• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2131-2134
• /
• 2010

In this paper, the on-line system schemes for coordinated control system of multiple FACTS were presented to enhance the voltage stability around the metropolitan areas. In order to coordinated control system of FACTS devices, MFC on-line system calculates the optimal set point(Vref, Qrev) of FACTS devices using the coordinated control algorithm with real time network data which is transferred from SCADA/EMS system. If the system is unstable after contingencies, the new operation set-point of FACTS would be determined using bus sensitivity from tangent vector at voltage instability point. Otherwise, we would determine the new operation set-point of FACTS for considering economical operation, like as active power loss minimization using Optimal Power Flow algorithm. As the test, MFC(Multiple FACTS Coordinated control) on-line system will be installed in Korea power system.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.156-158
• /
• 2005

This paper presents an Optimal Power Flow (OPF) algorithm using Interior Point Method (IPM) to swiftly and precisely perform the five minute dispatch. This newly suggested methodology is based on Affine Sealing Interior Point Method (AS IPM), which is favorable for large-scale problems involving many constraints. It is also eligible for OPF problems in order to improve the calculation speed and the preciseness of its resultant solutions. Big-M Method is also used to improve the solution stability. Finally, this paper provides a relevant case study to confirm the efficiency of the proposed methodology.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.3
• /
• pp.47-56
• /
• 1999

제한된 출력 즉 오차 측정된 출력 값만을 사용하여 원하는 목표치에 도달하도록 하는 제어 문제를 푸는데 많은 연구가 진행되어 왔다. 종종 그러한 제어기를 설계할 때 해를 구하기 어려운 Non Linear Two Point Boundary Value Problem에 직면하게 된다. 특히 Reduced order 추정자 알고리즘은 백색 잡음에 의하여 영향을 받은 선형 시스템의 측정된 상태 뿐 만 아니라 보조 상태를 추정하기 위하여 개발되었다. 추정자를 설계할 때 상태는 무편향성이고 추정자의 편차는 추정자 및 추정상태와 공통되는 상태에 대한 모든 출력의 subspace에 수직이 된다. 특히 reduced order에서의 필터 성능은 full order에서의 필터 성능에 대해 suboptimal 이지만 상응한 Riccati equation을 푸는데 계산시간이 줄고 memory사용이 적은 이점이 있다. 본 논문에서는 Kronecker algebra와 선택행렬을 이용하여 Non Linear Two Point Boundary Value Problem을 Linear Two Point Boundary Value Problem으로 변환시켜 부수적으로 수반되는 대수적인 Riccati equation을 유도함으로써 문제를 쉽게 해결하는데 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.559-562
• /
• 1995

In the crane control system, it is reguired that the travelling time of the crane must be reduced as much as possible and the swing must be stoped at the end point. In paper, we present a hybrid control method which include the optimal regulator and velocity pattern controller in order to make high performance of the anti-sway. To implement the control algorithm, the dynamic equation is linearlized at an equilibrium point, so that the liner time invariant state equation can be obtained. In order to experiment the crane control, we consider 1 over 10 of the gantry crane which is used in a port. As a result, the hybrid control method improve efficient anti-sway control more than conventional velocity pattern control. It is expected that the proposed system will make an important contribution to the industrial fields.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.04a
• /
• pp.366-370
• /
• 1998

One major limitation of the efficiency of parallel computer designs has been the prohibitively high cost of parallel communication between processors and memories. Linear order concentrators can be used to build theoretically optimal interconnection schemes. Current designs call for building superconcentrators from concentrators, then using these to recursively partition the connection streams O(log2N) times to achieve point-to-point routing. Since the superconcentrators each have O(N) hardware complexity but O(log2N) depth, the resulting networks are optimal in hardware, but they are of O(log2N) depth. This pepth is not better than the O(log2N) depth Bitonic sorting networks, which can be implemented on the O(N) shuffle-exchange network with message passing. This paper introduces a new method of constructing networks using linear order concentrators and expanders, which can be used to build interconnection networks with O(log2N) depth as well as O(Nlog2N) hardware cost. (All logarithms are in base 2 throughout paper)

• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.73-78
• /
• 2004

This paper proposes a framework for determining the minimum load shedding for restoring solvability. The framework includes a continuation power flow (CPF) and an optimal power flow (OPF). The CPF parameterizes a specified outage from a set of multiple contingencies causing unsolvable cases, and it traces the path of solutions with respect to the parameter variation. At the nose point of the path, sensitivity analysis is performed in order to achieve the most effective control location for load shedding. Using the control location information, the OPF for locating the minimum load shedding is executed in order to restore power flow solvability. It is highlighted that the framework systematically determines control locations and the proper amount of load shedding. In a numerical simulation, an illustrative example of the proposed framework is shown by applying it to the New England 39 bus system.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.349-357
• /
• 2002

This research is basically deals with an inventory distribution system with several regional sales branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2002

This research is basically deals with an inventory distribution system with several regional sides branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.236-247
• /
• 1992

Optimization has been developed to minimize the cost function while satisfying constraints. Nonlinear Programming method is used as a tool for the optimization. Usually, cost and constraint function calculations are required in the engineering applications, but those calculations are extremely expensive. Especially, the function and sensitivity analyses cause a bottleneck in structural optimization which utilizes the Finite Element Method. Also, when the functions are quite noisy, the informations do not carry out proper role in the optimization process. An algorithm called "Second-order Approximation Method" has been proposed to overcome the difficulties recently. The cost and constraint functions are approximated by the second-order Taylor series expansion on a nominal points in the algorithm. An optimal design problem is defined with the approximated functions and the approximated problem is solved by a nonlinear programming numerical algorithm. The solution is included in a candidate point set which is evaluated for a new nominal point. Since the functions are approximated only by the function values, sensitivity informations are not needed. One-dimensional line search is unnecessary due to the fact that the nonlinear algorithm handles the approximated functions. In this research, the method is analyzed and the performance is evaluated. Several mathematical problems are created and some standard engineering problems are selected for the evaluation. Through numerical results, applicabilities of the algorithm to large scale and complex problems are presented.presented.

• KIEAE Journal
• /
• v.13 no.1
• /
• pp.159-165
• /
• 2013

Recently buildings are being constructed on the downtown area. In most building construction sites on the downtown area, the need for adequate material inventories are critical in order to avoid project delays and cost increases due to inappropriate deliveries of key materials. However immoderate material inventories cause increasing inventory cost. Therefore, we need a proper management material inventories. This research re-establishes the existing safety stock and analyzes relationship between safety stock and service level. It suggests an economical re-order point based on safety stock considering service level, various demand and delivery time.