• Journal of Computing Science and Engineering
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2012

Computed tomography (CT) images are widely used for the analysis of the temporal evaluation or monitoring of the progression of a disease. The follow-up examinations of CT scan images of the same patient require a 3D registration technique. In this paper, an automatic and robust registration is proposed for the rigid registration of 3D CT images. The proposed method involves two steps. Firstly, the two CT volumes are aligned based on their principal axes, and then, the alignment from the previous step is refined by the optimization of the similarity score of the image's voxel. Normalized cross correlation (NCC) is used as a similarity metric and a downhill simplex method is employed to find out the optimal score. The performance of the algorithm is evaluated on phantom images and knee synthetic CT images. By the extraction of the initial transformation parameters with principal axis of the binary volumes, the searching space to find out the parameters is reduced in the optimization step. Thus, the overall registration time is algorithmically decreased without the deterioration of the accuracy. The preliminary experimental results of the study demonstrate that the proposed method can be applied to rigid registration problems of real patient images.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.109-119
• /
• 2015

In recent years, a rapid growth in the population and urbanization led to an increasing industrial growth. The inadequate treated-wasted water from industry and various non-point sources causes significant negative effects on the stream water. For past few decades, extensive researches have been performed on water purification process. The purpose of this study is to investigate mechanical performance and water purification properties of porous concrete by using effective microorganisms through the site assessment test. The mechanical performance evaluation results showed that the increase void ration caused an decrease in the strength. The optimal mix rate was found to be 15% void rate From the site assessment, it was evaluated that the porous concrete improved the quality of the water and the purification ratios are 34.1 for SS, 14.6% for BOD, 34.9% for COD, 11.4% for T-N, and 12.6% for T-P. The porous concrete and the related purification technique can reduce the non-point pollution sources flowing into the river.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.93-99
• /
• 2009

The fuzzy control, neural network and genetic algorithm(GA) are algorithms to make the intelligence of system more higher. In this paper, we optimized the fuzzy controller using a genetic algorithm for desire response. Also a compensated fuzzy controller has dual rules. One control rule used to decrease the overshoot and rise time occurring in transient response region and another fuzzy control rule use to decrease the steady state error and rapildy to converge at the convergence region. GA is necessary to optimal the exchange time of the two fuzzy control rule base. Fuzzy-GA controller have a process of reproduction, crossover and mutation and we experimented by hydraulic servo motor control system We could observe that compensated Fuzzy-GA controller have good control performance compare to the fuzzy control technique have two rule base table.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.240-253
• /
• 2017

Latin hypercube sampling is widely used design-of-experiment technique to select design points for simulation which are then used to construct a surrogate model. The exploration/exploitation properties of surrogate models depend on the size and distribution of design points in the chosen design space. The present study aimed at evaluating the performance characteristics of various surrogate models depending on the Latin hypercube sampling (LHS) procedure (sample size and spatial distribution) for a diverse set of optimization problems. The analysis was carried out for two types of problems: (1) thermal-fluid design problems (optimizations of convergent-divergent micromixer coupled with pulsatile flow and boot-shaped ribs), and (2) analytical test functions (six-hump camel back, Branin-Hoo, Hartman 3, and Hartman 6 functions). The three surrogate models, namely, response surface approximation, Kriging, and radial basis neural networks were tested. The important findings are illustrated using Box-plots. The surrogate models were analyzed in terms of global exploration (accuracy over the domain space) and local exploitation (ease of finding the global optimum point). Radial basis neural networks showed the best overall performance in global exploration characteristics as well as tendency to find the approximate optimal solution for the majority of tested problems. To build a surrogate model, it is recommended to use an initial sample size equal to 15 times the number of design variables. The study will provide useful guidelines on the effect of initial sample size and distribution on surrogate construction and subsequent optimization using LHS sampling plan.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.299-312
• /
• 2008

