• Radiation Oncology Journal
• /
• v.12 no.2
• /
• pp.253-262
• /
• 1994

The patterns of the conventional radiation treatment fields and their shielding blocks are analysed to determine the optimal dimension of the MultiLeaf Collimator (MLC) which is considered as an essential tool for conformal therapy. Total 1109 radiation fields from 303 patients (203 from Asan Medical center, 50 from Baek Hosp and 50 from Hanyang Univ. Hosp.) were analysed for this study. Weighted case selection treatment site (from The Korean Society of Therapeutic Radiology 1993). Ninety one percent of total fields have shielding blocks. Y axis is defined as leaf movement direction and it is assumed that MLC is installed on the cranial-caudal direction. The length of X axis were distributed from 4cm to 40cm (less than 21cm for $95\%$ of cases), and Y axis from 5cm to 38cm (less than 22cm for $95\%$ of cases). The shielding blocks extended to less than 6cm from center of the field for $95\%$ of the cases. Start length for ninety five percent of block is less than 10cm for X axis and 11cm for Y axis. Seventy six percent of shielding blocks could be placed by either X or Y axis direction, $7.9\%$ only by Y axis, $5.1\%$ only by X axis and It is reasonable to install MLC for Y direction. Ninety five percent of patients can be treated with coplanar rotation therapy without changing the collimator angle. Eleven percent of cases of cases were impossible to replace with MLC. Futher study of shielding technique is needed for $11\%$ impossible cases. The treatment field dimension of MLC should be larger than $21cm{\times}22cm$. The MLC should be designed as a pair of 21 leaves with 1cm wide for an acceptable resolution and 17cm long to enable the leaf to overtravel at least 6cm from the treatment field center.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.107-114
• /
• 2008

In wireless access systems, there has been much interest in enhancing the performance of orthogonal frequency division multiplexing OFDM) in a frequency selective fading channel. If the channel is static and is perfectly known to both the transmitter and the receiver, the water-filling technique with adaptive modulation is known to be optimal. However, for OFDM systems, this requires intensive traffic overheads for reporting channel side information on all subcarriers to the transmitter In this paper, we propose an adaptive modulation and coding scheme for bit-interleaved coded OFDM (BIC-OFDM) for downlink packet transmissions with reduced feedback information. To minimize the feedback information, we employ a rate adaptation method based on the OFDM symbol rather than on each subcarrier. To illustrate the performance gap between the optimal water-filling and the proposed scheme, we will compare cutoff rates for both schemes. It is shown that the loss is less than 2dB while the proposed scheme significantly reduces the feedback payloads. Also, the OFDM system in multiuser environment with subcarrier grouping is considered. It is shown that by exploiting multiuser diversity the throughput of the proposed scheme approaches the channel outage capacity as the number of users and the number of subcarrier groups increase.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.563-569
• /
• 2016

This paper presents the resizing method of columns and beams that considers column-to-beam strength ratios to simultaneously control the initial stiffness and ductility of steel moment frames. The proposed method minimizes the top-floor displacement of a structure while satisfying the constraint conditions with respect to the total structural weight and column-to-beam strength ratios. The design variable considered in this method is the sectional area of structural members, and the sequential quadratic programming(SQP) technique is used to obtain optimal results from the problem formulation. The unit load method is applied to determine the displacement participation factor of each member for the top floor lateral displacement; based on this, the sectional area of each member undergoes a resizing process to minimize the top-floor lateral displacement. Resizing members by using the displacement participation factor of each member leads to increasing the initial stiffness of the structure. Additionally, the proposed method enables the ductility control of a structure by adjusting the column-to-beam strength ratio. The applicability of the proposed optimal drift design method is validated by applying it to the steel moment frame example. As a result, it is confirmed that the initial stiffness and ductility could be controlled by the proposed method without the repetitive structural analysis and the increment of structural weights.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.477-483
• /
• 2013

The widlass base frame which is currently used is designed by lots of volume and costs so as to obtain high rigidity in spite of the greatly external load. The purpose of this research is to draw conceptual design of optimal design which can satisfy high rigidity existing windlass base frame has and lessening the body at the same time. Therefore, it progressed conceptual design by applying Topology optimization and Size optimization based on the finite-element analysis for the early model and indicated the result by comparing the early model with optimized model. As the result of Topology optimization, its stress was increased by about 6MPa and weight was decreased by about 560kg in comparison with the early model. In addition, in case of Size optimization, its stress was increased by about 7MPa and weight was decreased by about 1,560kg in comparison with the early model.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.631-643
• /
• 2006

