• The Korean Journal of Mycology
• /
• v.17 no.3
• /
• pp.124-131
• /
• 1989

Some factors effecting on mycelial growth and cultural substrates using pine sawdust were investigated to develop an artificial cultivation technique. The optimal temperature and media pH for the mycelial growth were at $25^{\circ}C$ and 4.0, respectively. The mycelial growth was not different among three isolates tested. Among them ASI 19003 isolate showed the highest mycelial density and fruitbody yield. Among supplements added into pine sawdust, wheat bran was the best and its appropriate percentage was 20 for the mycelial growth. The mycelial densities were uprisen according to the amounts of the supplement. The highest yield, 107g/bottle of the sporophores of the mushroom was obtained from the substrates supplemented by 30% of wheat bran, but no fruitbody was formed on non supplemented one. Optimal moisture contents of the substrates was different for the mycelial growth, pinheading and fruitbody yields. Sixty five, 60 and 75% of moisture contents of the substrates were optimal for the mycelial growth, pinheading and fruitbody yields, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.73-84
• /
• 1993

In this research, configuration design optimization of plane truss structure has been tested by using decomposition technique. In the first level, the problem of transferring the nonlinear programming problem to linear programming problem has been effectively solved and the number of the structural analysis necessary for doing the sensitivity analysis can be decreased by developing stress constraint into member stress approximation according to the design space approach which has been proved to be efficient to the sensitivity analysis. And the weight function has been adopted as cost function in order to minimize structures. For the design constraint, allowable stress, buckling stress, displacement constraint under multi-condition and upper and lower constraints of the design variable are considered. In the second level, the nodal point coordinates of the truss structure are used as coordinating variable and the objective function has been taken as the weight function. By treating the nodal point coordinates as design variable, unconstrained optimal design problems are easy to solve. The decomposition method which optimize the section areas in the first level and optimize configuration variables in the second level was applied to the plane truss structures. The numerical comparisons with results which are obtained from numerical test for several truss structures with various shapes and any design criteria show that convergence rate is very fast regardless of constraint types and configuration of truss structures. And the optimal configuration of the truss structures obtained in this study is almost the identical one from other results. The total weight couldbe decreased by 5.4% - 15.4% when optimal configuration was accomplished, though there is some difference.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.3
• /
• pp.178-187
• /
• 1982

This pot experiment was undertaken to find out the optimum fertilization ratios of total anions to total cations, ${\Sigma}A/{\Sigma}C$, and the optimum application rates of total macro-nutrients in various soil conditions. Soil samples were collected from uncultivated mountains and hills where grassland development was under consideration. 1. The optimum application ratios of ${\Sigma}A/{\Sigma}C$ and the optimum application rates of total macro-nutrients for the high yields of mixed grass-clover sward in various grassland soils were computed by the Hom$\acute{e}$s systematic variation techniqu.e. 2. With respect to the optimum application ratios of ${\Sigma}A/{\Sigma}C$ in fertilization in a mixed grass-clover sward, the grass yield and botanical composition were distinctly proportional to ${\Sigma}A$ wheras the regume yield and botanical composition were proportional to ${\Sigma}C$. 3. The optimum fertilization rates of total macro-nutrients for the high legume yields were depended upon ${\Sigma}A/{\Sigma}C$ ratios. These optimum rates were in proportional to ${\Sigma}C$ ratios and were inversely proportional to ${\Sigma}A$ ratios. 4. The efficiencies of ${\Sigma}A$ and ${\Sigma}C$ in relation to the grass and grass plus legume yields were highest with the low ratios of each other and the low fertilization rates of total macronutrients. The ${\Sigma}A$ effieiency in the legume yield tended to be similar to that of ${\Sigma}A$ related to the grass yield noted above except Daegu soil. The ${\Sigma}C$ efficiency, however, was proportional to the ${\Sigma}C$ ratio, although that was varied with the fertilization rates of total macro-nutrients and with the kinds of soils. 5. The yield of mixed forages, yield component, and botanical composition in a mixed sward were greatly influenced by the ${\Sigma}A/{\Sigma}C$ ratios, the fertilization rates of total macronutrients, and the interactions of ratio and rate noted above. In addition, these effects were generally different and opposite according to grass and legume.

