• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.732-737
• /
• 2001

The mathematical method was developed and numerical analyses were carried out with various parameters to provide substantial data for optimal design and operation of urban utility systems. The composition of systems and their specifications, such as co-generation system, heat pump system, incineration system and other heating and cooling system could be obtained through these analyses for various resource and energy requirements in urban area. As results the system constituents and operating characteristics, and their economic performances such as the value of objective function, initial and an operating costs were discussed for various load patterns. The effective system design method and the excepted effects of the several unused energy recovery systems were also briefly discussed with the variation of the buildings and facilities species and their capacities.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.360-366
• /
• 2002

Central composite experimental design was employed to determine the optimal concentration of medium constituents for griseofulvin production by Penicillium griseofulvum MTCC 1898 and Penicillium griseofulvum MTCC 2004. The optimal concentration of sucrose, $K_2HPO_4,\;NaNO_3,\;and\;FeSO_4{\cdot}7H_2O$ were found to be 48.08 g/1, 1.228 g/1 , 2.7 g/1, and 0.011 g/1, respectively, for Penicillium griseofulvum MTCC 1898, and for Penicillium griseofulvum MTCC 2004, 23.52 g/1, 43.67 g/1, and 0.0434 g/1 of glucose, lactose, and $MnSO_4{\cdot}H_2O$, respectively. The yield of griseofulvin under optimal composition of medium constituents increased by 1.26 and 1.38 times than prior to optimization, for Penicillium griseofulvum MTCC 1898 and Penicillium griseofulvutn MTCC 2004, respectively.

• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.647-651
• /
• 1995

A tylosin-hyperproductive mutant of S. fradiae MNU20 was isolated among 3500 strains obtaincd from either MNNG- or UV-treated Streptomyces fradiae NRRL2702. The composition of optimal medium for tylosin production was formulated as followed as: 4 g soluble starch, 1 g glucose, 1 g corn steep liquor, 7.5 ml soy bean oil, 0.2 g KH$_{2}$PO$_{4}$, 1 g Na$_{2}$S$_{2}$O$_{3}$$\cdot $5H$_{2}$O, 2 g CaCO$_{3}$, 2 g NaCl, 0.001 g CoCl$_{2}$$\cdot $6H$_{2}$O in 1 liter of distilled water. With the optimal medium, S. fradiae MNU20 was able to produce 159 mg tylosin (g biomass)$^{-1}$, indicating that tylosin productivity of Streptomyces fradiae NRRL2702 was increased 14 times higher by mutation. When the effect of valine, succinate, and natural zeolite on tylosin production was investigated by using the optimal medium, these substances essentially enhanced tylosin production and their addition time during culture period appeared to be critical for the increase of tylosin production.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1686-1690
• /
• 1989

Using the anisotropic etching characteristics of N2H4-H2O solutions, Si diaphragm was fabricated for the integrated sensors. The optimal composition and temperature of the etching solution in (100) Si etching process was established to be 50mol% N2H4 in H2O at 105\ulcorner\ulcorner for both higher etch rate (=2.6\ulcorner/min) and better surface quality of etched (100) planes. Based on the above optimal etching condition, the electrochemical etch-stop technique was employed to form n-type Si diaphragm having a thickness of 20\ulcorner and the thickness of diapragm could exactly be controlled to 20\ulcorner\ulcorner.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.295-298
• /
• 1989

Using the anisotropic etching characteristics or $N_2H_4-H_2O$ solution, Si diaphragm was fabricated for the integrated sensor. The optimal composition and temperature of the solution in Si etching process was established to be 50mol% $N_2H_4$ in water at $105{\pm}2^{\circ}C$ for both higher etch rate(=$2.6{\mu}m/min$) and better surface quality of etched {100} planes. Under the optimal etching condition, the electrochemical etch stop technique was employed to form Si diaphragm for pressure sensor and diaphragm thickness was exactly controlled to $20{\pm}2{\mu}m$.

