• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.463-474
• /
• 2019

This paper presents the effect of winding configuration on the kVA rating of a wye-connected autotransformer applied to a 12-pulse rectifier. To describe the winding configuration of the wye-connected autotransformer, position and proportional parameters are defined and their quantitative relation is calculated. The voltages across and currents through the windings are measured under different winding connections. Consequently, a relation between the kVA rating and position parameter is established in accordance with the analysis, and the optimal winding configuration is obtained on the basis of this relation. A wye-connected autotransformer with the least equivalent kVA rating and simplest winding configuration is designed and applied to the 12-pulse rectifier. Simulations and experiments are conducted to validate the theoretical analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.307-308
• /
• 2010

• 산업경영시스템학회지
• /
• 제24권67호
• /
• pp.19-26
• /
• 2001

A design issue for a flexible manufacturing system is to find the number of each resource type which assures a given production ratio with a minimal cost. The FMS is modeled as a closed queueing network with a local buffer of limited capacity. An efficient method to determine this optical configuration is presented. The proposed method consists of three steps : 1) determine a lower configuration, 2) derive a heuristic solution, 3) find the optimal solution. The derived heuristic solutions are close to the optical solution.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.163-168
• /
• 1991

In the FMS design, the important points are the selection of parts and the determination of configuration. The common approach method which solve the selection of parts are the determination of configuration has improved that the two points are simultaneously. This study finds the best method which parts combination and configuration are satisfied at the same time. And the optimal replace time of equipment under limited budget on the view Point of engineering. economy.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.511-515
• /
• 2012

At the moment, with an interest in renewable energy sources (RES) that continue to grow its penetration will be expected to considerably increase in the future power system. However, this penetration of RES leads to new challenges to be solved in electric power systems. In this paper, optimal configuration of renewable energy resources and operation strategy is presented. By using this methodology for allocation of the optimal sizes and types, system operational efficiency and stability of the microgrid will be maximized.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.48-53
• /
• 2004

In this paper, the task-oriented optimal configuration in the sense of Velocity and Force manipulability measure of manipulator mounted on ROV is considered. Manipulability is a quantitative measure of manipulator's capability obtained under the limits of joint velocities or torques. The base arrangements and optimal joint configuration of manipulator, that maximize the manipulability measure under the constraints of given task, are investigated. With the two types of base arrangements of manipulator, workspace analysis is carried out to investigate merits and demerits of each arrangement on the view of manipulability measure. To find optimal joint configuration for a given task with each arrangement, the SQP(Sequential Quadratic Programming) optimization are performed. Weighted linear combination of velocity and force manipulability measure is object function for SQP optimization. The kinematic parameters of Dual Orion manipulator which will be mounted on KORDI ROV are used for simulation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.247-254
• /
• 2008

The primary objective of this research is to develop an efficient design and optimization methodology for SRM Wagon Wheel Grain and to develop of software for practical designing and optimization of Wagon Wheel grains. This work will provide a design process reference guide for engineers in the field of Solid Rocket Propulsion. Using these proposed design methods, SRM Wagon Wheel grains can be designed for various geometries, their optimal solutions can be found and best possible configuration be attained thereby ensuring finest design in least possible iterations & time. The main focus is to improve computational efficiency at various levels of the design work. These have been achieved by the following way. a. Evaluation of system requirements and design objectives. b. Development of Geometric Model of Wagon Wheel grain configuration. c. Internal ballistic performance predictions. d. Preliminary designing of the Wagon Wheel grain configuration involving various independent geometric variables. e. Optimization of the grain configuration using Sequential Quadratic Programming f. In depth analysis of the optimal results considering affects of various geometric variables on ballistic parameters and analysis of performance prediction outputs have been performed g. Development of software for design and optimization of Wagon Wheel Grain. By using these proposed design methods, SRM Wagon Wheel grains can be designed by using geometric model, their optimal solutions can be found and best possible configuration be attained thereby ensuring finest design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.703-706
• /
• 2008

Large distortion is made by toed-in camera configuration in the TV condition that has short viewing distance, when the gaze position of a stereoscopic image coincides with that of real space. Therefore, in the TV condition, we confirmed that the proper camera configuration is the modified parallel configuration, and found distortionless optimal stereoscopic image condition using this camera configuration.

• 한국전자거래학회지
• /
• 제22권2호
• /
• pp.99-121
• /
• 2017

모든 영역에서 조직의 디지털 자산을 보호하기 위해, 보안 규제를 강제하고 있는 추세이다. 문제는 조직 내의 보안 통제장치 가운데 투입된 노력이나 보안 수준을 외부에서 확인할 수 없는 통제장치가 존재한다는 것이다. 이 논문에서는 확인할 수 없는 통제장치가 존재하는 경우, 합리적인 보안 수준이 무엇인지 불완전 계약이론을 적용하여 분석하였다. 이를 위해, 확인할 수 없는 통제장치를 무시하는 경우의 비이성적 규제(naive standard)와 모두 확인할 수 있다고 가정할 경우의 완전정보하의 규제와 비교 분석하였다. 결과는 통제장치의 구성에 따라 달라졌다. 우선 평형구성(parallel configuration)하에서는 완전정보하의 규제와 최적규제가 동일하였으며, 순차구성(serial configuration)하에서는 최적규제 수준이 낮아야 하며, 다른 비교대상 규제와는 차이를 보였다. 최적구성(best shot configuration)하에서 확인가능한 통제장치가 비용 효율성이 높은 경우, 흥미롭게도 비합리적 규제가 최적규제수준과 동일한 것으로 나타났다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.625-628
• /
• 1998

This paper presents an application of genetic algorithms(GAs) for optimal configuration of distribution network. Three problems have been used to show how genetic algorithms are modified and applied. Solutions to the problems are found by minimizing the cost function which is directly related with balancing the loads. Simulation results show that genetic algorithms are technically feasible if they are tailored to meet the needs of real problems.