• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.153-161
• /
• 2018

This paper describes the performance improvement of Software (SW) digital filter using GPU (Graphical Processing Unit). The previous developed SW digital filter has a problem that it operates on a CPU (Central Processing Unit) basis and has a slow speed. The GPU was introduced to filter the data of the EAVN (East Asian VLBI Network) observation to improve the operation speed and to process data with other stations through filtering, respectively. In order to enhance the computational speed of the SW digital filter, NVIDIA Titan V GPU board with built-in Tensor Core is used. The processing speed of about 0.78 (1Gbps, 16MHz BW, 16-IF) and 1.1 (2Gbps, 32MHz BW, 16-IF) times for the observing time was achieved by filtering the 95 second observation data of 2 Gbps (512 MHz BW, 1-IF), respectively. In addition, 2Gbps data is digitally filtered for the 1 and 2Gbps simultaneously observed with KVN (Korean VLBI Network), and compared with the 1Gbps, we obtained similar values such as cross power spectrum, phase, and SNR (Signal to Noise Ratio). As a result, the effectiveness of developed SW digital filter using GPU in this research was confirmed for utilizing the data processing and analysis. In the future, it is expected that the observation data will be able to be filtered in real time when the distributed processing optimization of source code for using multiple GPU boards.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.47-54
• /
• 2019

In this study, the wastes were used as fuels for direct reduction iron (DRI) production to reduce production cost and recycle the wastes. We examined the effects of wastes on the reduction behavior of DRI manufacture and the possibility of using wastes as auxiliary fuels. The proximate and Ultimate analysis were carried out to confirm the properties of wastes as fuels, and high-quality reduced irons were fabricated by using the waste as an auxiliary fuel. The metallization of reduced irons increased as the calorific value increase of auxiliary fuel. Especially, the reduced irons fabricated from the waste tires and vinyl plastics which had high heat energy and volatile matters showed higher metallization than the others. The high calorific value and volatility of waste were significant properties as fuel. The high quality DRI could be fabricated with wastes as auxiliary fuels through optimization of reaction conditions.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.30-36
• /
• 2019

Traditional cell culture(2-dimensional) is the method that provide a nutrient and environment on a flat surface to cultivate cells into a single layer. Since the cell characteristics of 2D culture method is different from the characteristics of the cells cultured in the body, attempts to cultivate the cells in an environment similar to the body environment are actively proceeding in the industry, academy, and research institutes. In this study, we will develop a technology to fabricate micro-structures capable of culturing cells on surfaces with various curvatures, surface shapes, and characteristics. In order to fabricate the hemispheric plastic structure(thickness $50{\mu}m$), plastic preform mold (hereinafter as "preform mold") corresponding to the hemisphere was first prepared by injection molding in order to fabricate a two - layer structure to be combined with a flat plastic film. Then, thermoplastic polymer dissolved in an organic solvent was solidified on a preform mold. As a preliminary study, we proposed injection molding conditions that can minimize X/Y/Z axis deflection value. The effects of the following conditions on the preform mold were analyzed through injection molding CAE, [(1) coolant inlet temperature, (2) injection time, (3) packing pressure, (4) volume-pressure (V/P). As a result, the injection molding process conditions (cooling water inlet temperature, injection time, holding pressure condition (V / P conversion point and holding pressure size)) which can minimize the deformation amount of the preform mold were derived through CAE without applying the experimental design method. Also, the derived injection molding process conditions were applied during actual injection molding and the degree of deformation of the formed preform mold was compared with the analysis results. It is expected that plastic film having various shapes in addition to hemispherical shape using the preform mold produced through this study will be useful for the molding preform molding technology and cast molding technology.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.49-60
• /
• 2019

