• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.1-7
• /
• 2017

The atomization of a liquid into multiple droplets has many important industrial applications, including the atomization of fuels in combustion processes and coating of surfaces and particles. Ultrasonic atomizing nozzle has a transducer that receives electrical input in the form of a high frequency signal from a power generator and converts that into mechanical energy at the same frequency. Liquid is atomized into a fine mist spray using high frequency sound vibrations. In coating applications, the unpressurized, low-velocity spray reduces the amount of overspray significantly because the droplets tend to settle on the substrate, rather than bouncing off it. The spray can be controlled and shaped precisely by entraining the slow-moving spray in an ancillary air stream using specialized types of spray-shaping equipment. The desired patterns of spray can be obtained using an air stream. To simulate the water mist behavior of an ultrasonic atomizing nozzle using an air stream, the Lagrangian dispersed phase model was employed using the commercial code FLUENT. The effects of the nozzle contraction shape, water droplet size and the pneumatic pressure drop on the spray characteristics were investigated to obtain the optimal condition for coating applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.270-276
• /
• 2020

3D printing is an additive manufacturing technology that can produce complex shapes in a single process for a range of materials, such as polymers, ceramics, and metals. Recent 3D printing technology has developed to a level that enables the mass-production through an improvement of the printing speed and the continuous development of applicable materials. In this study, 3D printing technology using a laser was applied to manufacture a heat exchanger for an air compressor in a railway vehicle. First, the optimal design of the heat exchanger was carried out by focusing on weight reduction and compactness as a shape suitable for 3D printing. Based on the design derived, heat exchanger prototypes were made of AlSi10Mg alloy material by applying the SLM technique. Moreover, the manufactured prototypes were attached to an existing air compressor, and the heat exchange performance of the compressed air was tested. The test results of the 3D printed prototypes showed a heat exchange performance of approximately 80% and 85% at low and high-pressure, respectively, compared to the existing heat exchanger. From the 𝓔-NTU method results with an external cooling air condition similar to that of the existing heat exchanger, the calculated heat transfer amount of 3D printed parts showed similar performance compared to the existing heat exchanger. As a result, the 3D printed heat exchanger is lightweight with good performance.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.7
• /
• pp.511-515
• /
• 2011

The aim of this study was to investigate the efficiency of temperature, light intensity and pH on the growth rate of Chlorella vulgaris (C. vulgaris). The size of C. vulgaris (FC-16) was $3-8{\mu}m$, having round in shape. The cells of C. vulgaris (FC-16) was cultured in the Jaworski's Medium with deionized water. To evaluate the efficiency of temperature, light intensity and pH on the growth rate of C. vulgaris, six different fractions of temperature ($10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$, $35^{\circ}C$), various light intensities ($100-800{\mu}Em^{-2}s^{-1}$) and seven different fractions of pH (3, 4, 5, 6, 7, 7.5, 9) were prepared. The growth rate of C. vulgaris cultivation was approximately 5.2 to 5.5 times faster, the concentration of Chlorophyll a was also 5 to 5.5 times higher, and cell volume per unit area was 14% higher at $25^{\circ}C$ to $30^{\circ}C$ than those at $10^{\circ}C$. Therefore, the optimal temperature for cultivation of C. vulgaris was estimated $25^{\circ}C$ to $30^{\circ}C$. The growth rate of C. vulgaris increased slowly up to 5 days, exploded after 5 days until 15 days, and then stoped after that. The optimum cultivation period of C. vulgaris was estimated as 15 days. The optimum pH for the growth rate of C. vulgaris was determined pH 7 to 7.5.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.377-392
• /
• 2012

It has been known that small solid particles act as a stabilizer in pickering emulsion system. In this study, we successfully prepared stable pickering emulsion in n-hexylalcohol and water system with $TiO_2$ whose surface was treated by alkylsilane. The optimum condition to prepare pickering emulsion stabilized by $TiO_2$ particles was determined by amount of $TiO_2$ particles and ratio of water and oil phase. The type of pickering emulsion was dependent on wettability of particles for water and n-hexylalcohol. When the amount of $TiO_2$ particles increased up to 5.00 wt%, the stability of pickering emulsion was showed to be improved. The most stable pickering emulsion was prepared in the case of W/O type which has the ratio of oil and water phase (3 : 7). We tried to prepare porous $SiO_2-TiO_2$ composite pigments using a pickering emulsion as template at the optimal condition. Porous pigments were synthesized with Ludox HS-30 as an inorganic material by sol-gel process. The characteristics and shape of porous pigments were measured by optical microscope, SEM, BET, XRD and EDS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.63-71
• /
• 2018

