• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.264-269
• /
• 1998

The Measurement of concentration patterns for $C_2$, CH and OH radicals in the premixed propane-air flame could be managed through an image processing technique. This technique was applied to the three kinds of flames on a bunsen burner-mixtures of fuel to be lean, optimum and excessive respectively. The image processing system was complished by treating single wavelength flame images around the eac radical luminescence band, which was obtained by using a set of narrow band pass filters, an image intensifier, CCD and PC. It was possible to observe and predict the reaction zone and the concentration distribution of the radicals, Spatial distribution of each radicals in the raaction zone gave us enough informations to analyze the reaction mechanisms in $C_mH_n$ combustion process. According to this informations, the image of $C_2$ radical exists at front zone, following the images of CH and OH radicals at downstream.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1998

The objectives of this study were to investigate the effects of mordants and dyeing method : on the dyeability and color fastness of the fabrics with the extract from Gardenia. The following results were drawn from the data obtained. 1. The wavelengths of the strongest absolution bands of Amur cork tree, Gardenia extract was 440nm respectively and the wavelengths 440-460nm after the mordants were added in the color extracts(The bands of Gardenia extract shifts to short wavelength side as pH increased.). In all cases, the abosorbancies were increased. 2. The main color substances in extract from Gardenia were expected to be cretin respectively by spectrophotometric and HPLC studies. 3. As to the concentration of color extract for dyeing, about 20g/L was the optimum concentration to dye silk and cotton fabrics with extract. 4. For silk and cotton fabrics dyeing with Gardenia extract, $SnCl_2$ was the best mordants. The K/S values of dyed fabrics were increased gradually as the concentration of mordants increased, and the highest K/S values were obtained at 5-10%. When using the mordanting methods, silk fabric by premordanting and cotton fabric by synmordanting had a greater effect K/S value. 5. The color fastness of fabrics dyed with Gardenia extract against dry cleaning, washing, rubbing and perpiration was improved 1 level or so but light fastness was remained 1 level showing without any effect.

• Laser Solutions
• /
• v.15 no.2
• /
• pp.15-20
• /
• 2012

A novel joining technology was developed to compensate the camber in polymers. The preheating laser beam circulates on the joining location and the accumulated heat serves to increase the flexibility of neighboring polymers. The temperature rises up to the glass transient temperature of the polymers and continually loading spring force closes the gap of camber. The irradiated laser was 808nm central wavelength and the power varied between 2Watt and 5Watt. The laps were adjusted between 3 and 10 and the optimum process parameters were 3Watt and 5 laps for the specific application. An FEM analysis was introduced to understand the mechanism of joining by the transient temperature distribution on the polymers. Thermocouples experiments were also tried to correlate the numerical analysis results and it showed the trend of heat accumulation in experiments.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.662-667
• /
• 2012

Poly(ethylene terephthalate) (PET) base films with high light transmittance have been used for the substrate of various functional films in the flat panel display. The effects of the reflective index of coated films, the roughness of the film surface and the content of inorganic silica particles on the light transmittance were studied in this article. Light transmittance was increased by coating a water soluble resin with a low reflective index at an optimum thickness. The roughness of the film did not affect light transmittance when the Ra of the film surface was less than a quarter of the wavelength of incident light. Inorganic silica particles decreased light transmittance due to their absorbance and scattering of the incident light.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.120-127
• /
• 1999

We discussed two main types-conformal and non-conformal (powered) - of holographic combiner. A theoretical model based on the Kogelnik's coupled wave theory was used to illustrate bandwidth and efficiency properties. Also we showed numerical values for the aberrations that are induced by a wavelength shift from construction to reconstruction and found optimum coordinates to reduce the chrolatic aberation of construction beams using aberration balancing techniques. The holographic combiner manufactured in conformal type with 60$^{\circ}$ incidence angle at 514.5 nm had narrow angular bandwidth (FWHM) of 4.1" and spectral bandwidth of 11.4 nm, while non-conformal one with 50$^{\circ}$, 30$^{\circ}$ incidence angle at 514.5 nm showed spectral and angular bandwidth of 10.7 nm and 5.5$^{\circ}$, respectively.vely.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.759-762
• /
• 2001

Mg$_2$SnO$_4$having an inverse spinel structure was selected as a new host material of $Mn^{2+}$ activator. The luminescence of the $Mg_2$SnO$_4$:Mn phosphor prepared by the solid-state reaction were investigated under ultraviolet and low-voltage electron excitation. The Mn-doped magnesium tin oxide exhibited strong green emission with the spectrum centered at 500nm wavelength. It was explained that the green emission in $Mg_2$SnO$_4$:Mn phosphor is due to energy transfer from $^4T_1to ^6A_1\;of\; Mn^{2+}$ ion at tetrahedral site in the spinel structure. The optimum concentration of $Mn^{2+}$/ion exhibiting maximum emission intensity by the low-voltage electron excitation was 0.6mol%. ？