The fat of Tra and Basa catfish (Mekong Delta, Viet Nam) was evaluated for the first time as the potential feedstock for biodiesel production, due to its abundance, availability and cheap cost. The unsaturated fatty acid contents of Tra and Basa fat were 57.97% and 64.17%, respectively. Biodiesel was prepared from Tra and Basa fat by methanolysis reaction using alkali catalysts like sodium hydroxide and potassium hydroxide. Effects of various process parameters on biodiesel production, such as molar ratio of methanol to fat, catalyst concentration, temperature and time were investigated. As those results, the transesterification can be performed under moderate conditions, and the biodiesel yields were shown more than 90%. KOH catalyst was the best catalyst for biodiesel production from both Basa and Tra fat. As the feedstock aspect, Basa fat was indicated more efficiency than that of Tra fat. The maximum yield could be achieved by the transesterification from Basa fat with 5:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 50 min. For Tra fat, the optimal condition were at 6:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 45 min. Nowadays, due to cheaper cost and abundance, Tra fat is a promised resource for cheap biodiesel production in Viet Nam.

• Korean Journal of Animal Reproduction
• /
• v.15 no.3
• /
• pp.179-187
• /
• 1991

This experiment was carried out to develop a new technique of identifying XX of XY-bearing bisected embryos prior to implantation by immunological method. H-Y antiserum prepared in inbred Wastar female rats by repeated immunization with spleen cells from males of the same strain. The reactivity of H-Y antibody was confirmed by culturing mouse embryos in the medium containing H-Y antiserum and complement obtained from the guinea pig. The optimal condition for the activity of H-Y antibody was also investigated by culturing embryos under the concentraton or affected H-Y antibody was also investigated by culturing embryos under the concentration or affected H-Y antibody and culture rate. However, production of live young or sex rates of male and female from embryos transferred with psudopregnant. The biological test with the morula stage embryos showed that H-Y antibody was formed in all female rats immunized with spleen cell, but it was formed only in 80% female rats immunized with the antigen. When the bisected mouse embryos were cultured in vitro for 5~6 hours in morula stage, of 457 bisected embryos 81.4% of then were developed to the blastocyst stage. When the concentration rate of complement to H-Y antiserum varied from 1.0~5.0${mu}ell$, the lysis-rate of embryo was 19.5 to 67.3%. The concentration rate of complement did not influence the lysis-rate of embryos(P<0.05). The morphology embryos of bisected, zona-free and intact embryos showed the embryos lysis rate of 58.6, 42.7 and 48.5% respectively(P<0.05). Pregnancy rate were 50.0, 45.5 and 57.1% in psudopregnant recipient transferred with bisected, zona-free and intact blastocyst embryos. However, production of live youngs, sexual rate of male or female was 24(50.0:50.0), 22(45.5:55.5) and 36(58.3:41.7)mice, but affected and non affected half embryos with H-Y antiserum treatment was 23.1 and 26.7%. Also production of live youngs and sexual rate was 14(92.9:7.1) and 17(17.6:82.4)mice in affected and non affected half embryos in H-Y antiserum treatment(P<0.05).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.144-149
• /
• 2002

This paper presents a technique for real time multiprocessor parallel processing to develop an avionic system computer(ASC) which integrates the avionics control, navigation and fire control, cursive and raster graphic symbol generation into one line replaceable unit. The proposed method has optimal performance by adopting a logically asymmetric structure between four 32bit RISC processors based on the master-slave multiprocessing, a tightly coupled interaction level with the time shared common bus and global memory, and an efficient bus arbitration algorithm. The ASC has been verified through a series of flight tests. The relevant tests also have been rigorously conducted on the prototype ASC such as electrical test, environmental test, and electromagnetic interference test.

