• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.67-73
• /
• 2015

PURPOSES : This study was conducted to derive the optimum mixing ratio of phosphorescent pigment for the development of phosphorescent line marking. METHODS: In this study, we utilized a literature review and case study methodology, to describe the domestic and foreign state of practice for the production and mixing of phosphorescent pigment for use in line marking. The optimal mixing ratio was derived by comparing the reduction in luminance over time for the various phosphorescent pigment mixing ratios identified in the literature. In addition, performance and construction characteristics were analyzed using field testing techniques. RESULTS : The results were as follows: 1) the results of the luminance performance standards tests showed that all of the phosphorescence test specimens satisfied the phosphorescent fire protection standard. As the phosphorescent pigment mixing ratio increased, the luminance value increased, 2) the luminance reduction rate was minimum at the mixing ratio of 50%. However, when compared to a mixing ratio 40%, a small difference was recorded, the luminance reduction rate from the mixing ratio of 40% is judged as being converged. Therefore, in view of the economic efficiency, it was determined that the optimal mixing ratio was 40%, 3) as a result of construction on the field, a mixing ratio of 40% was found to have a higher luminance value than the general line marking for up to three hours after sunset, 4) it was found that the phosphorescent line markings without glass beads spraying had a higher luminance value than the phosphorescent line markings with glass beads spraying. CONCLUSIONS : Through the results of the basic experiments of the line markings obtained by blending a phosphorescent pigment, the results could be applied to play an important role in the development of phosphorescent line marking paint technology and in establishing application planning for on-site construction characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1721-1723
• /
• 1997

In AC Plasma Display Panel(PDP), serious problems are low radiation brightness and very high discharge voltage. To solve these problems, it is necessary to obtain optimal frequency of drive waveform and optimal gas mixing ratio. This paper presents firing voltage and sustain voltage as frequency of waveform and gas mixing ratio, and proposes optimal frequency of drive waveform and optimal gas mixing ratio.

• 대한기계학회논문집B
• /
• 제22권1호
• /
• pp.25-33
• /
• 1998

An experimental study has been carried out to obtain optimal conditions for turbulent mixing of two fluid streams at various angle branches by a flow visualization method. The main purpose of this study is the utilization of flow visualization method as a fast and efficient way to find the optimal mixing conditions when several flow control parameters are superimposed. It is verified that the optimal conditions estimated by flow visualization method have good agreement with the concentration field measurements. The results demonstrate that the diameter ratio is mainly attributed to the mixing phenomena than the branch pipe angle and the Reynolds number. The most striking fact is that there exists the best diameter ratio, d/D.ident. O.17, which requires the minimum momentum ratio in the range of the present experiment. The velocity ratio for the optimal mixing condition has a value within 2 to 16 according to the different flow parameters.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권4호
• /
• pp.152-158
• /
• 2007

본 연구는 알칼리 활성시멘트(Alkali Activated Cement)를 콘크리트에 활용하기 위한 기초적인 연구로서 잔골재 및 굵은골재의 혼합비는 일정하게 하고, 활성화제/플라이 애쉬의 혼합비, 그리고 활성화제 중 물유리, 수산화나트륨, 물의 혼합비를 변화시킨 AAC 콘크리트에 대한 압축강도를 측정하였다. 또한 각 변수에 따른 압축강도의 특성을 분석하고, AAC 콘크리트의 최적 혼합비를 구하였다. 그 결과 최대 압축강도 발현을 위한 활성화제 중 물유리, 수산화나트륨, 물의 최적 혼합비는 4.0:1.0:2.5 이었으며, 활성화제/플라이 애쉬의 최적 혼합비는 0.7 이었다.

• 한국조경학회지
• /
• 제38권5호
• /
• pp.93-101
• /
• 2010

탄성포장은 보행자의 만족감이 매우 높아 수요가 지속적으로 증가할 것으로 예상되나, 탄성포장의 재료 배합기준 즉, 합성고무 칩(EPDM chip)과 폴리우레탄 바인더의 적정배합기준이 미비하여 시공 시 많은 시행착오를 겪고 있는 실정이다. 따라서, 본 연구는 조경용 탄성포장의 폴리우레탄 바인더 배합비에 따른 결합력과 반발탄성의 변화를 실험을 통해 분석하고, 이를 바탕으로 적정한 재료배합 비율을 제시하고자 하였으며, 실험결과는 다음과 같다. 인장실험에서는 시료 B와 시료 C가 바인더 배합비율과 인장강도 간에 강한 양의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 인장강도가 증가한다는 것을 알 수 있다. 경도실험에서는 시료 A,시료 B,시료 C모두 바인더 배합비율과 경도 간에 통계적으로 상관관계가 없는 것으로 나타나, 탄성포장재의 경도는 바인더의 배합비율에 따라 달라지지는 않는 것으로 판단된다. 반발탄성실험에서는 시료 A와 시료 B가 배합비율과 반발탄성 간에 강한 음의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 반발탄성이 낮아진다는 것을 알 수 있다. 실험결과를 바탕으로 적정배합비율을 분석해 보면 인장강도의 경우, 인장강도의 증가가 둔화되거나 오히려 감소하는 배합비율 포인트는 20%이며, 반발탄성의 경우, 반발탄성이 급격하게 감소하는 배합비율 포인트는 22%이다. 따라서 두가지 요인을 감안할 때, 적정 배합비는 20~22% 사이로 판단된다. 본 연구의 결과는 조경용 탄성포장 시공 시 결합력과 탄성을 제고할 수 있는 재료배합의 지침을 제공할 수 있을 것으로 기대된다.

