• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.39-42
• /
• 2011

The last years have seen a dramatic increase of the new-building orders for Very Large Ore Carriers(VLOC), mainly driven by the increasing demand for iron ore imports from Australia and brazil to the steel mills in china. Thus the vibrant research of VLOC aimed cost-cutting by optimum compartment have conducted in recent years. In this study, we are also trying to find ways to reduce longitudinal strength by optimum compartment and check additionally whether the modified compartments were satisfied with SOLAS bottom damage.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.59-68
• /
• 2013

Nowadays, optimum structural design techniques based on CSR have been developed and applied to the preliminary design stage focused on minimum weight and minimum construction cost of ship structure. Optimum structural design algorithm developed before could minimize weight and cost on fixed compartment arrangement. However, to develop more efficient design technique, a designer needs to combine optimized compartment arrangement with optimized ship structural design because compartment arrangement has a large effect on structural design according to the change of still water bending moment as a consequence of compartment arrangement change. In this study, automated algorithm for compartment arrangement of an oil tanker is developed to apply preliminary structural design. The usefulness of developed algorithm is verified with Aframax oil tanker constructed by STX shipbuilding Co.Ltd..

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.530-533
• /
• 2008

Refrigerators have some frost related problems in a freezing compartment. The frost formation in the refrigerator gives customers a bad impression concerning quality problems. Therefore, many engineers have been studying the optimum solution to avoid frost formation. But the problem of frost formation is very complex and hard to approach to the answer. The frost generation of a household refrigerator have been widely known that is closely related to the distribution of temperature inside the compartment. The distribution depends on the cold air circulation inside the refrigerator. So frost problem can be reduced and energy consumption efficiency also improved through optimization of air flow fields inside the freezing compartment. In this paper, numerical simulation has been carried out to check fluid flow. The variation of temperature at the walls was measured and quantitative analysis of frost generated from the freezing compartment was carried out. Through comparison between simulation and experiment, some correlation revealed.

• KSBB Journal
• /
• 제13권4호
• /
• pp.369-377
• /
• 1998

To analyze the unique aspects of biomolecular processing for monoclonal antibody (MAb) production and secretion, the simple working model based on 3-compartment (endoplasmic reticulum, Golgi apparatus, and extracellular medium) was developed. Based on in vitro MAb assembly experimental results, the kinetic model for MAb assembly in the endoplasmic reticulumn was proposed. The dynamics of MAb assembly and secretion was simulated using methematica program. According to the simulation results, the proposed 3-compartment model provides an efficient means to predict the specific MAb productivity as well as intracompartmental concentrations of MAb in endoplasmic reticulum, Golgi apparatus, and extracellular compartment model. In vivo profiles of MAb intermediates gave good agreements with the simulation profiles predicted by the intracellular compartment model. Furthermore, results of such analysis can help in directing the control strategy for optimum biomolecular processing in a mammalian cell culture system.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.374-380
• /
• 2007

In this paper a nobel optimum design method is presented for a shield in a vacuum interrupter which is equipped in switchgear to improve its electric insulation capability. The design of Taguchi experiment method which is based on the results by finite element method is used to find optimum design conditions. The important design factors are chosen at first and the concept of signal to noise ratio is applied to evaluate the vacuum interrupter performance, and the optimal values of each parameters are determined. From the results of various analyses, it is shown that the shield plate in circuit circuit breaker compartment of switchgear can reduce the concentration of electric field intensity. This method is very useful to design the construction of a shield in a short time. Consequently, the insulation capability of circuit breaker compartment in a gas insulated switchgear is improved by adopting an additional optimized shaped shield.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.503-513
• /
• 2016

In order to reduce the green-house gas exhaustion, International Maritime Organization (IMO) has been reinforcing carbon gas regulations. Due to the regulations, a lot of competitions for designing Eco ship in the shipbuilding industry are progressing now. It is faced with the necessity of reducing hull weight by combining automated systems for optimal compartment arrangement with hull structural design. Most researches on optimum structural design method have been consistently in progress and applied to minimize weight and cost of mid-ship section in preliminary ship design stage based on analytical structural analysis method on fixed compartment arrangement. In order to reduce design period and to improve international technical competitiveness by shortening the period of hull structural design and enhancing design accuracy, it has been felt necessity to combine optimized compartment arrangement with optimum design of ship structure based on the international regulations and rules. So in this study, the automated design algorithm for longitudinal members has been developed to combine automated algorithm of compartment arrangement with hull structural design system for oil tanker. The SeaTrust-Hullscan software developed by Korean Register is used to perform ship structural design for mother ship and selected design cases. The effect of weight reduction is verified with comparison of ship weight between mother ship and the cases suggested in this study.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.228-228
• /
• 2004