Moving objects in a mobile environment to change their position based on the change of time require a query with their position as a basis. Efficient Regional Decision for Continuous Skyline Queries requires objectively pre-calculating the OSR(Optimal Skyline Region) regardless of the speed and direction of the moving objects. It proposes techniques to reduce the frequency of continuous queries by choosing a VCircle(Validity Circle) as safe location which has radius of the distance to the closest region with position on the moving object at center. But, a VCircle's area varies based on the Moving object's position from first marked time of continuous query. Therefore, the frequency of its continuous query is variable and also when the object moves inside of OSR, query can re-occur frequently In this paper, we suggest a technique of selecting an IVCircle(Interior Validity Circle) in a Skyline Region as the static Safe Region using the characteristics of the OSR. An Interior IVCircle can be calculated in advance when the OSR is decided. Our experiment shows that the frequency of using IVcircle as safe region reduced than that of using VCircle as safe region by 52.55%.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.94-110
• /
• 2003

This study utilizes the dataset of Topex/Poseidon(T/P) altimeter sea surface height (1992-2000 yr., 286 cycles)to investigate the tempore-spatial variability in the East (Japan) Sea. Optimal interpolation (Ol) technique was applied to the pre-processed T/P dataset (level 2) to produce sea surface height anomaly (SSHA) map on regular grids. Spectral analyses of the timeseries of the SSHA at chosen stations and empirical orthogonal function (EOF) analysis of the SSHA in the entire East Sea were made. Distribution of the SSHA can be divided by the southern and northern regions sharply by the polar front situated in the middle of the East Sea. The southern region under the direct influence of the Tsushima Current exhibits higher amplitude of the SSHA fluctuation, while the northern region does relatively smaller one. The spatio-temporal variability of the SSHA in the East Sea can be characterized by the five modes of the EOFs accounting for more than 85% of the total variance. The first mode dominates the SSHA variation in the entire domain with strong seasonal and inter-annual periods accounting for the 72.3% of the total variance. The other modes (up to 5th account for 14%) are responsible for the SSHA variation associated with the local current system, meandering of the polar frontal axis, and mesoscale eddies. Spectral peaks with significant confluence level show semi-annual, annual and interannual (2, 3-4 years) periods.

• Journal of the Korean Society for Library and Information Science
• /
• v.8
• /
• pp.183-207
• /
• 1981

Library standards have been the source of considerable controversy, whereas many problems are involved in developing stardard for university library collections. For evaluation purposes, standards should be precise, quantifiable and measurable. In the United States, however, standards for academic libraries are limited to qualitative statements and principles. Quantitative standards, when given, are ususally related to the number of population in the institution being served, or the prescribed quantitative objectives are often arbitrarily formulated by value judgements. The study in this paper attempts to explain the problems involved in developing quantitative standard for academic library collections. Two problems facing in the formulation of the optimal size of collection are identified. One is the theoretically faulty concept of adequacy of collection to meet the situations of diversity of university libraies, and the other is the difficulties in quantification and measurement, along with the lack of concept of adequacy of collection. However, quantification of adequate size of collection is proved to be useful on the pratical level, even though not valid theoretically. ACRL, Clapp/Jordan and Voigt developed formulas or models for setting the optimal size of a library collection for any particular university library. The main purpose of this study is the analysis of the above formulas. ACRL standard was drawn from obervation and analysis of statistcs in leading library collections. In academic field, this judgement appears to have been based on the assumption that a high-grade institution would be apt to have a good library collection. This study criticizes ACRL standard for its failure to include some determinants of measurements, and points out the limitations of the standard. In contrast. Clapp/Jordan developed a formula rather scientifically based upon bibliographical sources. This is similarly empirical but has the advantage of bringing into play the elements which make universities diverse in nature. Both ACRL and Clapp/Jordan formulas share two major defects. (1) the specific subject needs of the collection are not indiacted directly, and (2) percentage rate of growth is an indicator in measuring the potential utility of a collection. Thus both formulas failed to provide a basis for meaningful evaluation. Voigt further developed a model for determining acquisition rates for currently published materials based on bibliographic technique. Voigt model encourages experimentation with different programs and different allocations of input resources, designed to meet the needs of the library's particular population. Standard for university library collections can be formulated in terms of input(traditional indicator), or additionally, in terms of output(cost-effectiveness). Cost effectiveness is expressed as user satisfaction, ability to provide wanted materials within a reasonable time period. Thus simple quantitative method does not cover all the situations of diversity of university library collections, nor measures the effectiveness of collections. Valid standard could not be established without further research.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.666-680
• /
• 2006