• 동아시아식생활학회지
• /
• 제18권1호
• /
• pp.29-40
• /
• 2008

The primary objective of this study was to determine the optimal mixing ratio in preparing Omi-Galsu concentrate. By varying the amounts of Omija extract, mung bean juice, and sugar in the concentrate mixture, we found that pH increased with greater amounts of Omija extract and sugar. According to sensory evaluations, sugar and total free sugar contents were highest when the mixing ratio was 1:1:20%(Omija extract, mung bean juice, and sugar respectively). This ratio also presented the most attractive color and highest overall acceptability.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.129-133
• /
• 2000

The objective of this study was to invetigate the coagulation effects of landfill leachate by using Acid Mine Drainage(AND). The coagulation efficiency was investigated by mixing landfill leachate with F $e^{+3}$ solution earned by oxidation of pyrite(AMD). In the results of this experiment, it was found that the amount of removed COD and SS was approximately 30% respectively by mixing at the ratio of AMD three to leachate one. And it showed highest turbidity removal efficiency at all mixing ratio. Concentration of Fe was decreased with increasing mixing ratio, however it was increased inversely at mixing ratio 4. Optimal mixing ratio was 3 at the results obtained by leachate coagulation experiments. Also removal efficiency at mixing ratio 3 corresponded to 500mg/$\ell$ of FeC $l_3$ dosage. it was suggested that pretreatment by mixing of AMD and leachate remove both suspended organic material of leachate and metal of AMD.

• Journal of Microbiology and Biotechnology
• /
• 제24권11호
• /
• pp.1542-1550
• /
• 2014

Co-digesting molasses wastewater and sewage sludge was evaluated for hydrogen production by response surface methodology (RSM). Batch experiments in accordance with various dilution ratios (40- to 5-fold) and waste mixing composition ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100, on a volume basis) were conducted. Volatile solid (VS) concentration strongly affected the hydrogen production rate and yield compared with the waste mixing ratio. The specific hydrogen production rate was predicted to be optimal when the VS concentration ranged from 10 to 12 g/l at all the mixing ratios of molasses wastewater and sewage sludge. A hydrogen yield of over 50 ml $H_2/gVS_{removed}$ was obtained from mixed waste of 10% sewage sludge and 10 g/l VS (about 10-fold dilution ratio). The optimal chemical oxygen demand/total nitrogen ratio for co-digesting molasses wastewater and sewage sludge was between 250 and 300 with a hydrogen yield above 20 ml $H_2/gVS_{removed}$.

• 한국지반환경공학회 논문집
• /
• 제25권6호
• /
• pp.5-12
• /
• 2024

현재 저수지 제체의 차수성 및 안전성 확보를 위해 약액을 저압으로 주입하여 제체 손상을 최소화하는 그라우팅 공법이 보편적으로 사용되고 있으나, 내구성 확보와 체계적인 고화재의 배합비 결정방법이 정립되어 있지 않은 문제들이 있다. 본 연구에서는 원지반과 고화재를 다양한 중량비율로 교반·혼합하였을 경우 혼합체의 투수계수와 강도를 실내시험을 통해 확인하였으며, 시험결과들의 분석을 통해 최적 배합비를 제안하였다. 실내실험을 위한 공시체는 고화재의 배합량을 고려하여 제작하였다. 투수시험용 공시체는 사질토와 점성토 별 고화재 배합량 1.5kN/m³에 대해 제작하였으며, 투수시험 결과 차수 성능이 확보되어 각종 설계기준을 만족하는 것을 확인하였다. 강도시험을 위한 공시체는 점성토의 경우 5가지, 사질토는 3가지 배합비로 각각 3개 총 24개의 시편을 제작하였으며, 시험 결과 사질토와 점성토 모두 배합량 2.0kN/m³ 이하에서는 일축압축강도가 재령일이 증가함에 따라 선형적으로 증가하는 경향을 나타냈다. 따라서 현장에 적용되는 최적의 배합비는 고화재 배합량을 1.5kN/m³ 및 2.0kN/m³으로 결정하였다. 또한 현재 운영 중인 노후 저수지 개보수사업 설계사례를 대상으로 실험성과를 반영한 수치해석을 실시한 결과 저수지 제체의 차수 및 안전성 증대 효과를 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.154-155
• /
• 2017

With the recent development in construction industry, industrial by-products fly ash(FA) and blast furnace slag(BS) have been used in large quantities as an alternative to cement, as a solution for environmental problems and resource exhaustion. This study analyzed the basic characteristics according to the changes in replacement ratio and mixing ratio of FA and BS in high strength SCMs concrete, from which in turn it sought to find the optimal mixing ratio for high strength concrete The results showed that in unhardened concrete the more the replacement ratio and FA mixing ratio increases the slump flow will increase while amount of air decreases, and setting time is delayed. In hardened concrete the more the replacement ratio and FA mixing ratio increases the more the overall compression strength decreases, but until 28 days of material age the larger of the BS ratio displayed the best compression strength.