• Journal of Yeungnam Medical Science
• /
• v.12 no.1
• /
• pp.124-134
• /
• 1995

It is the most important to select optimal culture conditions to promote safe embryo growth in the technique of human in vitro fertilization and embryo transfer. It has been shown that the addition of biologic fluids, such as blood serum, of various origins, improved fertilization and early cleavage rates in numerous species. The purpose of this study is to attempt to measure developmental potential of mouse eggs fertilized and cleaved in Ham's F10 culture medium containing a chelating agent, EDTA and fetal cord serum. In this study, we selected 40 female mice and 20 male mice, and investigated optimal serum concentrations for mouse embryo growth. Two cell stage mouse embryos were cultured in Ham's F-10 medium, Ham's F-10 medium with various concentrations of EDTA, or Ham's F-10 medium with EDTA and 10% human cord serum. Developmental ratios to morula in Ham's F-10 medium containing various concentrations of EDTA and/or 10% fetal cord serum were significantly higher than in unsupplemented Ham's F-10 medium (p<0.05). Developmental ratios to blastocyst in Ham's F-10 containing 10% fetal cord serum and $50{\mu}M$ or $100{\mu}M$ EDTA were significanltly higher than in unsupplemented Ham's F-10 medium (p<0.05). Developmental ratios to morula in Ham's F-10 containing 10% fetal cord serum and $100{\mu}M$ EDTA were significanltly higher than in Ham's F-10 with 10% fetal cord serum used commonly in many human IVF centers(p<0.05). Developmental ratio to blastocyst in Ham's F-10 containing 10% fetal cord serum and $100{\mu}M$ EDTA was significanlty higher than in Ham's F-10 with $200{\mu}M$ EDTA(P<0.05). In summary, embryo development to morula and blastocyst was significanlty higher in the presence of human cord serum or EDTA than in the unsupplemented medium. The most significanly development to morula and blastocyst was obtained at Ham's F-10 medium with $100{\mu}M$ concentration of EDTA and 10% fetal cord serum. These results suggest that Ham's F-10 medium containing 10% fetal cord serum and optimal concentrations of EDTA significantly promoted early cleavage of mouse zygotes, and these will be useful as basic data for the selection of culture medium in human in vitro fertilization.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.243-254
• /
• 2019

With the recent accelerated policy-making and interests in new renewable energy, plans to develop and supply the new renewable energy have been devised across multiple regions in Korea. Solar energy, in particular, is being applied to small-scale power supply in provincial areas, as solar cells are used to convert solar energy into electric energy to produce electric power. Nonetheless, in the case of solar power plants, the need for a large stretch of land and considerable sum of financial support implies that the planning step should take into consideration the most suitable meteorological and geographical factors. In this study, the proxy variables of meteorological and geographical factors associated with solar energy were considered in analyzing the vulnerable areas regarding the photovoltaic power generation facility across the nation. GIS was used in the spatial analysis to develop a map for assessing the optimal location for photovoltaic power generation facility. The final vulnerability map developed in this study did not reveal any areas that exhibit vulnerability level 5 (very high) or 1 (very low). Jeollanam-do showed the largest value of vulnerability level 4 (high), while a large value of vulnerability level 3 (moderate) was shown by several administrative districts including Gwangju metropolitan city, Jeollabuk-do, Chungcheongbuk-do, and Gangwon-do. A value of vulnerability level 2 (low) was shown by the metropolitan cities including Daegu, Ulsan, and Incheon. When the 30 currently operating solar power plants were compared and reviewed, most were found to be in an area of vulnerability level 2 or 3, indicating that the locations were relatively suitable for solar energy. However, the limited data quantity for solar power plants, which is the limitation of this study, prevents the accuracy of the findings to be clearly established. Nevertheless, the significance of this study lies in that an attempt has been made to assess the vulnerability map for photovoltaic power generation facility targeting various regions across the nation, through the use of the GIS-based spatial analysis technique that takes into account the diverse meteorological and geographical factors. Furthermore, by presenting the data obtained for all regions across the nation, the findings of this study are likely to prove useful as the basic data in fields related to the photovoltaic power generation.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.715-727
• /
• 2023

