• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.242-247
• /
• 2012

In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1231-1238
• /
• 1999

This paper presents an approach for the optimal heating load Identification using Diagonal Recurrent Neural Networks(DRNN). In this paper, the DRNN captures the dynamic nature of a system and since it is not fully connected, training is much faster than a fully connected recurrent neural network. The architecture of DRNN is a modified model of the fully connected recurrent neural network with one hidden layer. The hidden layer is comprised of self-recurrent neurons, each feeding its output only into itself. In this study, A dynamic backpropagation (DBP) with delta-bar-delta learning method is used to train an optimal heating load identifier. Delta-bar-delta learning method is an empirical method to adapt the learning rate gradually during the training period in order to improve accuracy in a short time. The simulation results based on experimental data show that the proposed model is superior to the other methods in most cases, in regard of not only learning speed but also identification accuracy.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.5-11
• /
• 2002

Active vibration control of intelligent laminated composite plates is performed experimental1y Laminated composite place is modeled by the system identification method. For the system identification process, the laminated composite place is excited by two piezoelectric actuators with PRBS signals. At the same time, the displacement of the laminated composite plate is measured by a gap sensor. From these excited PRBS signals and the measured displacement sequence, system parameters of the laminated composite plate are estimated using a recursive prediction error method. Model of the laminated composite plate with two piezoeletric actuators is assumed to be the form of ARMAX. From the estimated ARHMAX model, a state space equation of the observable canonical form is obtained. With this state space equation, a controller and an observer for active vibration control is designed using the optimal control method. Controller and observer are implemented on a digital system. Experiments on the vibration control are Performed with changing the outer layer fiber orientation of intelligent composite plates.

• 한국통신학회논문지
• /
• 제37권1C호
• /
• pp.38-44
• /
• 2012

In this paper, we first formulate an optimal design problem for RFID tag identification processes and then propose a simplified estimation method for determining optimal frame sizes and termination time under an independence assumption. Through computer simulations we show that the proposed scheme outperforms Vogt's scheme in terms of identification delay.

• 대한수학회지
• /
• 제46권5호
• /
• pp.1105-1117
• /
• 2009

In this paper a parameter identification problem for a damped sine-Gordon equation is studied from the theoretical and numerical perspectives. A spectral method is developed for the solution of the state and the adjoint equations. The Powell's minimization method is used for the numerical parameter identification. The necessary conditions for the optimization problem are shown to yield the bang-bang control law. Numerical results are discussed and the applicability of the necessary conditions is examined.

• 제어로봇시스템학회논문지
• /
• 제2권1호
• /
• pp.21-25
• /
• 1996

In this paper we suggest a general purpose RNN training algorithm which is derived on the optimal control concepts and variational methods. First, learning is regared as an optimal control problem, then using the variational methods we obtain optimal weights which are given by a two-point boundary-value problem. Finally, the modified gradient descent algorithm is applied to RNN for on-line training. This algorithm is intended to be used on learning complex dynamic mappings between time varing I/O data. It is useful for nonlinear control, identification, and signal processing application of RNN because its storage requirement is not high and on-line learning is possible. Simulation results for a nonlinear plant identification are illustrated.

• 대한수학회지
• /
• 제41권3호
• /
• pp.435-459
• /
• 2004

Identification problems for the system governed by abstract nonlinear damped second order evolution equations are studied. Since unknown parameters are included in the diffusion operator, we can not simply identify them by using the usual optimal control theories. In this paper we present how to solve our identification problems via the method of transposition.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.701-706
• /
• 1998

A design method of rule -based fuzzy modeling is presented for the model identification of complex and nonlinear systems. The proposed rule-based fuzzy modeling implements system structure and parameter identification in the efficient form of " IF..., THEN,," statements. using the theories of optimization and linguistic fuzzy implication rules. The improved complex method, which is a powerful auto-tuning algorithm, is used for tuning of parameters of the premise membership functions in consideration of the overall structure of fuzzy rules. The optimized objective function, including the weighting factors, is auto-tuned for better performance of fuzzy model using training data and testing data. According to the adjustment of each weighting factor of training and testing data, we can construct the optimal fuzzy model from the objective function. The least square method is utilized for the identification of optimum consequence parameters. Gas furance and a sewage treatment proce s are used to evaluate the performance of the proposed rule-based fuzzy modeling.

• 한국지능시스템학회논문지
• /
• 제7권4호
• /
• pp.82-92
• /
• 1997

본 논문에서는, 퍼지 측도와 퍼지 적분을 이용한 상호 작용 시스템의 모델 및 이의 식별볍을 제시한다. 모델 식별은 다음과 같은 세 단계를 거쳐 이루어 지는데, 그 첫번째는 모델의 구조 식별이고 두번째는 식별된 구조를 갖는 모델의 파라메터 식별이다. 그리고 마지막으로는 식별된 구조와 파라메터를 갖는 모델의 최적성을 판단하여, 최적의 모델을 선정하게 된다. 본 논문에서는 최적 모델의 식별을 위하여 유전자 알고리즘 및 통계적 모델 선택 기준을 이용하여, 최적 모델들의 후보군으로부터 최적모델을 선정하는 알고리즘을 제시한다. 본 논문에서 제시된 모델 및 이의 식별법의 타당성을 보이기 위하여, 주관적 평가 데이타 및 시계열 데이타에 적용하여 그 결과를 나타내었으며, 또한 기존의 다른 모델들로부터 얻어진 결과와 비교 검토하였다.

• Smart Structures and Systems
• /
• 제17권3호
• /
• pp.523-539
• /
• 2016

The ambient vibration measurement is an output-data-only dynamic testing where natural excitations are represented, for instance, by winds and typhoons. The modal identification involving output-only measurements requires the use of specific modal identification techniques. This paper presents the application of a reliable method (the Stochastic Subspace Identification - SSI) implemented in a general purpose software. As a criterion toward the robustness of identified modes, a bio-inspired optimization algorithm, with a highly nonlinear objective function, is introduced in order to find the optimal deployment of a reduced number of sensors across a large civil engineering structure for the validation of its modal identification. The Ting Kau Bridge (TKB), one of the longest cable-stayed bridges situated in Hong Kong, is chosen as a case study. The results show that the proposed method catches eigenvalues and eigenvectors even for a reduced number of sensors, without any significant loss of accuracy.