• Management Science and Financial Engineering
• /
• v.9 no.2
• /
• pp.47-68
• /
• 2003

We consider the customer order scheduling problem with job capacity restriction where the number of jobs in the shop at the same time is fixed. In the customer order scheduling problem, each job is part of some batch (customer order) and the composition of the jobs (product) in the batch is pre-specified. The objective function is associated with the completion time of the batches instead of the completion time of the jobs. We first summarize the known results for the general customer order scheduling problems. Then, we establish some new properties for the problems with job capacity restriction. For the case of unit processing time with the objective of minimizing makespan, we develop a polynomial-time optimal procedure for the two machine case. For the same problem with a variation of no batch alternation, we also develop a polynomial-time optimal procedure. Then, we show that the problems with the objectives of minimizing makespan and minimizing average batch completion time become NP-hard when there exist arbitrary number of machines. Finally, We propose optimal solution procedures for some special cases.

• Journal of Environmental Science International
• /
• v.21 no.7
• /
• pp.779-785
• /
• 2012

Several tests and experimental work have been done for identifying the best growth conditions and accumulated amount of lipid moiety in B. braunii, a microalga(UTEX 572) in terms of media composition. The specific growth rate was found to be the highest at 0.15 g/L-day when the phosphorus concentration was doubled with the other ingredients at the normal level. Experiments for varied media compositions revealed that the accumulation of lipid was the highest at 48% (dry cell weight based) in the nitrogen deficient medium and its corresponding specific growth rate was comparative to that in the normal BG 11 medium. In the bubble column experiments, carbon dioxide containing air produced four times more cell mass than air only. Light and glucose addition also enhanced cell mass with maximum, 1.8 g/L and accordingly 42% of lipid composition, which turned out to be a better strategy for higher lipid-producing microalgal culture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.254-265
• /
• 1994

For solving the optimal routing problem (ORP) in large data networks, and algorithm called the hierarchical aggregation/disaggregation and decomposition/composition gradient project (HAD-GP) algorithm os proposed. As a preliminary work, we improve the performance of the original iterative aggregation/disaggregation GP (IAD-GP) algorithm introduced in [7]. THe A/D concept used in the original IAD-GP algorithm and its modified version naturally fits the hierarchical structure of large data networks and we would expect speed-up in convengence. The proposed HAD-GP algorithm adds a D/C step into the modified IAD-GP algorithm. The HAD-GP algorithm also makes use of the hierarchical-structure topology of large data networks and achieves significant improvement in convergence speed, especially under a distributed environment. The speed-up effects are demonstrated by the numerical implementations comparing the HAD-GP algorithm with the (original and modified) IAD-GP and the ordinary GP (ORD-GP) algorithm.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.413-418
• /
• 2009

Glass systems based on Ca, Sr, Ba, and Zn modified alumino-boro silicates were investigated in order to improve the dielectric and mechanical properties of a typical LTCC (low temperature co-fired ceramic) which was developed for high frequency highly-integrated modules. The glass was prepared by a typical melting procedure and then mixed with cordierite fillers to fabricate glass/ceramic composite-type LTCC materials. The amount of cordierite filler was fixed at 50 volumetric%. For an optimal glass composition of 7.5% CaO, 7.5% BaO, 5% ZnO, 10% $Al_2O_3$, 30% $B_2O_3$, and 40% $SiO_2$ in mole ratio, the resultant LTCC composite showed a dielectric constant of 5.8 and a dielectric loss ($tan{\delta}$) of 0.0009 after firing at $900^{\circ}C$. An average bending strength of 160MPa was obtained for the optimal composition.

• Natural Product Sciences
• /
• v.24 no.1
• /
• pp.71-78
• /
• 2018

The present study deals with the determination of optimal values of operating parameters such as the temperature of heating, the mass of the plant material and the volume of water leading to the best yield of electromagnetic induction (EMI) heating extraction of Algerian Thymus fontanesii essential oil. After an appropriate choice of the three critical variables, eight experiments leaded to a mathematical model as a first-degree polynomial presenting the response function (yield) in the relation to the operating parameters. From the retained model, we were able to calculate the average response, the different effects and their interactions. The maximum of essential oil recovery percentage relative to the initial mass of plant material was 1.69%, and was obtained at ($140^{\circ}C$, 250 g and 4.5 L). The chemical composition of the Algerian T. fontanesii essential oil under the obtained optimal conditions ($140^{\circ}C$, 250 g and 4.5 L), determined by GC/MS and GC/FID, reveled of the presence of major components such as: carvacrol ($70.6{\pm}0.1%$), followed by p-cymene ($8.2{\pm}0.2%$).