To provide detailed and appropriate meteorological information in mountainous areas, the Korea Forest Service has established an Automatic Mountain Meteorology Observation Station (AMOS) network in major mountainous regions since 2012, and 464 stations are currently operated. In this study, we proposed an optimal kriging technique with lapse rate correction to produce gridded temperature data suitable for Korean forests using AMOS point observations. First, the outliers of the AMOS temperature data were removed through statistical processing. Then, an optimized theoretical variogram, which best approximates the empirical variogram, was derived to perform the optimal kriging with lapse rate correction. A 500-meter resolution Kriging map for temperature was created to reflect the elevation variations in Korean mountainous terrain. A blind evaluation of the method using a spatially unbiased validation sample showed a correlation coefficient of 0.899 to 0.953 and an error of 0.933 to 1.230℃, indicating a slight accuracy improvement compared to regular kriging without lapse rate correction. However, the critical advantage of the proposed method is that it can appropriately represent the complex terrain of Korean forests, such as local variations in mountainous areas and coastal forests in Gangwon province and topographical differences in Jirisan and Naejangsan and their surrounding forests.

• Progress in Medical Physics
• /
• v.24 no.2
• /
• pp.108-118
• /
• 2013

Currently, an arterial spin labeling (ASL) magnetic resonance imaging (MRI) technique does not routinely used in clinical studies to measure perfusion in brain because optimization of imaging protocol is required to obtain optimal perfusion signals. Therefore, the objective of this study was to investigate changes of perfusion-weighed signal intensities with varying several parameters on a pulsed arterial spin labeling MRI technique obtained from a 3T MRI system. We especially evaluated alternations of ASL-MRI signal intensities on special brain areas, including in brain tissues and lobes. The signal targeting with alternating radiofrequency (STAR) pulsed ASL method was scanned on five normal subjects (mean age: 36 years, range: 29~41 years) on a 3T MRI system. Four parameters were evaluated with varying: 1) the labeling gap, 2) the labeling delay time, 3) the labeling thickness, and 4) the slice scan order. Signal intensities were obtained from the perfusion-weighted imaging on the gray and white matters and brain lobes of the frontal, parietal, temporal, and occipital areas. The results of this study were summarized: 1) Perfusion-weighted signal intensities were decreased with increasing the labeling gap in the bilateral gray matter areas and were least affected on the parietal lobe, but most affected on the occipital lobe. 2) Perfusion-weighted signal intensities were decreased with increasing the labeling delay time until 400 ms, but increased up to 1,000 ms in the bilateral gray matter areas. 3) Perfusion-weighted signal intensities were increased with increasing the labeling thickness until 120 mm in both the gray and white matter. 4) Perfusion-weighted signal intensities were higher descending scans than asending scans in both the gray and white matter. We investigated changes of perfusion-weighted signal intensities with varying several parameters in the STAR ASL method. It should require having protocol optimization processing before applying in patients. It has limitations to apply the ASL method in the white matter on a 3T MRI system.

• Korean Security Journal
• /
• no.11
• /
• pp.203-226
• /
• 2006

A highly sophisticated expertise and systematic and integrated management of security operation are essential for a crowded stadium. a special object of security guarding. Nonetheless, the recent incident in a singing concert hall reveals the overall problem like the lacking safety management system. lacking deployment of professional security personnel, absence of safety manuals and safety measures, as well as the lack of professionalism of private sector security companies. In this study, we presented three categories that needed improvement, like the legal and institutional improvement, improvement of policy and improvement of operation which are required to set up the model to operate the optimal private sector security duties. For the revision of law and institution for a better and more desirable method, we discussed the revision of related laws and regulations pursuant to the security operation at places where events are held, including the revision of law on security guarding work, regulation on common housing management, uniformity of security guarding, and law on performance. For the improvement of policies, we discussed the introduction of security consultants, strengthening the security instructor system, expansion of relevant organizations, establishment of mutual cooperation, privatization of profitable events, improvement of awareness about the security activities provided by private sector, policy for the professionalism of private security operation, expansion of security exhibition and seminar. For the improvement of operation. we discussed professional security techniques. such as the technique of security consulting, the application of CPTED technique, the technique for the integration of system, the method of operation, the establishment of a system to support public security operations and volunteers, establishment of a manual for security guarding performance, modernization and high tech-oriented equipment, organization of security guarding entity in which the industry, academic society and government participates together.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.1-10
• /
• 2014