With the appearance of self-driving cars and electric cars, the automobile industry is rapidly changing. In the midst of these changes, HMI studies are becoming more important as to how the driver obtains safety and convenience with controlling the vehicle. This study sought to understand how automobile manufacturers understand the driving situation, and how they define and limit driver interaction. For this, prior studies about HMI were reviewed and 15 participants performed an on-road study to drive vehicles from five manufacturers with using their interfaces. The results of the study confirmed that buttons and switches that are easily controlled by the user while driving were different from manufacturer to manufacturer. And there are some buttons that are more intensively controlled and others that are difficult to control while driving. It was able to derive 'selection and concentration' from Audi's vehicle, 'optimization of the driving ' from BMW's, 'simple and minimize' from Benz's vehicle, 'remove the manual distraction' from the vehicle of Lexus, and 'visual stability' from KIA's vehicle as the distinctive keywords for the HMI. This shows that each manufacturer has a different definition and interpretation of the driver's driving control area. This study has a distinct value in that it has identified the characteristics of vehicle-specific HMI in actual driving conditions, which is not apparent in appearance. It is expected that this research approach can be useful to see differences in interaction through actual driving despite changes in driving environment such as vehicle platooning and self-driving technology.

• Progress in Medical Physics
• /
• v.30 no.1
• /
• pp.7-13
• /
• 2019

Purpose: To compare the dosimetrical and radiobiological parameters among various volumetric modulated arc therapy (VMAT) techniques using restricted and continuous arc beams for left-sided breast cancer. Materials and Methods: Ten patients with left-sided breast cancer without regional nodes were retrospectively selected and prescribed the dose of 42.6 Gy in 16 fractions on the planning target volume (PTV). For each patient, three plans were generated using the $Eclipse^{TM}$ system (Varian Medical System, Palo Alto, CA) with one partial arc 1pVMAT, two partial arcs 2pVMAT, and two tangential arcs 2tVMAT. All plans were calculated through anisotropic analytic algorithm and photon optimizer with 6 MV photon beam of $VitalBEAM^{TM}$. The same dose objectives for each plan were used to achieve a fair comparison during optimization. Results: For PTV, dosimetrical parameters such as Homogeneity index, conformity index, and conformal number were superior in 2pVMAT than those in both techniques. $V_{95%}$, which indicates PTV coverage, was 91.86%, 96.60%, and 96.65% for 1pVMAT, 2pVMAT, and 2tVMAT, respectively. In most organs at risk (OARs), 2pVMAT significantly reduced the delivered doses compared with the other techniques, excluding the doses to contralateral lung. For the analysis of radiobiological parameters, a significant difference in normal tissue complication probability was observed in ipsilateral lung while no difference was observed in the other OARs. Conclusions: Our study showed that 2pVMAT had better plan quality and normal tissue sparing than 1pVMAT and 2tVMAT but not for all parameters. Therefore, 2pVMAT could be considered the priority choice for the treatment planning for left breast cancer.

• Microbiology and Biotechnology Letters
• /
• v.47 no.3
• /
• pp.390-400
• /
• 2019

In this study, strains isolated from soil samples collected from Busan, Changwon, and Jeju Island were examined to verify their abilities of phosphate solubilization and nitrogen fixation, production of indole-3-acetic acid (IAA), siderophore, and 1-aminocylopropane-1-carboxylyic acid (ACC) deaminase in order to select strains that promote plant growth and play a role in biocontrol of pests or pathogens. According to the results of this study, most of the isolated strains were found to have ability of phosphate solubilization, nitrogen fixation, IAA production, siderophore production, and production of ACC deaminase. These isolated strains might help plant growth by directly improving absorption of nutrients essential for phosphate solubilization and nitrogen fixation. In addition, they can promote plant growth and control resistance to plant diseases through extracellular enzyme activity and antifungal activity. In addition, most of the selected strains were found to survive in various environmental conditions such as temperature, salinity, and pH. Therefore, Pseudomonas plecoglossicida ANG14, Pseudarthrobacter equi ANG28, Beijerinckia fluminensis ANG34, and Acinetobacter calcoaceticus ANG35 were finally selected through a comparative advantage analysis to suggest their potential as novel biological agents. Further studies are necessary in order to prove their efficacy as novel biological agents through formulation and optimization of effective microorganisms, their preservation period, and crop cultivation tests.

• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1126-1135
• /
• 2019

From a sample of bamboo byproduct, the protease-producing yeast strain CO-1 was newly isolated. Strain CO-1 is spherical to ovoid in shape and measures $3.1-4.0{\times}3.8-4.4{\mu}m$. For the growth of strain CO-1, the optimal temperature and initial pH were $30^{\circ}C$ and 4.0, respectively. The strain was able to grow in 0.0-15.0%(w/v) NaCl and 0.0-9.0%(v/v) ethanol. Based on a phylogenetic analysis of its 18S rDNA sequences, strain CO-1 was identified as Pichia anomala. The extracellular protease produced by P. anomala CO-1 was partially purified by ammonium sulfate precipitation, which resulted in a 14.6-fold purification and a yield of 7.2%. The molecular mass of the protease was recorded as approximately 30 kDa via zymogram. The protease activity reached its maximum when 1.0%(w/v) CMC was used as the carbon source, 1.0%(w/v) yeast extract was used as the nitrogen source, and 0.3%(w/v) $MnSO_4$ was used as the mineral source. The protease revealed the highest activity at pH 7.0 and $30^{\circ}C$. This enzyme maintained more than 75% of its stability at a pH range of 4.0-10.0. After heating at $65^{\circ}C$ for 1 hr, the neutral protease registered at 60% of its original activity. The protease production coincided with growth and attained a maximal level during the post-exponential phase.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.454-460
• /
• 2020

The goal of this study was to classify the area of Larix kaempferi forest available for timber production, considering the legal, physical, environmental, and technical constraints, and to optimize the forest resources and the potential of timber production in South Korea for 50 years. The results showed that the area of Larix kaempferi forest available for timber production is limited to 124,000 ha, 48% of the total area. Without further efforts in resource management, sustainable timber production of Larix kaempferi cannot be guaranteed even at the current level of timber supply. To enhance the potential of timber production for this species, two alternatives were considered: a 705-km annual increment of forest roads (alternative 1) and a 1,000-kmannual increment of forest roads (alternative 2) to enlarge forest areas available for timber production. The results showed that alternative 1 is feasiblefor sustainable timber production both at the current level and with a 5% increment of timber supply. However, alternative 1 is not sufficient in the case of a 10% increment of timber supply with a low growing stock, whereas alternative 2 is sufficient. Therefore, an increase in forests roads as well as regeneration efforts are required to improve the timber production potential of Larix kaempferi in South Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.148-159
• /
• 2021

This study focused on searching for optimal locations for general high schools by considering the minimum move distance and the maximum student capacity upon starting a common curriculum based on a high school credit system by taking Seoul as an illustration. The main results were as follows. First, the results from P-median showed that the students' average move distance was below 625m when more than 30% of general high schools offer the common curriculum courses. In addition, the results from MCLP indicated that it was possible to hold all the students. Second, although all the universities located in Seoul open the common curriculum courses, it would not be available to hold all students. On the other hand, when more than 20% of the universities open the courses, MCLP indicated that it was possible to hold the same capacity. In addition, the Office of Education should support moving to the universities offering courses for students affiliated with high schools located in the southeastern area of Seoul and in poor transportation areas. It is expected that by suggesting a problem solving framework regarding space with a spatial optimization method, the study results can be used as a basic data for selecting schools offering common curriculum courses.

• Journal of Communication Design
• /
• v.65
• /
• pp.530-538
• /
• 2018

Recently, museums are attracting the attention of visitors and society. However, research on museum interpretation conducted at domestic and foreign is relatively limited. The plan design of the museum commentary system was mainly based on the perspective of the experts, and most of them do not reflect the desire of the visitors. This study focused on visitors' experience of using museum Interpretation system. Through analyzing the effect of the Interpretation system of the museum that the visitor feels, we examined whether the Interpretation system of the museum meets the cultural needs of the visitors and identified the problems and deficiencies in the system. After that, the problems were rearranged and suggested the main elements of the commentary system of the museum finally, so as to help improve the museum commentary system and the educational function.In the first part of the study, the four major explanatory methods existing in the museum were confirmed. After that, we conducted in - depth interviews on four types of commentary methods and collected existing problems and deficiencies. The results of the type analysis were grouped into 14 types and the questionnaire was used to conduct a general survey on 14 problems. In this study, the user 's discomfort and problems were identified in the museum Interpretation system, and based on this, five key elements necessary for the museum Interpretation system were derived. Among them, inhalation is the weakest element in the museum commentary system, and future research will be conducted on how to apply each factor. I hope that you will be a reference material when you carry out research on the optimization of the Interpretation system of the museum and the improvement of the Interpretation experience.