• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.93-98
• /
• 1983

The sensitivity characteristics of $SnO_2$-based gas sensor prepared by sintering method have been studied at the presence of CO and Propane gas. Samples mixed with 1wt% $La_2O_3$ and 1wt% $PdCl_2$ showed highest sensitivity to CO and propane gas at 250$^{\circ}$C but the addition of $CeO_2$ did not enhance the sensitivity. For slectivity for gas a $SnO_2-La_2O_3$ (1wt%) sample without $PdCl_2$ showed better results. A sample sintered sintered at 115$0^{\circ}C$ has shown the optimum condition in sensitivity and electroding

• Journal of Sensor Science and Technology
• /
• v.22 no.5
• /
• pp.357-363
• /
• 2013

An ultraviolet pulsed laser ablation of polyimide film coated with platinum has been used to enhance the sensitivity for the application as an electrochemical biosensor. Densely packed cones are formed on polyimide surface after UV irradiation which results in increase of surface area. In order to apply the sensitivity improvement of laser ablated polyimide film electrodes, the glucose oxidase modified biosensor was fabricated by using an encapsulation in the gel matrix through sol-gel transition of tetraethoxysliane on the surface of laser ablated polyimide film. The optimum conditions for glucose determination have been characterized with respect to the applied potential and pH. The linear range and detection limit of glucose detection were from 2.0 mM to 18.0 mM and 0.18 mM, respectively. The sensitivity of glucose biosensors fabricated with laser ablated polyimide film is about three times higher than that of plain polyimide film due to increase in surface area by laser ablation.

• Journal of Magnetics
• /
• v.18 no.1
• /
• pp.74-79
• /
• 2013

This paper proposes a sampling-based optimization method for electromagnetic design problems, where design sensitivities are obtained from the elaborate surrogate models based on the universal Kriging method and a local window concept. After inserting additional sequential samples to satisfy the certain convergence criterion, the elaborate surrogate model for each true performance function is generated within a relatively small area, called a hyper-cubic local window, with the center of a nominal design. From Jacobian matrices of the local models, the accurate design sensitivity values at the design point of interest are extracted, and so they make it possible to use deterministic search algorithms for fast search of an optimum in design space. The proposed method is applied to a mathematical problem and a loudspeaker design with constraint functions and is compared with the sensitivity-based optimization adopting the finite difference method.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.120-128
• /
• 1997

In this paper, A design strategy of the Surface Mounting Device for accurate and better performance is studied. Analytical modeling, sensitivity analysis, and optimization are being conducted. The ANSYS software and experimental method are used for the verification of the analytical equations with boundary conditions. Through the sensitivity analysis, the most dominant design parameter can be detected. The optimum design parameters for improving the given performances are selected by using the optimiza- tion algorithm. The design tool based on the design strategy for the analysis, modeling, and optimization will be useful for are-design and better improving of the SMD.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.38-45
• /
• 1994

The general conceptual constitution of structural optimization is formulated. The algorithm using the gradient projection method and design sensitivity analysis is discussed. Examples of minimum-weight design for six-story steel plane frame are taken to illustrate the application of this algorithm. The advantages of this algorithm such as marginal cost and design sensitivity analysis as well as system analysis are explained.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.13 no.1
• /
• pp.1-9
• /
• 1988

The purpose of this paper is study the sensitivity analysis of matrix game. Teh sensitivity analysis of matrix is classified into two types. Type one is to find the characteristic region of an element of the pay off matrix in which the value of the current optimal strategy remains as an optimum. Type two is to find that in which the basis of the current optimal strategy does not change. This paper shows the characteristic regions of basic and nonbasic strategies. Further it is found that the characteristic regions of type one and two are same in the case that the element is that of at least one player's nonbasic strategy.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.344-347
• /
• 2006

This paper proposes an optimum tuning which improves the tuning effect of IMC-PID and guarantees the performance and robustness of controller system by considering gain margin, phase margin, sensitivity functions and integral square error(ISE) for IMC-PID controller.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.181-183
• /
• 1997

In this paper the analysis and optimum design of ceramic insulator is studied. The finite element method (FEM) is used for the electromagnetic solution and the design sensitivity analysis is used for the optimization. The parameterization of design variables and movable points is introduced and the linear function is used as a interpolation function.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.62-68
• /
• 2000

Optimization technique to find a path of an inner reinforcement of an automobile hood is proposed by using design sensitivity informations. The strength and modal characteristics of the automobile hood are analyzed and their design sensitivity analyses with respect to the thickness are carried out using MSC/NASTRAN. Based on the design sensitivity analysis, determination of design variables and response functions is discussed. Techniques improving design from design sensitivity informations are suggested and the double-layer method is newly proposed to optimize the path of stiffener for a shell structure, Using the suggested method, we redesign a new inner reinforcement of an automobile hood and compare the responses with the original design. It is confirmed that new design improved in the frequency responses without the weight increasement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.182-191
• /
• 2001

The paper describes the improvement on concurrent subspace optimization(CSSO) via automatic differentiation. CSSO is an efficient strategy to coupled multidisciplinary design optimization(MDO), wherein the original design problem is non-hierarchically decomposed into a set of smaller, more tractable subspaces. Key elements in CSSO are consisted of global sensitivity equation, subspace optimization, optimum sensitivity analysis, and coordination optimization problem that require frequent use of 1st order derivatives to obtain design sensitivity information. The current version of CSSO adopts automatic differentiation scheme to provide a robust sensitivity solution. Automatic differentiation has numerical effectiveness over finite difference schemes tat require the perturbed finite step size in design variable. ADIFOR(Automatic Differentiation In FORtran) is employed to evaluate sensitivities in the present work. The use of exact function derivatives facilitates to enhance the numerical accuracy during the iterative design process. The paper discusses how much the automatic differentiation based approach contributes design performance, compared with traditional all-in-one(non-decomposed) and finite difference based approaches.