A flower support was developed for real flower decoration automation production system using an ultrasonic wave sealer to automatically produce a system. Because a flower support for real flower decoration that was produced manually could not meet the needs of the consumers, this study developed an automated manufacturing system to increase productivity. A flower support for real flower decoration was constructed using a cap consisting of plastic and plate made from non-woven fabric. The guide was designed to transport the cap to the ultrasonic wave sealer and optimal guide was developed from the test according to the material and shape. To produce the entire system, the guides and accessories were weighed and appropriate motors and pulleys were calculated. Control of the automation production system was based on a PCB board, which increased the reliability and security, and a remote controller with manual and automatic modes was prepared. After development, tests of the transfer precision and repetition accuracy revealed an X-axis of 2.7mm, a Y-axis of 1 mm, and a repetition of 0 mm. The productivity was also checked. The automated machine worked 8 hours/day to make 35 supports and 70 Therefore, the automatic system produces 200% more output than manual work

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6630-6638
• /
• 2014

The concerns for higher returns among investors in Korea are increasing as local interest rates lag behind the global market. The aim of this study was to provide a basis for estimating the precise return on investment to private investors and stakeholders of office buildings by identifying the optimal scale estimation of office building space, derived from managerial expenses. The literature on the economies theories of scales were reviewed, and the average administrative costs on an appropriate scale were assessed by cross-analysis and regression analysis using the U-shaped quadratic and cubic function. The findings suggest that the average office building managerial costs are approximately 6-11% according to the region, 10-13% according to the grade, and 8-9% according to size. Corporate-owned buildings represent the highest in terms of the average managerial costs, and there is an approximately 11.5% difference when it comes to outsourcing. In addition, the elapsed year showed that approximately 5.3 years to meet the lowest U-shaped curve of the average managerial cost. The 'Total floor area' variable shows a ${\bigcap}$-shape as it continue to increase to 72,000-Pyung then decrease gradually. This study presents the fundamental proposition of efficient and practical management of cost, lease and operation for real estate management firms by utilizing LCC.

• Cartoon and Animation Studies
• /
• s.50
• /
• pp.299-325
• /
• 2018

Humans have made a third person over a long history and differentiated them from each other. Discrimination of 'us' and 'them' has led Derrida to make works to look upon the human nature towards animal strangers. This study tries to examine upon the expansion of animal strangers by focusing on 'The Animal That Therefore I am.' Furthermore, the research asserts to pay more attention to animal strangers by looking at his works of how modern people think about animals in the current society. Derrida expresses his 'humiliation' that he felt when he faced his cat after a shower. This emotion brings up the topic that was neglected in the conventional wisdom and casts doubts on this. This emotion of humuliation is only felt by humans, and he explains this is one way of feeling like a 'human.' The researcher therefore focuses on the 'experiences of humans' and looks at the ambivalence of humans in culture and the irony in natural animals. This perspective criticizes Speciesism, which considers people other than oneself able to be suffered. This view also tried to escape anthro-pocentrism and looked at the animals on their own. This study examines current animal strangers with theories of Donna Haraway and Jane Goodal, and analyzes Derrida's artworks with Susan Sontag's philosophy. This aims to lead to a conclusion of how to reach an optimal relationship between human and animal. By focusing on Derrida, who has not been highlighted yet in this country, hopes to create effective communication between human and animal by explaining his artworks through new philosophy of animals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.452-459
• /
• 2017

In recent years, to reduce self-weight of structural elements, the use of SCP (Steel Concrete Plate) instead of prestressed concrete is increasing. Because SCP has a complicated sectional shape and includes a large number of studs, the use of high-fluidity concrete is required. Therefore, in this study, to prevent the restrained shrinkage behavior by the stud, the effects of using an expansive agent (EA) and shrinkage reducing agent (SRA) were investigated, and the optimal mixture proportions to maximize the filling capacity were determined based on the fine aggregate ratio. The test results indicated that the combined use of EA and SRA exhibited the smallest shrinkage. The ratio of the crushed sand and washed sea sand was determined to be 5:5, and the proper fine aggregate ratio was found to be 55.6%, because when the ratio was too high, a decrease in strength and an increase in shrinkage strain were expected. The high-fluidity concrete effectively filled the large-sized SCP module.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.494-501
• /
• 2013

PURPOSE. The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. MATERIALS AND METHODS. The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. RESULTS. The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. CONCLUSION. In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.175-182
• /
• 2018

In this study, the theoretical method and the finite element analysis were designed in parallel to fabricate basic research data on the production of tool horn for cutting machine with ultrasonic vibration energy. In order to perform high-performance ultrasonic cutting, it is necessary to vibrate only with longitudinal vibration instead of transverse vibration. In order to efficiently transmit the mechanical vibration energy, the maximum amplitude should be generated at the output portion. Therefore, the tool horn must be designed so that the excitation frequency of the oscillator and the natural frequency of the tool horn are the same. In order to design the resonance of the tool horn, there are a theoretical approach using the one-dimensional wave equation and a method of reflecting the finite element analysis result to the design model. In this study, the approximate dimensions of the tool horn are first determined through the one- Based on the results of the finite element analysis, the optimal model was selected and reflected in the final shape of the tool horn. We will use this information as the basic data of actual tool horn for cutting, and will compare the production and experimental data with the contents of this research.