• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.301-304
• /
• 2004

In this paper, we propose a method to find the optimal direction of the multi beam between each station on the point-to-point link by genetic algorithm. In the proposed method, maximum value in optimal direction on each station is used as a fitness function. The beam of millimeter wave generates a lot of multi-peak because of much influence of noise. About each gene, we simulated this method using 16bit, 32bit, and 32bit split algorithm. 32bit split uses 16bit gene information. Each antenna makes 32bit gene information by adding gene information of two antennas having 16bit gene. Through the proposed method, we could have gotten a good output without 32bit gene information.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1257-1260
• /
• 2005

This paper is related to optimization in the image data format, which can make a great effect in performance of data compression and is based on the wavelet transform and JPEG2000. This paper established a criterion to decide the data format to be used in wavelet transform, which is on the bases of the data errors in frequency transform and quantization. This criterion has been used to extract the optimal data format experimentally. The result were (1, 9) of 10-bit fixed-point format for filter coefficients and (9, 7) of 16-bit fixed-point data format for wavelet coefficients and their optimality was confirmed.

• 한국CDE학회논문집
• /
• 제1권3호
• /
• pp.234-241
• /
• 1996

Recently, Genetic Algorithms(GAs), which consist of genetic operators named selection crossover and mutation, are widely adapted into a search procedure for structural optimization. Contrast to traditional optimal design techniques which use design sensitivity analysis results, GAs are very simple in their algorithms and there is no need of continuity of functions(or functionals) any more in GAs. So, they can be easily applicable to wide territory of design optimization problems. Also, virtue to multi-point search procedure, they have higher probability of convergence to global optimum compared with traditional techniques which take one-point search method. The introduction of basic theory on GAs, and the application examples in combination optimization of ten-member truss structure are presented in this paper.

• 한국전자거래학회지
• /
• 제1권2호
• /
• pp.161-173
• /
• 1996

It Is a typical scenario in concurrent engineering/design that different perspectives of each team members participating In the project exist, and those perspectives lead to conflicting decisions. The model 'resolution network' proposed in this work provides system-mediated resolution for all related team engineers to consider to optimize the manufacture in general. This paper focuses on development of the general architecture of the model and a search engine called Mediator to determine a resolution network from a given constraint network. The Mediator manages the constraint network, determines the most optimistic resolution called optimal point in terms of satisfying overall production goal , and use the optimal point to mediate controversial issues among teams. The biggest merit of our model is that it provides teams with resolution with logical and rational reasoning.

• 대한전자공학회논문지
• /
• 제19권6호
• /
• pp.80-83
• /
• 1982

X-밴드 주파수에서 λg/4 개방 마이크로스트립 선로 급전형 스로트 점렬을 구현하였다. 최적 급전점은 실험적으로 결정하였고 스로트 점각의 여러 주파수에서 입력 임피던스와 복재 패턴을 측정하였으며 다소 다른 길이의 16개 소자와 본 논문에서 제시한 급전 선로를 사용하여 주파수 대역을 증가시켜 보았다. A quarter-wavelength open circuited microstripline slot array is realized at X-band froquency. The optimal feeding point is experimentally determined. The input impedance of the slot array for various frequencies and its radiation pattern are measured. The bandwidth of the slot array is increased by using the 4×4 elements which are slightly different in length and feeding network which is suggested in this papers.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.428-433
• /
• 2001

This paper presents the control algorithm for maximum efficiency drives of an induction motor system with the high dynamic performance. This system uses a simple model of the induction motor that includes equations of iron losses. The model, which only requires the parameters of induction motor, is referred to a field-oriented frame. The minimum point of the input power can be obtained at the steady state condition. The reference torque and flux currents for the vector control of induction motors are calculated by the optimal efficiency control algorithm. The drive system with the proposed efficiency optimization controller has been implemented by a 32 bit floating point TMS320C32 DSP chip. The results show the effectiveness of the control strategy proposed for the induction motor drive.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.11-14
• /
• 2003

In this paper, we use Fuzzy Logic and Potential field method for optimal path planning of an autonomous mobile robot and apply to navigation for real-time mobile robot in 2D dynamic environment. For safe navigation of the robot, we use both Global and Local path planning. Global path planning is computed off-line using sell-decomposition and Dijkstra algorithm and Local path planning is computed on-line with sensor information using potential field method and Fuzzy Logic. We can get gravitation between two feature points and repulsive force between obstacle and robot through potential field. It is described as a summation of the result of repulsive force between obstacle and robot which is considered as an input through Fuzzy Logic and gravitation to a feature point. With this force, the robot fan get to desired target point safely and fast avoiding obstacles. We Implemented the proposed algorithm with Pioneer-DXE robot in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.694-695
• /
• 2011

The recent concerns over the threat of global climate change and the requirements of national reduction of $CO_2$ emission have led to the diversification of energy resources and a large scale integration of renewable resources. In these circumstances, the policy decision currently made by the government sector includes several programs to promote the equipment of large scale generating assets to use wind energy. However, the power systems and wind farms need such innovative operation scheme schemes that maintain an adequate level of system security for continuing growth of renewable resources. This paper presents a method for determining optimal operating points for wind farms by making use of a nonlinear interior point method.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.507-514
• /
• 2013

In this paper, the proposed charging algorithm is converted from the charging mode to compensate the transient state in the solar battery charging system. The maximum power point tracking (MPPT) control methods and the various charging algorithms for the optimal battery charging are reviewed. The proposed algorithm has excellent transient characteristics compare to the previous algorithm by adding the optimal control method to compensate the transient state when the charging mode switches from the constant current mode to the constant voltage mode based on the conventional constant-current constant-voltage (CC-CV) charging algorithm. The effectiveness of the proposed method has been verified by simulations and experimental results.

• 산업공학
• /
• 제17권4호
• /
• pp.414-425
• /
• 2004

This study presents the decision of priority for optimal design guide to improve disassembly process. Disassembly process is divided into recognition, transfer and disassembly of assembly point and recognition, transfer and remove of grasp point. Significant influential factors are derived from analyzing the above process. And those factors are used for making the check list to evaluate the properties of parts in each process. Furthermore, the weight with considering disassembly process is also used to determine weight of each process. On the base of the above sequence, qualitative score of disassemblability of each process that is enabled to compare different disassembly processes can be acquired. Ultimately the score helps to decide the priority of design guide for disassembly process.