• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.3
• /
• pp.142-151
• /
• 2004

A method for the determination of concrete armor unit weights with hydraulic stability and structural stability may be formulated in this paper. The hydraulic stability is analyzed by using Hudson's formula, the structural stability is also studied by evaluation of maximum flexural tensile stresses in armor unit induced by the impact loads and by comparison of those with the tensile resistance strength directly. The applicable criteria for concrete armor units can be represented as a function of design wave heights with return period, armor weights, and tensile strengths for the practical uses. In addition, reliability analyses for two failure modes are carried out to take into account some uncertainties. Finally, a series system for two-failure mode analysis can be made up straightforwardly, by which the optimal weights of armor units can be estimated with the various relative breakages, given the specific target probability of failure under the concepts of reliability-based design method.

• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.27-33
• /
• 2018

In this study, a mixed-interpolated tensorial component 4 nodes method (MITC4) is treated as a numerical analysis model for topology optimization using multiple materials assigned within Reissner-Mindlin plates. Multi-material optimal topology and shape are produced as alternative plate retrofit designs to provide reasonable material assignments based on stress distributions. Element density distribution contours of mixing multiple material densities are linked to Solid Isotropic Material with Penalization (SIMP) as a design model. Mathematical formulation of multi-material topology optimization problem solving minimum compliance is an alternating active-phase algorithm with the Gauss-Seidel version as an optimization model of optimality criteria. Numerical examples illustrate the reliability and accuracy of the present design method for multi-material topology optimization with Reissner-Mindlin plates using MITC4 elements and steel materials.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.798-800
• /
• 2005

In competitive electricity markets, the System Operator (SO) coordinates the overall maintenance schedules whenever the collective maintenance schedule reported to SO by Gencos & Transco in the pool does not satisfy the specified operating criteria, such as system reliability or supply adequacy. We propose a two-layer mathematical algorithm amenable to maintenance scheduling problem into master problem and sub-problem. The master problem coordinates the scheduling, and sub-problem, DC optimal power flew, checks the adequacy. The proposed algorithm was demonstrated with a case study.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.306-315
• /
• 2012

Purpose: To ensure good quality munitions, we require quantitative risk management and optimal risk management of system characteristics. Methods: Failure mode and effects analysis (FMEA) is a widely used technique to assess or to improve reliability of products at early stage of design and development. Traditionally, the prioritization of failures for corrective actions is performed by developing a risk priority number (RPN). Results: This paper reestablishes an effective methodology for prioritization of failure modes in FMEA procedure. Revised evaluation criteria of RPN are devised. Conclusion: To verify the proposed methodology, it is applied to RPN evaluation for K21 infantry combat vehicle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.29-35
• /
• 2014

This paper aims to obtain the effect of lightweight on Radius rod. The response surface method used in the paper is the statistical method. Optimization method is performed with the Radius rod using the lightweight material. Structural analysis is executed by using the ANSYS program to find static and dynamic responses. From this study result, it is verified that the response surface method has the advantage of optimum value in comparison with other optimization methods. The analysis is also performed by response surface method to derive optimal design values. Steel model and aluminium initial model are obtained by finite element analysis to clarify design criteria and the results are compared with three models each other. The weights can be reduced by optimal design analysis results of these models similar to those of existing products. The quantitative goals in this study can also attained through results of fatigue analyses. The reliability on optimal design of Radius rod can be improved by use of structural and fatigue analysis results.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.249-273
• /
• 2004

Finding an optimal solution in MADN[(Multi-Attribute Decision-Making) problems is difficult, when the number of alternatives, or that of attributes is relatively large Most of the existing mathematical approaches arrive at a final solution on the basis of many unrealistic assumptions, without reflecting the decision-maker's preference structure exactly. In this paper we suggest a model that helps us find a group consensus without assessing these parameters in specific cardinal values. Therefore, This research provides a comprehensive Decision Making of the theory and methods applicable to the analysis of decisions that involve risk and multiple criteria attributes. after, The emphasis of the procedure will be on developments from the fields of decisions analysis and utility theory of Taguchi Method. This theoretical development will be illustrated through the discussion of several real-world application and a case study. When the multiple number of decision makers are involved in the decision making procedure, the problem of uncertainties invariably occurs, because of the different views between them. In this paper, New decision making model using Taguchi Method is applied to effectively model the multi-attribute-decision making(MADM) procedure in the uncertainties dominated two area(quantitative and qualitative factors), Quantitative factors evaluation is used Loss Function of Taguchi, qualitative factors evaluation is used 50 ratio by each specialist. thus it can be used for aiding of preferable alternative. as a result, We will be proved efficiency about New decision making model of applied Taguchi Method with Analytical presentation of all the expecting outcomes when a specific strategy or an alternative plan is selected under expecting future environment.

