• 한국수산과학회지
• /
• 제17권3호
• /
• pp.197-205
• /
• 1984

열대산 메기 Clarias batrachus를 새로운 양식어종으로 만들기 위한 기초연구의 하나로 이 종의 성장적수온 및 월동을 위한 성장가능최저수온과 저수온에서의 사치가 시작되는 수온을 찾기 위해 1981년3월부터 1982년 3월까지 체중 $12{\sim}40g$사이의 1년생으로서 $14^{\circ}C$에서 $34^{\circ}C$사이의 수온에서 일련의 실험을 실시하여 다음의 결과를 얻었다. 이 종의 약 12g에서 28g사이의 것의 성장적정수온은 약 $25^{\circ}C$로 나타났고 이 수온에서는 이보다 높거나 낮은 수온에서보다 성장과 사료섭취량, 그리고 사료효율면에서 가장 좋은 결과가 나왔다. 성장최저한계수온은 $18^{\circ}C$로 나타났으며 62일간의 실험에서 1일성장률은 약 $0.1\%$로 낮았으나 폐사는 없었고 활동도 비교적 활발하였다. 따라서 이 종의 월동가능최저수온은 $18^{\circ}C$로 사료된다. $16^{\circ}C$또는 이보다 약간 낮은 수온에서 방치하면 약 30일내에 대부분 폐사하며 $14^{\circ}C$이하에서는 $1{\sim}7$일 내에 모두 폐사하였다. 따라서 이 종에 있어서 폐사가 시작되는 수온은 $16^{\circ}C$로 사료된다. 성장가능최저수온 근처에서 장기간사육할 경우 급작스런 수온하강, 특히 $15^{\circ}C$이하로 내려가는 경우 전체 어류에 치명적인 피해가 예상되므로 주의하지 않으면 안될 것으로 사료된다.

• 한국식품과학회지
• /
• 제20권3호
• /
• pp.303-309
• /
• 1988

Extruder 조작조건에 따른 extruder 내부물질의 온도변화는 제품의 물리화학적인 특성에 큰 영향을 미치는 요소이다. 자가발열형 single screw extruder를 사용하여 원료의 종류, 입자크기 수분함량과 같은 사입원료 조건과 사출구의 형태, breaker의 형태등과 같은 extruder의 구조적인 요소 및 냉각방법과 스크류 회전속도와 같은 작동조건을 달리했을 때의 작동초기 단계에서 열발생 속도와 평형상태에서 내부온도 분포를 관찰하였다. 쌀가루, 보리가루, 밀가루, 탈지대두분을 원료로 하여 각각 압출성형했을 때 바렐내부 발열상태를 보면 탈지대두분이 가장 급격한 온도증가를 나타내었으며 쌀가루가 가장 낮게 나타났다. 수분함량이 감소함에 따라 각 부위 온도 및 동력요구량은 증가했고, 입자크기가 작을 수록 표면적이 증가하여 압축부위 온도가 높았다. 스크류 회전속도가 증가함에 따라 각 부위의 온도가 높아졌다. 또한 바렐내부 온도분포가 계량부위>사출구부위>압축 부위 순서로 이루어질 때 extruder 작동상태가 가장 양호하였다.

• 한국수산과학회지
• /
• 제42권1호
• /
• pp.26-33
• /
• 2009

This experiment was conducted to examine the utilization of added dietary selenium (Se) as an immune stimulant in juvenile olive flounder, Paralichthys olivaceus. Fish averaging $4.0{\pm}0.1\;g$ ($mean{\pm}SD$) were fed one of seven semi-purified diets containing 0.56, 1.07, 2.86, 4.56, 43.15, 90.71, or 161.74 mg of Se/kg ($Se_{0.56}$, $Se_{1.07}$, $Se_{2.86}$, $Se_{4.56}$, $Se_{43.2}$, $Se_{90.7}$ and $Se_{161.7}$, respectively) for 12 weeks, respectively. At the end of the feeding trial, the fish fed diets containing more than 43.2 mg of Se/kg showed above 90% mortality. There were no significant differences in weight gain, feed efficiency, specific growth rate, protein efficiency ratio, or hematological characteristics among the fish fed the $Se_{0.56}$, $Se_{l.07}$, $Se_{2.86}$, and $Se_{4.56}$ diets. Se concentrations of the gill, kidney, muscle and liver tissues occurred in dose-dependent manners. Alternative complement pathway activation and the chemiluminescene responses of the fish fed the $Se_{1.07}$ diet were significantly higher than those of the fish fed the other diets (P<0.05). These results indicate that the optimum dietary supplementation level of Selenium as selenoyeast could be 1.07 mg of Se/kg based on the non-specific immune responses of juvenile oilve flounder, Paralichthys olivaceus.