To obtain basic data for the utilization of saltwort (Salicornia herbacea L.) as a functional ingredient in steamed foam cake, the optimum component ratios for major raw ingredients (saltwort, salt, and wheat flour) as independent variables that affect the product quality were scientifically determined using RSM (response surface methodology) technique. A three-factor and five-level rotational central composite design was used for treatment arrangement. The complete design consisted of 16 experimental points. The three independent variables selected for the RSM experiment were amounts of saltwort (X$_1$, 5${\sim}$25 g), salt (X$_2$, 0${\sim}$10 g), and wheat flour (X$_3$, 470${\sim}$530 g). The optimum responses in specific gravity of the batter and volume, color, texture, and sensory evaluation result of the cake were obtained. The specific gravity and viscosity of the batter at p<0.01 was verified from the regression curve. The characteristic of the batter was influenced by all independent variables, but was extremely dependent on the amount of saltwort ordinary points of the surface responses from the batter formed the minimum points for specific gravities of the batter while viscosities of the batter appeared with the saddle points. Analysis of the response indicated that the amount of saltwort was the most influential factor over the physical properties of the cake, among the dependent variables. Ordinary points of the surface responses from the cake formed the maximum points for loaf volume, hardness gumminess, and chewiness, while Hunter colorimetric parameters appeared with the saddle points. The result indicated that level of the saltwort deviating more or less from the optimal amount decreased the volume and increased the specific gravity with less tender product. Ordinary points of the surface responses of the sensory evaluation scores from the cake formed the maximum points for appearance, flavor, softness, and overall acceptability, while color values appeared with the saddle points. The result also indicated that the level of the saltwort deviating more or less from the optimal amount reduced the preference for the product. Integration of the optimum responses common to all dependent variables that overlapped all the contour maps finally indicated that the combination of 8.3${\sim}$13.8 g saltwort, 2.5${\sim}$6.6 g salt, and 486.5${\sim}$511.5 g wheat flour under the selected preparation recipe optimized the physical and sensory properties in the teamed foam cakes. Practical preparation of the product with median amounts of the ingredients, i.e., 11.0 g saltwort, 4.6 g salt, and 499.0 g wheat flour resulted in similar qualities to the predicted responses. In conclusion, these study results indicated that preparation of steamed foam cake with added saltwort ingredient could potentially produce a more nutritious product with less salt. Further research is required to acquire the optimum levels for sub-ingredients to improve the product quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.328-335
• /
• 2008

The system performance of NRZ format in WDM transmission system with lumped dispersion management(DM) and optical phase conjugator(OPC) is compared with that of RZ format. It is confirmed that eye opening penalty(EOP) of both NRZ and RZ format in WDM transmission system having lumped DM combined with OPC are greatly improved than those in WDM system with only OPC. The optimal net residual dispersion(NRD) in the case of RZ format is decided to so small value that path-averaged dispersion coefficient become almost zero, while that in the case of NRZ format is decided to larger value, for the best improvement of overall WDM channels. It is also confirmed that EOP in the case of RZ format is more improved than that in the case of NRZ format in lumped DM with optimal NRD. This is resulted from that lumped DM combined with OPC suppress the signal distortion due to intrachannel four-wave mixing(IFWM) and intrachannel cross phase modulation(IXPM). Consequently, lumped DM combined with OPC proposed in this paper is effective technique to mitigate intrachannel nonlinearities in WDM transmitting RZ format.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1155-1166
• /
• 2021

In this study, statistical analysis was performed to suggest the optimal analysis techniques for the main measuring instruments of the fill dam, such as seepage, crest settlement, and porewater pressure gauge. In addition, correlation analysis with water level and rainfall data was performed. Based on the results of descriptive statistical analysis for each instrument, porewater pressure gauges could be classified into 3 groups or 2 groups through principal component analysis, In the case of the group having a high correlation with the water level instrument, the correlation between the gauges was also large. In the case of seepage instrument, the distribution showed an extremely asymmetric distribution, so for quantitative analysis, the average seepage during non-precipitation and precipitation could be estimated through decision tree analysis. In the case of the crest settlement instrument, the correlation analysis showed that the correlation between the gauges was large, but the relationship with the water level instrument did not show a significant linear relationship, so EMD analysis was performed to analyze it in more detail. It is judged that principal component analysis, decision tree analysis, and data filtering method can be applied to analyze the behavior of pore water pressure meters, seepage, and crest settlement instrument as major measurement items of fill dam.