• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.E
• /
• pp.364-372
• /
• 1993

The purpose of this study is to analyze traffic patterns by use of TRANSYT-7F Model, and to choose the optimum traffic-light cycle length and cycle splite to improve traffic flow and air quality at Samsung Intersection in Seoul. Emission rates of air pollutants are calculated for three time segments 0700-0900, 0900-1800 and 1800-2000. The traffic volume correlated reasonably well with air pollutants emitted ; however, the phasing and timing of traffic signals was found to equally be important. The results of performance with optimal setting indicate that the best cycle length were 80sec(0700-0900), 95sec(0900-1800) and 90sec(1800-2000), res-pectively. As expected the highest emissions of air pollutants were observed during the evening rush hours (1800-2000). A properly designed signalized intersection can help reduce traffic delay, driver discomfort, fuel consumption, and air pollution by efficiently the capacity of existing intersection.

• Journal of Korean Port Research
• /
• v.8 no.2
• /
• pp.1-35
• /
• 1994

The main arterial which runs through the in City of Pusan, carries about 60% of downtown traffic or more, maintains about 20% yearly increase in traffic is severely suffering from the traffic congestion because of concentrated traffic volumes regardless of peak-time periods. The purpose of this study was to grasp the traffic, geometric, and signal conditions of the main arterial through the Videologging System Techniques, perform the transportation system analyses, and finally suggest the improvements which could increase the travel capacity, reduce the average delay and fuel consumption with the optimal conditions of signal system. The following conclusions were drawn : firstly the traffic system should be shifted for the travel distribution on the arterial during the peak time periods, secondly the roadway system of the arterial reviewed for left-turn traffic during the peak time periods, and thirdly the signal system of intersection reconstructed for signal optimization or progression within the range of cycle length suggested.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.31-40
• /
• 2000

A robust scheme of locating and counting the number of vehicles m urban traffic scenes, a core component of vision-based traffic monitoring systems, is presented The method is based on the evidential reasoning, where vehicle evidences m the background subtraction Image are obtained by a new locally optimum thresholding, and the evidences are merged by three heuristic rules using the geometric constraints The locally optimum thresholding guarantees the separation of bright and dark evidences of vehicles even when the vehicles are overlapped or when the vehicles have similar color to the background Experimental results on diverse traffic scenes show that the detection performance is very robust to the operating conditions such as the camera location and the weather The method may be applied even when vehicle movement is not observed since a static Image IS processed without the use of frame difference.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.115-130
• /
• 2005

This paper presents the effects of indirect costs on Life-Cycle-Cost(LCC) effective optimum design of steel-box girder bridges. The LCC formulations considered in the LCC optimization of the bridges consist of initial cost and expected rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, and indirect costs such as road user costs and indirect socio-economic losses. To demonstrate the LCC-effectiveness for optimum design of the bridges, an actual steel box girder bridge having two continuous spans(2@50m=100m) is considered as a numerical example. And also, in this paper, various sensitivity analyses are performed to investigate the effects of indirect costs caused by traffic conditions such as number of detour route, number of lane on detour route, length of detour route, and traffic volumes on the LCC-effective optimum design. From the numerical investigations, it may be concluded that indirect costs caused by traffic network may sensitively influence on the LCC-effective optimum design of steel-box girder bridges. Therefore, it may be stated that the traffic conditions should be considered as one of the important items in the LCC-effective optimum design of the bridges.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.55-61
• /
• 2001

In this paper, a synchronous reverse link DS-CDMA system with cdma2000 standard is simulated to analyze performance of system and to find the optimum power ratio between pilot channel and traffic channel. In the cdma2000 the pilot channel is used to estimate fading channel, in contract to IS-95 and it compensates phase variation of received signal due to channel environment. When the length of channel estimation is 31pcg symbols, we can find the optimum power ratio of pilot channel to traffic channel. And also we find Eb/No satisfying target FER when the power control is applied and analyze performance of system with multiuser transmission.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.47-57
• /
• 2018

PURPOSES : The permeable pavement type has been rapidly developed for solving problems regarding traffic noise in the area of housing complex and heavy rainwater drainage in order to account for the climate change. In this regards, the objective of this study is to figure out the characteristics of pavement types. METHODS : The laboratory test for deriving optimum asphalt content (OAC) was conducted using the mixtures of the permeable asphalt surface for the pavement surface from Marshall compaction method. Based on its results, the pavement construction at the test field was conducted. After that, the site performance tests for measuring the traffic noise, strength and permeability were carried out for the relative evaluation in 2 months after the traffic opening. The specific site tests are noble close proximity method (NCPX), Light falling deflectometer test (LFWD) and the compact permeability test. RESULTS : The ordered highest values of the traffic noise level can be found such as normal dense graded asphalt, drainage and porous structure types. In the results from LFWD, the strength values of the porous and drainage asphalt types had been lower, but the strength of normal asphalt structure had relatively stayed high. CONCLUSIONS :The porous structure has been shown to perform significantly better in permeability and noise reduction than others. In addition to this study, the evaluation of the properties and the determination of the optimum thickness for the subgrade course under the porous pavement will be conducted using ground investigation technique in the further research.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.3
• /
• pp.273-278
• /
• 1995