• Journal of Biosystems Engineering
• /
• 제5권2호
• /
• pp.1-14
• /
• 1980

This study was carried out to investigate the effects of the counter-pressure setting and the roller speed of a rice whitening machine on the head rice recovery. milling capacity and milling efficiency, and also to find out the optimum operational conditions of the machine. The radial pressure inside the whitening chamber and the outlet axial pressure were measured to study their relationships with the head rice recovery, milling capacity and milling efficiency. The results of the study are summarized as follows. (1) The most important factor in rice whitening was the counter-pressure setting. It significantly affected the head rice recovery. (2) The roller speed significant affected the milling capacity and milling efficiency , but it did not affected the head rice recovery. (3) Both the radial pressure and the outlet axial pressure were affected by the counter-pressure setting but not by the roller speed. Both of them increased almost linearly with the counter-pressure setting. There was a significant correlation between the radial pressure and the outlet axial pressure. (4) The flow rate through the whitening chamber when the feed gate was fully opened increased with the roller speed, but it was not affected by the counter-pressure setting. (5) The head rice recovery decreased as the counter-pressure setting increased , but it was not affected by the roller speed. The reason could be explained by the fact that the radical pressure increased only with the counter-pressure setting. (6) The milling capacity increased with the counter-pressure setting and linearly with the roller speed. The milling efficiency generally increased with both the counter-pressure setting and the roller speed. However, the effect of roller speed was negligible at the higher counter-pressure setting. The temperature rise inside the whitening chamber was moderate with the mean of 11.3℃ (range 5.6-18.3℃) even though it increased slightly with the roller speed. Considering the head rice recovery and milling efficiency, the optimum operational conditions of the machine appeared to be the counter-pressure setting of 67g/㎠ and the roller speed of 1,050rpm. Neglecting the small difference in the head rice recovery , the greater milling capacity could be obtained at the counter-pressure setting of 85g/㎠ with the roller speed of 850-1050rpm.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 추계정기총회 및 제26회 학술발표대회 고분자리싸이클링기술 특별심포지엄
• /
• pp.75-82
• /
• 2005

바이오매스 열분해는 에너지와 가치있는 화학물질의 원료를 얻을 수 있는 유망한 방법 중의 하나이다. 열분해 반응기의 최적운전조건을 결정하기 위하여 기포유동층 반응기에서 상수리나무와 낙엽송의 열분해를 수행하였다. 온도, Uo/Umf, L/D가 생성물의 수율과 조성에 미치는 영향을 관찰하기 위하여 상수리나무와 낙엽송 톱밥으로 유동층 급속열분해를 수행하였다. 반응온도, Uo/Umf, L/D, 원료주입량의 효과를 결정하였고, 최적조건은 다음과 같다 : $T\;=\;400^{\circ}C,\;U_o/U_{mf}\;=\;3.0,\;L/D\;=\;2.0$. 바이오오일의 최대 수율은 약 55%이었고, 주요 조성은 carbohydrate류, guaiacol류, furan류, phenol류, syringol류 화합물이었다. 생성가스는 CO, $CO_2$, 저분자 탄화수소이었고, 조성을 이용하여 측정한 가스수율은 계산치와 일치하였다.

• Journal of Biosystems Engineering
• /
• 제13권2호
• /
• pp.38-45
• /
• 1988

This study was intended to develop the system automatically controlling travel direction of combine by means of sensing paddy rows. The control system was composed of three detecting levers having different length, micro-switch, microcomputer and electro-hydraulic control system. Sensor and control system developed was tested to estimate optimum design values and its actual performance as installed in combine. The computer simulation and performance test at simulated and actual field were conducted to test for possibility of practical use. The results of the study arc summarized. as follows: 1. The travel traces of combine hiving the conventional sensor with 2 levers and the new sensor detecting the slope of paddy rows were compared through computer simulation. Turning frequency of combine having new sensor was fewer than that of conventional sensor, but the rate of turning for the combine with new sensor was much greater than that of conventional sensor. 2. As sensor was established behind the tip of divider, the sensor itself well followed paddy rows but the tip of divider did not, resulting in divider being deviated from paddy rows. It was analyzed that the sensor should be attached closer to the tip of divider to have a better performance of the control system. 3. The greater the length of sensor lever for given location of sensor attachment and combine forward speed, the higher sensitivity of turning in control system. Moreover, increasing combine speed resulted in a worse performance of control system following paddy rows. Consequently, it was necessary that an optimum length of sensor attachment and for the range of combine operational speed. 4. Field test of combine installed with the sensor and electro-hydraulic system developed in this study showed that it may be operated smoothly and well behaved to paddy rows to 4th gear of combine speed which was 59cm/s. Consequently. it was concluded that the combine with the guidance control system developed in this study may be successfully used for paddy combining.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.644-651
• /
• 1997

