m$^3$ which mean no benefits according to the increase of storage tank volumes. For optimum planing and control method at the model system, several running method of rainwater storage tank was calculated. The optimum operating method was the using weather data as 3hours weather forecast.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권12호
• /
• pp.596-607
• /
• 2006

This paper presents Single Phase Switched Reluctance Motor (SPSRM) optimum design for vacuum cleaners using Response Surface Methodology (RSM) to determine geometric parameters, and the 2-D Finite Element Method (FEM) has been coupled with the circuit equations of the driving converter. Additionally, an optimum process for SPSRM has been proposed and peformed with geometric and electric parameters thereby influencing the inductance variation and effective torque generation as design variables. SPSRM performances have also been analyzed to determine an optimal design model for maximized efficiency at high power factor. In order to confirm the propriety of the Finite Element Method and motor performance calculation, simulation waveform and experiment waveform for motor voltage and current were compared.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.40-45
• /
• 2005

This paper has presented an application of an optimum grinding conditions based on the fuzzy logic. Fuzzy logic can handle vague and uncertain knowledge, and presents a scheme for integrating data with various kinds of grinding data. Especially, this research is capable of determining the grinding conditions taking into account some fuzzy membership function represented for trapezoidal form such as hardness and surface roughness of workpiece, material tensile strength and elongation, and requirement of grinding method. Larsen's fuzzy production method utilizing the fuzzy production rule can be applied on the establishment of grinding conditions, and also the output value obtained by the center of gravity method can effectively utilize the optimum grinding conditions.