Journal of Korean Society of Coastal and Ocean Engineers (한국해안해양공학회지)

Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회)
권호 표지

Reliability-based Design Method of Concrete Armour Units with Structural Stability

구조적 안정성을 고려한 콘크리트 피복재의 신뢰성 설계

  • Published : 2004.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

A method for the determination of concrete armor unit weights with hydraulic stability and structural stability may be formulated in this paper. The hydraulic stability is analyzed by using Hudson's formula, the structural stability is also studied by evaluation of maximum flexural tensile stresses in armor unit induced by the impact loads and by comparison of those with the tensile resistance strength directly. The applicable criteria for concrete armor units can be represented as a function of design wave heights with return period, armor weights, and tensile strengths for the practical uses. In addition, reliability analyses for two failure modes are carried out to take into account some uncertainties. Finally, a series system for two-failure mode analysis can be made up straightforwardly, by which the optimal weights of armor units can be estimated with the various relative breakages, given the specific target probability of failure under the concepts of reliability-based design method.

수리학적 안정성과 구조적 안정성을 동시에 만족시키면서 피복재의 중량을 산정할 수 있는 방법이 수립되었다. 수리학적 안정성은 Hudson의 경험식을 이용하여, 구조적 안정성은 충격하중 작용시 피복재 내부에 발생되는 최대인장응력을 산정, 피복재의 인장 저항력과 비교하는 개념으로 해석되었다. 이와 같이 산정된 수리학적 안정성과 구조적 안정성에 대한 적용한계를 재현기간별 설계 유의파고, 피복재의 중량, 그리고 인장 저항력의 함수로 제시하여 실무자들이 쉽게 사용할 수 있도록 하였다. 또한 결정론적 산정법의 불확실성을 고려하기 위하여 수리학적 안정성과 구조적 안정성에 대한 신뢰성 해석이 추가로 수행되었다. 두 파괴모드를 하나의 직렬계로 구성하여, 신뢰성설계법에서 이용되는 목표파괴확률을 가지고 단면파괴율의 함수로 피복재의 최적중량을 산정할 수 있었다.

Keywords

References

  1. 이철응 (2003). 코크리트 피복재의 단면파괴에 대한 신뢰성 해석. 한국해안 . 해양공학회지, 15(2), 86-96
  2. Anglin, C.D., Scott, R.D., Turcke, D.J. and Turke, M.A. (1990). The development of structural design criteria for breakwater armor units. Proc. Stresses in Con. Armor Units, ASCE, 123-148
  3. Baird, W.R, Readshaw, J.S., Scott, R.D. and Turcke, D.J. (1986). A procedure for the analysis and design of concrete armor units. Proc. 20th. Int. Coast. Engrg. Conf., ASCE, 1739-1753
  4. Burcharth, H.F. (1981). Full-scale dynamic testing of Dollosses to destruction. Coast. Engrg., 4, 229-251
  5. Burcharth, H.F. and Brejnegaad-Nielsen, T. (1986). The influence of waist thickness of Dolosse on the hydraulic stability of Dolosse armour. Proc. 20th. Int. Coast. Engrg. Conf, ASCE, 1783-1796
  6. Burcharth, H.F., d'Angremond, K., Van der Meer, J.W. and Liu, Z. (2000). Empirical formula for breakage of Dollosse and Tetrapods. Coast. Engrg., 40, 183-206 https://doi.org/10.1016/S0378-3839(00)00010-7
  7. Burcharth, H.F., Howell, G.L. and Liu, Z. (1991). On the determination of concrete armour unit stresses including specific results related to Dolosse. Coast. Engrg., 15, 107-165 https://doi.org/10.1016/0378-3839(91)90044-H
  8. CIAD (1985). Computer aided evaluation of the reliability of a breakwater design. Zoetermeer, Netherlands, 105-121
  9. Franco, L., Noli, A., Girolamo, P.D. and Ercolani, M. (2000). Concrete strength and durability of prototype tetrapods and dolosse: Results of field and laboratory tests. Coast. Engrg., 20, 207-219
  10. Howell, G.L. (1988). Measurements of forces on Dolos armor units at prototype scale. Proc. 21st. Int. Coast. Engrg. Conf., ASCE, 2355-2369
  11. Lin, W.M., Rau, C. and Su, R.L. (1986). The structural responses of Dolos armor units under the dynamic loading. Proc. 20th. Int. Coast. Engrg. Conf., ASCE, 2065-2078
  12. McDougal W.G., Melby, J.A. and Tedesco, J.W. (1988). Wave forces on concrete armor units.ㅊ, 114(5), 582-598 https://doi.org/10.1061/(ASCE)0733-950X(1988)114:5(582)
  13. Melby, J.A. (1990). An overview of the Crescent city Dolos design procedures. Proc. Stresses in Con. Armor Unit, ASCE, 312-326
  14. Melby, J.A. (1993). Dolod design procedure based on Crescent city prototype data. Tech. Rep. CHL-99-17, U.S. Army Eng. Waterways Exp. MS, St., CERC, Vicksburg
  15. Melby, J.A. and Howell, G.L. (1989). Incorporation of prototype Dolos static response in Dolos. XXIII Congr. Int. Assoc. Hyd. Res., Ottawa, Canada
  16. Nishigori, W., Endo, T. and Shimada, A. (1986). On stress in Tetrapods under wave action. Proc. 20th. Int. Coast. Engrg. Conf., ASCE, 2119-2132
  17. PIANC (1992). Analysis of rubble mound breakwaters. Permanent Int. Assoc. of Navig. Cong., Belgium
  18. Scott, R.D., Turcke, D.J. and Baird, W.F. (1986). A unique installation scheme for measuring loads in model Dolod units. Proc. 20th. Int. Coast. Engrg. Conf., ASCE, 2212-2223
  19. SPM (1984). Coastal Engineering Research Center, US Army Corps Engineers, Washington, DC
  20. Tedesco, J.W. and McDougal, W.G. (1985). Nonlinear dynamic analysis of concrete armour units. Computers and Structs., 21, 189-201 https://doi.org/10.1016/0045-7949(85)90242-1
  21. Thoft-Chiistensen, P. and Baker, M.J. (1982). Structural reliability theory and its applications. Springer-Verlag, New-York
  22. Timco, G.W. (1983). On the structural integrity of Dolos units under dynamic loading conditions. Coast. Engrg., 7, 91-101 https://doi.org/10.1016/0378-3839(83)90029-7
  23. Zwamborn, J.A. and Phelp, D. (1990). Structural tests on Dolosse. Proc. of Stresses in Con. Armor Units, ASCE, 40-60
  24. Zwamborn, J.A., Scholtz, D.J.P. and Claassens, H. (1988). Stability and structural behaviour of strength improved Dollosse. Proc. 21st. Int. Coast. Engrg. Conf., ASCE, 2075-2089