This study is to estimate the ventilation volume by the traffic that originated from driving automobiles for two tunnels (Kugi tunnel and Kumhwa tunnel) that adopted natural ventilation system among tunnels of Seoul, and on the basis of which, we estimated the ventilation velume at various conditions. With the result of the estimation, we will present the basic method that can be operated with the optimum condition for the ventilation system. Estimating the predicted ventilation volume in the tennel by the pollutant concentration, we used traffic volume and CO emission data by the automobile speed and CO concentration in the tunnel. And, when we estimated the traffic ventilation volume by natural and traffic ventilation force, we used traffic volume, automobile speed, tunnel area, automobile area data and so on. As the result of simple regression between predicted ventilation volume and traffic ventilation volume, we attained the regression coefficient 0.88, and achieved the relation form that predicted ventilation volume equal 0.12x traffic ventilation volume-92, 000. Using this equation, we estimated the ventilation volume to satisfy the enviromnental standards of several space, and calculated the required volume for mechanical ventilation. Incase of Kumhwa Tunnel, there is a need of mechanical ventilation all day long to satisfy air quality standard 9 ppm for 8 hours average and 10 ppm for the indoor air quality standard of public facilities.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.410-416
• /
• 2009

In recent years, the rollover accident of large class of vehicles has become important safety issue. Even though the rollover form a small percentage of all traffic accidents, they have a fatal effect upon the driver and passenger. Among the traffic accidents occurred in driving, the rollover is the major cause of traffic fatalities. Therefore, it is required to develop the analytical and experimental techniques for predicting rollover propensity of vehicles and also to improve the vehicle suspension design in the viewpoint of rollover resistance. In this study, the parameter sensitivities for the roll angle of SUV suspension are analyzed, and then the determined design parameters are optimized by using the regression model function of the response surface methods. The analysis results show that the roll angle of the optimized vehicle is decreased as compared with the initial vehicle and also the rollover possibility is decreased when the roll rate of the front suspension is larger than the roll rate of the rear suspension.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.191-192
• /
• 2005

This project is to establish an annex clinic center under 5 floors with gross floor area of 3,000 Pyeong behind existing Chosun university Hospital main building with 600 beds. The goal of the design is connecting the new clinic center with the existing main building and completing a combined hospital that has synergy effects. Given the old condition of the hospital and characteristics of the ground, I tried to embody the image of Medical Pulse, which is very alive with strong pulse, and suggest vision of 21st century hospital. First, one main entrance as a combined hospital. For optimum access and functions, I used the entrance of existing building as the only main entrance of new combined hospital, rearrange the road in front of the main building and improve traffic system, and upgrade the image and function of combined main entrance by planning new atrium united robby that makes link to the main building easier. Second, section planning considering the optimum functions and convenience. I established 4 floors linking functionally with the existing building, minimized vertical traffic line, and enhanced convenience through barrier free environment, which is a horizontal traffic line without barriers, crucial to hospital. Third, combined zoning generating synergy effects. I linked sterilizing room with logistics center by operating room and service bridge, and arranged central treatment department horizontally, Also, by horizontally arranging cancer center and department of nuclear medicine close with PET and cyclotron center, I established identity of specialized departments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.60-75
• /
• 2019

Nowadays, interest in safety of pedestrians who are relatively weak when compared with vehicles increases. Also, concern for pedestrian accidents on crosswalks increases. For these reasons, scrambled crosswalks which are considered to contribute pedestrian safety by reducing conflicts between vehicles and pedestrians are actively discussed and there are also a few intersections where they are actually installed. However, scrambled crosswalks must include all-red phase for all vehicle traffic flows, which inevitably leads to increase of lost time per cycle. Therefore, evaluation in terms of efficiency should be done before installation of scrambled crosswalks. This research suggests installation criteria for scrambled crosswalks so that it is possible to judge whether installation of scrambled crosswalks is appropriate only by surveying vehicle traffic volume and pedestrian traffic volume. This research derives optimum cycle length from signal optimization models which considers both vehicle traffic volume and pedestrian traffic volume. From this optimum cycle length, this research compares total delay time before and after installation of scrambled crosswalks. From an analysis, two research results are derived. Firstly, there is critical traffic volume above which installation of scrambled crosswalks can not efficient. Secondly, appropriate areas for installation of scrambled crosswalks are different by each signal intersection or by each signal system and those difference vary. From these results, this research suggests installation criteria for scrambled crosswalks which consists of two steps. The delay time of the pedestrians may be increased after the diagonal crosswalk is installed, but it may be desirable to install in consideration of the appropriate traffic level to ensure safety.