Nuclear Environment Technology Institute (KHNP-NETEC) developed the conceptual design of the low and intermediate-level radioactive waste (LILW) repository. Among many engineering challenges, it is of particular importance to find out an optimum arrangement of near-surface disposal vaults in the repository area to minimize the radionuclide flux and concentration at the interface between the geo-sphere and bio-sphere. (omitted)

• 한국어병학회지
• /
• 제21권2호
• /
• pp.119-127
• /
• 2008

Oxytetracycline (OTC) has been widely used in eel culture as a therapeutic and prophylactic agent because of its broad-spectrum activity against gram-positive and -negative bacteria. The oral treatment dosage of OTC approved for the treatment of edwardsiellosis, furunculosis and vibriosis in eel is 50 mg/kg/day for 3-7 days in Korea. To determine new optimum dose of OTC in eel, the pharmacokinetics of OTC after single oral administration (100 mg/kg B.W., 200 mg/kg B.W.) in cultured eel, Anguilla japonica was examined. In oral dosage of 100 and 200 mg/kg body weight, the highest plasma concentrations of OTC were 1.19±0.42 ㎍/㎖ and 2.69±0.57 ㎍/㎖, respectively. Plasma concentrations of OTC were not detected after 720 h post-dose in all experiments. The kinetic profile of absorption, distribution and elimination of OTC in plasma wwas calculated fitting to a 1- and 2-compartment model by WinNonlin program. The following parameters were obtained for a single dosage of 100 and 200 mg/kg respectively: 1-compartment model, AUC= 82.48 and 432.68 ㎍*h/㎖, Tmax= 3.93 and 14.24 hr, Cmax= 0.94 and 2.34 ㎕/㎖; 2-compartment model, AUC= 448.73 and 530.65 ㎍*h/㎖, Tmax= 6.37 and 8.96 hr, Cmax= 0.90 and 3.21 ㎕/㎖.

• 상하수도학회지
• /
• 제19권3호
• /
• pp.338-347
• /
• 2005

Horizontal-Flow Roughing Filtration (HRF) is one of altemative pretreatment methods e.g. prior to Slow Sand Filtration (SSF). However, some of its limitations are that the effluent quality drops drastically at higher turbidity (>200 NTU) and at higher filtration rate (>1 m/h). To overcome these drawbacks, we suggested Direct Horizontal-Flow Roughing Filtration (DHRF), which is a modified system of Horizontal-Flow Roughing (HRF) by addition of low dose of coagulant prior to filtration. In this study to optimize the DHRF configuration, a conceptual and mathematical model for the coarse compartment has been developed in analogy with multi-plate settlers. Data from simple column settling test can be used in the model to predict the filter performance. Furthermore, the model developed herein has been validated by successive experiments carried out. The conventional column settling test has been found to be an handy and useful to predict the performance of DHRF for different raw water characteristics (e.g. coagulated or uncoagulated water, different presence of organic matter, etc.) and different inital process conditions (e.g. coagulant dose, mixing time and intensity, etc.). An optimum filter design for the coarse compartment (grain size 20mm) has been found to be of 3 m/h filtration rate with filter length of 4-4.5 m.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.44-48
• /
• 2000

Microbial fuel cells comprising the microorganism P. vulgaris, thionin as a mediator, and various mono- and disaccharides in an anodic compartment have been developed. A cathodic compartment containing a Pt electrode and Fe$(CN)_6^{3-}$ was separated from an anode by the Nafion membrane. From absorbance-time measurements, it was found that the absorbance of thionin was not altered by the addition of P. vulgaris, even in the presence of sugars. However, thionin was effectively reduced when P. vulgaris was present. These results differ substantially from the case of safranine O, a phenazine-derivative, indicating that thionin takes up electrons during the metabolic oxidation processes of carbohydrates. Maximum fuel cell efficiency was observed at 37 $^{\circ}C$, optimum temperature for the growth of P. vulgaris, and 0.5 V cell voltage was obtained, which indicates that the metabolism of the microorganism directly affects the efficiency. Thionin concentration was closely related to cell performance. When the charging-discharging characteristics were tested with glucose, galactose, sucrose, maltose, and trehalose as carbon sources, galactose was found to give the highest coulombic efficiency. Cell performance was almost fully recovered with only small degradation when glucose and sucrose were used in the repetitive operation. Current was maintained nearly twice as long for sucrose than in the case of glucose.