• Journal of Korea Water Resources Association
• /
• v.38 no.2
• /
• pp.97-110
• /
• 2005

This paper presents a procedure of evaluation of reservoir capacity for additional water storage for dam rehabilitation. One of the techniques on the extension of rainfall has been developed, and the daily stream flows were simulated by the NWS-PC long-term rainfall-runoff model with the input of the extended daily rainfall which was stochastically generated by the nonhomogeneous markov chain model. We peformed a reliability analysis to Guisan dam about the optimal capacity of dam rehabilitation by using performance criteria that Hashimoto et al. (1982) presented. We estimated that the most suitable water level is approximately 155EL.M. suggested that this method can use supplemental methods to estimate optimum dam scale.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.71-86
• /
• 1983

Current R.C. retaining wall design is bared on WSD, but the reliability based design method is more rational than the WSD. For this reason, this study proposes a reliability based design criteria for the cantilever retaining wall, which is most common type of retaining wall, and also proposes the theoretical bases of nominal safety factors of stability analysis by introducing the reliability theory. The limit state equations of stability analysis and design of each part of cantilever retaining wall are derived and the uncertainty measuring algorithms of each equation are also derived by MFOSM using Coulomb's coefficient of the active earth pressure and Hansen's bearing capacity formula. The levels of uncertainties corresponding to these algorithms are proposed appropriate values considering our actuality. The target reliability indices (overturning: ${\beta}_0$=4.0, sliding: ${\beta}_0$=3.5, bearing capacity: [${\beta}_0$=3.0, design for flexure: [${\beta}_0$=3.0, design for shear: ${\beta}_0$=3.2) are selected as optimal values considering our practice based on the calibration with the current R.C. retaining wall design safety provisions. Load and resistance factors are measured by using the proposed uncertainties and the selected target reliability indices. Furthermore, a set of nominal safety factors, allowable stresses, and allowable shear stresses are proposed for the current WSD design provisions. It may be asserted that the proposed LRFD reliability based design criteria for the R.C. retaining wall may have to be incorporated into the current R.C. design codes as a design provision corresponding to the USD provisions of the current R.C. design code.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1066-1076
• /
• 2018

Objective: The reliability of size measurements of liver metastases from neuroendocrine tumors (NETs) on contrast-enhanced computed tomography (CT) phases made by different readers may be hampered due to transient, variable rim enhancement in arterial phase (AP) or portal venous phase (PVP) images. We aimed to assess the reliability of tumor size measurements in pre- and post-contrast scans. Materials and Methods: The study coordinator selected target lesions according to Response Evaluation Criteria in Solid Tumors 1.1 guidelines in 44 consecutive patients with pathologically confirmed NET liver metastases. Two blinded readers measured the longest diameters of target lesions on pre-contrast, AP, and PVP images twice with a 4-week interval. Inter- and intra-observer agreements were evaluated using Bland-Altman plots and 95% limit of agreement (LOA) calculations. Results: Of the 79 target lesions (approximate mean size of 3 cm), 45 showed rim enhancement. Inter-observer agreement assessed based on LOA was highest in pre-contrast CT images (-6.1-5.7 mm), followed by PVP (-7.9-7.1 mm) and AP (-8.5-7.4 mm) images. Intra-observer agreement showed the same trend: -2.8-2.9 mm and -2.9-2.9 mm for readers 1 and 2, respectively, on pre-contrast CT, -2.8-2.9 mm and -3.0-3.2 mm, respectively, on PVP, and -3.2-4.2 mm and -3.4-3.2 mm, respectively, on AP images. Mean tumor diameters differed significantly among the phases in the following increasing order: pre-contrast CT, PVP, and AP images. Conclusion: There was better inter- and intra-observer agreement in size measurements of NET liver metastases on pre-contrast scans than on AP and PVP scans. Pre-contrast CT may be the optimal for measuring NET liver metastases if its accuracy is proven.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.31-47
• /
• 2022

The purpose of this study is to develop a reliable tool that can classify and measure detailed indicators related to the performance of ESG implementation in the country and verify their applicability. Based on World Bank's data as input data, 67 types of ESG-related detailed indicators measured in a total of 239 countries were tested to derive an optimal model that could group detailed indicators into three categories: environment, society, and governance. As a result of the analysis, it was confirmed that a total of 10 detailed indicators had a statistically significant relationship with the country's ESG performance. In addition, the detailed indicators showed a positive correlation with the primary latent variables E, S, and G, and showed a high overall index in the suitability of the model to secure the validity and reliability of variable input. As a result, this study confirmed that several detailed performance indicators constituting ESG can be classified as latent variables, and it can be said that clear criteria for the selection method and input validity of variables were presented.