• YAKHAK HOEJI
• /
• v.52 no.6
• /
• pp.426-433
• /
• 2008

The interaction of cadmium (II) ion with protocatechuic acid ($H_3PA$) and ethylenediaminetetraacetic acid (EDTA) were investigated in aqueous solution at different pH. The protocatechuic acid and EDTA/cadmium stochiometries for cadmium (II) binding have been determined by UV-vis spectrophotometric method. The complexation of Cd (II) ion with protocatechuic acid was formed in solution. Among the two potential sites of chelation present in the protocatechuic acid structure, the carboxylic function presents higher complexation power toward Cd (II). 1 : 1 Cd (II)-complex had a maximum absorbance and showed the bathochromic shift of the long-wavelength band of the UV-vis spectra in the alkaline pH when interacted with protocatechuic acid in 0.2 M $NH_3$ - 0.2 M ${NH_4}Cl$ (pH 8.0) buffer. These results suggest that Cd $({H_2}PA)^+$ complex has the optimal condition of chelation in buffer solution at 64.22 ${\mu}M$ protocatechuic acid (A=1.01455).

• YAKHAK HOEJI
• /
• v.37 no.1
• /
• pp.1-8
• /
• 1993

A procedure for the high-performance liquid chromatographic determination of Nebramycin factors in fermentation broth of Streptoalloteichus hindustanus ATCC 31218 mutant was investigated using pre-column derivatization and LTV detection. The method is based on pre-column derivatization of Nebramycin factors with 2,4-dinitrofluorobenzene(DNFB) in the presence of Tris (hydroxymethyl)aminoethane. The chromatographic separation of derivatives of Nebramycin factors and unknown impurities is achieved using reversed-phase column (NOVA-PAK $C_{18}$, Waters Co.) and AcCN : H$_{2}$O : AcOH (53.0:46.5:0.5) as a mobile phase. The mixture of these derivatives were separated within 35 minutes and the optimum wavelength($\lambda_{max}$ ) of the UV detector was 353 nm. The linearity of response for derivatives of Nebramycin factors is demonstrated for concentrations up to 500 $\mu\textrm{g}$/ml and the relative standard deviation is less than 0.79%. Detection limit was 1.67 ng for the 10 $\mu\textrm{l}$ sample volume employed.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.152-156
• /
• 2004

We have studied the effective optical absorption power of Si solar cell with $SiO_2$-antireflection layer based on a mathematical modelling of AM(air mass)1 spectrum and Si refractive index in the wavelength range(0.4 $\mu\textrm{m}\leq$λ$\leq$$0.97\mu\textrm{m}$). The effective optical absorption power obtained from the theoretical calculation was 450 and 520 W/$\m^2$ for the Si solar cells with $SiO_2$-antireflection layer of 500$\AA$ and 1000$\AA$, respectively. The optimum thickness of $SiO_2$-antireflection layer showing the minimum reflection loss was about 1000$\AA$ in the computer simulation. Two kinds of Si solar cells named EBS(500$\AA$) and EBS(l000$\AA$) were fabricated to evaluate the effect of $SiO_2$-antireflection layer thickness on the optical absorption. The epitaxial base Si cell with $SiO_2$-antireflection layer of 1000$\AA$ [EBS(l000$\AA$)] showed the output power improvement of about 15% upon the EBS(500$\AA$) cell due to larger absorption of effective optical power under illumination of AM1, 1 sun.

• KSBB Journal
• /
• v.27 no.1
• /
• pp.33-39
• /
• 2012

In this study three major curcuminoids in turmeric curcumin (1), demethoxycurcumin (2) and bismethoxycurcumin (3) were efficiently extracted by optimizing extraction condition and simultaneously identified using a fast and reliable RP-HPLC-UV-MS and TLC method. The analysis by the $C_{18}$ column was performed and the UV wavelength was fixed at 425 nm. In this result, the total extraction yield of turmeric (Curcuma longa) was increased with extraction time from 1 to 7 h. So, optimum extraction time is 4 h. Also, the highest yield of extraction amount 0.433g 8.66% was obtained by ultrasonic waves with quarter frequency kHz and an extraction time of 7 h. The experiment method was consistent with theoretical Value $r^2$ = 0.987 (1), 0.997 (2) and 0.998 (3). Moreover, LC-MS analysis provided efficiently molecular weight information of three major curcuminoids in turmeric extracts and high purity (~95%) of the curcuminoids were obtained. This work offers would be useful for chemical and biological studies of natural plants and its products.