In the water purification plant, chemicals are injected for quick purification of raw water. It is clear that the amount of chemicals intrinsically depends on water quality such as turbidity, temperature, pH and alkalinity. However, the process of chemical reaction to improve water quality (e.g., turbidity) by chemicals is not yet fully clarified nor quantified. The feedback signal in the process of coagulant dosage, which should be measured (through the sensor of the plant) to compute the appropriate amount of chemicals, is also not available. Most traditional methods focus on judging the conditions of purifying reaction and determine the amounts of chemicals through manual operation of field experts using Jar-test data. In this paper, a systematic control strategy is proposed to derive the optimum dosage of coagulant, PAC(Polymerized Aluminium Chloride), using Jar-test results. A neural network model is developed for coagulant dosing and purifying process by means of six input variables (turbidity, temperature, pH, alkalinity of raw water, PAC feed rate, turbidity in flocculation) and one output variable, while considering the relationships to the reaction of coagulation and flocculation. The model is utilized to derive the optimum coagulant dosage (in the sense of minimizing turbidity of water in flocculator). The ability of the proposed control scheme validated through the field test has proved to be of considerable practical value.

• 한국축산시설환경학회지
• /
• 제16권1호
• /
• pp.61-80
• /
• 2010

Poultry welfare has recently appeared as worldwide concern as well as Korea. The recent action plan for farm animal welfare introduced by the European Commission intends to expand the body of regulatory standards. In this context, many countries and/or organization are on the verge of establishing the most optimum poultry welfare standards. To establish the most optimum standards, comparative analysis of feeding regimen before and after welfare-bestowed environment need to be preceded. Most guidelines or standards for poultry welfare do not suggest the nutritional requirements and feeding system in detail, although it is deterimental especially for the farmer. This review intends to find scientific base to establish detailed welfare feeding guidelines. However, only limited research has been conducted in the view of actual poultry welfare. The results indicated the incidence of SDS, ascites, skeletal dysfunctions caused by fast growth rate in broiler, feather pecking and cannibalism in laying hen, and feed restriction in broiler breeder could be reduced by changing nutritional regimen and feeding strategies or both. The regimen and feeding strategies are certainly near to the direction that the poultry welfare ought to be in the right track. In this article, feeding and drinking guidelines in many standards as well as welfare feeding experiments have been reviewed and compared In the view of chicken productivity, welfare physiology and poultry health.

• Advances in nano research
• /
• 제10권1호
• /
• pp.59-69
• /
• 2021

Electrospinning is a cost-effective and versatile method for producing submicron fibers. Although this method is relatively simple, at the theoretical level the interactions between process parameters and their influence on the fiber morphology are not yet fully understood. In this paper, the aim was finding optimal electrospinning parameters in order to obtain the smallest fiber diameter by using Taguchi's methodology. The nanofibers produced by electrospinning a solution of Thermoplastic Polyurethane (TPU) in Dimethylformamide (DMF). Polymer concentration and process parameters were considered as the effective factors. Taguchi's L9 orthogonal design (4 parameters, 3 levels) was applied to the experiential design. Optimal electrospinning conditions were determined using the signal-to-noise (S/N) ratio with Minitab 17 software. The morphology of the nanofibers was studied by a Scanning Electron Microscope (SEM). Thereafter, a tensile tester machine was used to assess mechanical properties of nanofibrous scaffolds. The analysis of DoE experiments showed that TPU concentration was the most significant parameter. An optimum combination to reach smallest diameters was yielded at 12 wt% polymer concentration, 16 kV of the supply voltage, 0.1 ml/h feed rate and 15 cm tip-to-distance. An empirical model was extracted and verified using confirmation test. The average diameter of nanofibers at the optimum conditions was in the range of 242.10 to 257.92 nm at a confidence level 95% which was in close agreement with the predicted value by the Taguchi technique. Also, the mechanical properties increased with decreasing fibers diameter. This study demonstrated Taguchi method was successfully applied to the optimization of electrospinning conditions for TPU nanofibers and the presented scaffold can mimic the structure of Extracellular Matrix (ECM).

• KSBB Journal
• /
• 제15권3호
• /
• pp.274-279
• /
• 2000

한지자숙폐액을 사료첨가효모의 생산기질로 재이용할 수 있는 가를 검토하기 위하여 사료첨가효모제품으로부터 분리한 Sacch­a aromyces CereVlSlae종을 한지자숙폐액에 배양하였다. 자숙폐액원액에서는 균이 증식하지 못하였으나, 희석액에서는 증식하였으 며, 증류수로 7.5배 희석시 최대증식을 보였다. Jar fennenter배양 에서의 최대총균수는 $1.34{\times}107/mL$이었으며, 최대생균수는 $1.1{\times}107/mL$이었다. 배양액의 균체농도를 증가시키기 위하여 배양중 에 자숙폐액원액을 침가하여 총균수를 최대 $8.2{\times}107/mL$까지 증 가시킬 수 있었다. 지숙폐액원액과 함께 $(NH_4)_2S0_4 및 KH_2P0_4$ 까지 첨가함으로써 최대균체농도에 도달하는 시간을 단축시킬 수 있었다.