In this study, two different types of dredged fill injection methods are introduced and filling experiments were conducted to analyze the impact of each technique to the distribution and deposition of dredged soil fill and how it influence the final tube shape. Two transparent plastic tubes were fabricated to observe the deposition behavior of the deposited fill material. Both tubes measured 4.0 meters in length (L) and has vinyl tube diameters (D) of 0.5m and 0.7m. T-type and I-type inlet system are also introduced in this paper. The influence of this inlet systems to the distribution and deposition behavior of dredged soil fill inside the vinyl tubes were observed during the experiment. After the sedimentation of the slurry mixture, the water on top of the soil sediments are removed and the slurry mixture was re-injected into the vinyl tube, this process was carried out repeatedly. The shape changes of the vinyl tube, e.g. the changes in both tube height and width, are constantly monitored after each slurry injection and water draining phases. Crater formation was observed in the case of I-Type inlet system and a non-uniform sediment distribution occurred. For the diffusion deposit of soil particles to long distance are minimal shape technique using the T-Type inlet system. Therefore the undrain filling height ratio ($H/D_0$) was found to be around 0.54 to 0.64 and the horizontal strain ratio ($W/D_0$) ranges from 1.45 to 1.54. The filling soil height is proportional to dredged-material filling phases, but, horizontal strain ratio is constant or inversely reduced so that the center of tube body is raised in the upward direction.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.119-142
• /
• 2015

With the explosive growth in the volume of information, Internet users are experiencing considerable difficulties in obtaining necessary information online. Against this backdrop, ever-greater importance is being placed on a recommender system that provides information catered to user preferences and tastes in an attempt to address issues associated with information overload. To this end, a number of techniques have been proposed, including content-based filtering (CBF), demographic filtering (DF) and collaborative filtering (CF). Among them, CBF and DF require external information and thus cannot be applied to a variety of domains. CF, on the other hand, is widely used since it is relatively free from the domain constraint. The CF technique is broadly classified into memory-based CF, model-based CF and hybrid CF. Model-based CF addresses the drawbacks of CF by considering the Bayesian model, clustering model or dependency network model. This filtering technique not only improves the sparsity and scalability issues but also boosts predictive performance. However, it involves expensive model-building and results in a tradeoff between performance and scalability. Such tradeoff is attributed to reduced coverage, which is a type of sparsity issues. In addition, expensive model-building may lead to performance instability since changes in the domain environment cannot be immediately incorporated into the model due to high costs involved. Cumulative changes in the domain environment that have failed to be reflected eventually undermine system performance. This study incorporates the Markov model of transition probabilities and the concept of fuzzy clustering with CBCF to propose predictive clustering-based CF (PCCF) that solves the issues of reduced coverage and of unstable performance. The method improves performance instability by tracking the changes in user preferences and bridging the gap between the static model and dynamic users. Furthermore, the issue of reduced coverage also improves by expanding the coverage based on transition probabilities and clustering probabilities. The proposed method consists of four processes. First, user preferences are normalized in preference clustering. Second, changes in user preferences are detected from review score entries during preference transition detection. Third, user propensities are normalized using patterns of changes (propensities) in user preferences in propensity clustering. Lastly, the preference prediction model is developed to predict user preferences for items during preference prediction. The proposed method has been validated by testing the robustness of performance instability and scalability-performance tradeoff. The initial test compared and analyzed the performance of individual recommender systems each enabled by IBCF, CBCF, ICFEC and PCCF under an environment where data sparsity had been minimized. The following test adjusted the optimal number of clusters in CBCF, ICFEC and PCCF for a comparative analysis of subsequent changes in the system performance. The test results revealed that the suggested method produced insignificant improvement in performance in comparison with the existing techniques. In addition, it failed to achieve significant improvement in the standard deviation that indicates the degree of data fluctuation. Notwithstanding, it resulted in marked improvement over the existing techniques in terms of range that indicates the level of performance fluctuation. The level of performance fluctuation before and after the model generation improved by 51.31% in the initial test. Then in the following test, there has been 36.05% improvement in the level of performance fluctuation driven by the changes in the number of clusters. This signifies that the proposed method, despite the slight performance improvement, clearly offers better performance stability compared to the existing techniques. Further research on this study will be directed toward enhancing the recommendation performance that failed to demonstrate significant improvement over the existing techniques. The future research will consider the introduction of a high-dimensional parameter-free clustering algorithm or deep learning-based model in order to improve performance in recommendations.