• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.363-366
• /
• 2003

We propose the system that automatically adjusts the white balance on display products to a standard value according to several nations. We replace manual or semi-auto method with fully automatic method using windows application program. And we use RS-232C serial interface to communicate PC with display products which we want to adjust white balance. The PC generates patterns for measuring color information and Color Analyzer measures color and brightness. This value is transmitted through RS-232C serial interface to PC. The PC's algorithm analyzes this information and then decides which RGB Gain value is best for optimal white balance. This RGB Gain value is transmitted through RS-232C serial interface to display products. The modified color value is measured again and feed back to PC. This sequence is repeated until optimum white balance is obtained.

• Journal of computational fluids engineering
• /
• v.1 no.1
• /
• pp.134-141
• /
• 1996

Wall interference is one of the major obstacles to increase the model size and data accuracy. There have been many treatments for wall interference including interference correction and adaptive wall test section. Recently, two-flexible-walled adaptive wall test section is concluded adequate for three-dimensional test. But proper location of target line and pressure holes are critical to its success. In this study, a new adaptive algorithm which dispenses target line and dependency of pressure hole distribution is suggested. The wind tunnel and free air tests are simulated by the numerical computation of Euler equations. The optimum wall shape is achieved by two variable optimization which is composed of two base streamlines. The wall interference is reduced well in the optimized result which is not sensitive to the base streamlines.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.403-410
• /
• 2005

This study presents the benchmark results of several design frameworks for the purpose of developing an efficient design framework in view of Excel interface. For the benchmark, three optimum design problems are chosen and solved by using the design frameworks. In order to compare the frameworks with each other, the evaluation criteria are specified and modified to fit the problems with Excel interface. Three example cases are solved and compared. The evaluation report is summarized in terms of efficiency, ease of use, internal structure, API, etc. However, the optimization result itself is not focused because the specific optimization algorithm is not our concern. Finally, some suggestions of how to develop an efficient design framework with Excel interface are presented.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1159-1164
• /
• 2004

There is an Overhead Hoist Transport(OHT) for delivering the wafer in semiconductor processing. The transfer system is consists of carrier vehicle. rail, and support. OHTCMS(OHT Control and Management System) has to take the feature, such as the optimal control and integration with several OHT. In this paper, ESRA(Efficiency of Shortest - Route Algorithms) is proposed which can be transported optimal route and be prevented collision using the Floyd-Warshall algorithms. The proposed algorithm is verified through consecutive simulation for a long time.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.378-383
• /
• 2001

In order to improve automobile maneuverability and tire durability, it is very important for one to determine a suitable sidewall contour producing the ideal tension and strain-energy distributions. In order to determine such a sidewall contour, one must apply multi-objective optimization technique. The optimization problem of tire carcass contour involves several objective functions. Hence, we execute the tire contour optimization for improving the maneuverability and the tire durability using satisficing trade-off method. And, the tire optimization also requires long cup time for the sensitivity analysis. In order to resolve this numerical difficulty, we apply neural network algorithm.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1485-1490
• /
• 2003

This paper is the analysis of thermal and fluid in solar concentration absorber with various tilt angle and opening ratio of absorber entrance. The purpose of this study is to develop optimum solar concentration absorber, and the parameters for the study are the opening ratio of absorber entrance and the tilt angle. The aspect ratio of absorber was fixed at 0.64, and opening ratio was changed from 0.1 to 1.0. The finite volume method with SIMPLE computational algorithm are used and analyzed the heat transfer in absorber inside walls.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.90-93
• /
• 2000

This paper presents job scheduling for non-identical parallel machines using Simulated Annealing (SA). The scheduling problem accounts for allotting work parts of L lots into M parallel machines, where each lot is composed of N homogeneous jobs. Some lots may have different jobs while every job within each lot has common due date. Each machine has its own performance and set up time according to the features of the machine, and also by job types. A meta-heuristic, SA, is applied in this study to determine the job sequences of the scheduling problem so as to minimize total tardiness of due. The SA method is compared with a conventional steepest descent(SD) algorithm that is a typical tool for finding local optimum. The comparison shows the SA is much better than the SD in terms tardiness while SA takes longer , but acceptable time.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.121-124
• /
• 1999

본 논문에서는 선형배열을 이용하여 음향을 측정하기 위한 새로운 빔형성 알고리듬을 제안한다. 제안 알고리듬은, FIR필터 설계기법에 의해 가중상수 및 원하는 빔패턴을 설정하고 이를 초기치로 사용하여 원하는 빔패턴과의 오차가 최소가 되도록 가중상수를 최적화시킨다. 주파수영역의 지향지수 균일성 유지를 위해 옥타브대역을 부대역으로 세분하고 의사역행렬에 의해 전달행렬을 정방행렬화하여 부대역별로 최적화를 수행한다.

• International Journal of CAD/CAM
• /
• v.12 no.1
• /
• pp.9-19
• /
• 2012

Generation of optimum planar B-spline curve in terms of minimum deviation and required fairness to approximate a target shape defined by a strip-shaped unorganized 2D point cloud is studied. It is proposed to use the location of control points as variables within the geometric optimization framework of point distance minimization. An adaptive simulated annealing heuristic optimization algorithm is developed to iteratively update an initial approximate curve towards the target shape. The new implementation comprises an adaptive cooling procedure in which the temperature change is adaptively dependent on the objective function evolution. It is shown that the proposed method results in an improved convergence speed when compared to the standard simulated annealing method. A couple of examples are included to show the applicability of the proposed method in the surface model reconstruction directly from point cloud data.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.16-22
• /
• 2013

This paper presents the analysis and optimization of air-core permanent magnet linear synchronous motor with overlapping concentrated windings to achieve high thrust density, high thrust per copper losses and low thrust ripple. For the motor design, we adopt equivalent magnetizing current (EMC) method to analyze the magnetic field and give analytical formulae for calculation of motor parameters such as no-load back EMF, dynamic force, thrust density and thrust per copper losses. Further, we proposed a multi-objective optimization by genetic algorithm to search for the optimum parameters. The design optimization is verified by 2-D Finite Element analysis (FEA).