• Korea-Australia Rheology Journal
• /
• v.17 no.3
• /
• pp.117-123
• /
• 2005

Background: Reduced deformability of red blood cells (RBCs) may play an important role on the pathogenesis of chronic vascular complications of diabetes mellitus. However, available techniques for measuring RBC deformability often require washing process after each measurement, which is not optimal for day­to-day clinical use at point of care. The objectives of the present study are to develop a device and to delineate the correlation of impaired RBC deformability with diabetic nephropathy. Methods: We developed a disposable ektacytometry to measure RBC deformability, which adopted a laser diffraction technique and slit rheometry. The essential features of this design are its simplicity (ease of operation and no moving parts) and a disposable element which is in contact with the blood sample. We studied adult diabetic patients divided into three groups according to diabetic complications. Group I comprised 57 diabetic patients with normal renal function. Group II comprised 26 diabetic patients with chronic renal failure (CRF). Group III consisted of 30 diabetic subjects with end-stage renal disease (ESRD) on hemo-dialysis. According to the renal function for the diabetic groups, matched non-diabetic groups were served as control. Results: We found substantially impaired red blood cell deformability in those with normal renal function (group I) compared to non-diabetic control (P = 0.0005). As renal function decreases, an increased impairment in RBC deformability was found. Diabetic patients with chronic renal failure (group II) when compared to non-diabetic controls (CRF) had an apparently greater impairment in RBC deformability (P = 0.07). The non-diabetic cohort (CRF), on the other hand, manifested significant impairment in red blood cell deformability compared to healthy: control (P = 0.0001). Conclusions: The newly developed slit ektacytometer can measure the RBC deformability with ease and accuracy. In addition, progressive impairment in cell deformability is associated with renal function loss in all patients regardless of the presence or absence of diabetes. In diabetic patients, early impairment in RBC deformability appears in patients with normal renal function.

• Journal of Korean Society for Quality Management
• /
• v.44 no.4
• /
• pp.799-811
• /
• 2016

Purpose: The conjoint analyst in marketing are interested in detecting whether there exist synergy or antagonistic effects between two attributes. In the cases where attributes have two or three levels, we research on the design of survey questionnaire to estimate all the main effect and as many two factor interaction effects as possible. Methods: We consider the balanced incomplete block (BIB) mixed level factorial design $2^f{\times}3^g$ or fractional factorial design. To reduce the number of questions in a questionnaire, we propose the balanced incomplete block mixed level design with minimum aberration which is generated by implementing proc factex in SAS. Also, we propose using two or three level BIB factorial design instead of mixed level designs by transforming three level attributes into two attributes of two levels and two level attribute into three level attribute by using dummy level technique. Results: We propose three methods for designing survey questionnaire where the block and design generators are found with practical number of questions in a questionnaire. By analyzing all the respondents survey data generated by the simulation study, we find the proper model and do the concepts optimization. Conclusion: The proposed methods of designing survey questionnaires seem to perform well in the sense that the proper model, and then the optimal concept is found in a case study where all the respondents survey data are generated by the simulation study.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.52-66
• /
• 2009

The increase of rice productivity, the decrease of rice demand, aging farmers, and the market-opening of rice along with the domestic and international conditions changes have been led to the increase of the abandoned rice paddy fields. Such abandoned rice paddy fields have been left in many areas and most of them have become wetlands. The purpose of this study is methodology of selection to the wetland for development in the abandoned rice paddy fields along with surroundings. The selection of habitat suitability index assessment study to conservation and restoration was done through hydrology, wild animals habitation, wetland vegetation, outside disturbance, and natural purification capacity assessment. In addition, the same method was applied to assessment items and standards for both the restoration site selection and the type of restoration. Both assessment items and standards were applied to the sites, drawn on the maps, and overlayer for the comprehensive map, and then the wetland suitability index was applied to the suitable site. The development technique was applied to 10 sites near the Banwol Stream watershed in Gunpo, Gyeonggi province. The selection of conservation, restoration, and the optimal sites can lead to not only the biodiveristy increase in agricultural or semi natural areas but also to the establishment of ecological networks in national level.