• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.109-115
• /
• 2008

The cleaning process of contaminant particles adhering to the microchips, integrated circuits (ICs) or the like is essential in modern microelectronics industry. In the cleaning process particularly working with the application of inert gases, the removal of contaminant particles of submicron scale is very difficult because the particles are prone to reside inside the boundary layer of the working fluid, The use of cryogenic $CO_2$ cleaning method is increasing rapidly as an alternative to solve this problem. In contrast to the merits of high efficiency of this process in the removal of minute particles compared to the others, even fundamental parametric studies for the optimal process design in this cleaning process are hardly done up to date, In this study, we attempted to measure the cleaning efficiency with the variations of some principal parameters such as mass flow rate, injection distance and angle, and tried to draw out optimal cleaning conditions by measuring and evaluating an effective cleaning width called $d_{50}$.

• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.13-19
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.927-928
• /
• 2008

• 지질공학
• /
• 제31권1호
• /
• pp.19-30
• /
• 2021

본연구에서는 가뭄이 빈번히 발생하는 지류 상류 지역에서 농번기에 부족한 물을 확보하기 위하여 평상시 잉여의 물을 지하 대수층에 주입하는 인공함양 방식을 설계함에 앞서 적정 주입량 및 주입효율을 수치모델을 활용하여 평가하고자 하였다. 인공함양 수치모델 대상지역은 홍성군 갈산면 운곡리 일대를 대상으로 하였으며 다양한 공당 주입량 조건과 대수층의 수리적 특성을 고려하여 모델링을 수행한 결과, 연구지역의 공당 적정주입량은 50.0 ㎥/day/공로 평가되었으며 주입효율은 총 주입용량 대비 33.2~81.2%로 예측되었다. 특히, 주입효율은 주입시간이 짧을수록 비선형으로 증가하는 양상을 보였으며 잔류 저류용량은 총 주입용량이 많을수록 증가하여 물부족 시 사용 가능량이 많아지므로 보다 유리할 것으로 보였다. 향후 보다 정확한 함양효율 평가를 위해 현장 실증시험 결과를 활용하여 모델을 검증하고 이를 통해 주입 및 취수에 대한 적정 시나리오를 구축한다면 보다 효율적인 인공함양 시스템의 운영이 가능할 것이다.

• 한국연소학회지
• /
• 제13권2호
• /
• pp.7-13
• /
• 2008

The aim of this work is to identify application of ultra low NOx and CO combustor. To achieve this, we developed the premixed oxidizer-staging combustor using a cyclone flow. Various factors such as equivalence ratio for the combustion condition and swirl type for secondary air injection have been tested experimentally for flame stability and NOx, CO emission characteristics. Before to do this, we had been tested cyclone premixed combustor in advance. it is similar to first combustor of premixed oxidizer-staging combustor. As a result, cyclone premixed flame shows the very high flame stability and low NOx emission. however, it can be identified that there were some problems such as a little high CO emission and thermal resistance of combustor wall. Cyclone premixed oxidizer-staging combustor can resolve those of problems. In our combustor, we can found out optimal condition that the secondary air injection method is swirl type, swirl direction is co-swirl and equivalence ratio of first combustor is 1.3. Quantitatively, we can achieve 10.8 ppm for NOx and 30.2 ppm for CO emissions respectively. Form this result, we can identified that cyclone premixed oxidizer-staging combustor can apply to ultra low NOx and CO combustor.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.345-351
• /
• 2016

This study was carried out to determine an optimal lean $NO_x$ trap (LNT) regeneration condition based on a $NO_x$ storage fraction. The LNT regeneration was performed by an in-cylinder post fuel injection method. A $NO_x$ storage fraction is defined by the ratio of current cumulated $NO_x$ amount in the LNT to the $NO_x$ storage capacity: 0 means empty and 1 fully loaded. In this study five engine operating conditions were chosen to represent the New European Driving Cycle. With various $NO_x$ storage fractions each engine operating condition, the LNT regeneration was executed and then $NO_x$ conversion efficiency, additional fuel consumption, CO and THC slip, peak catalyst temperature were measured. The results showed that there exist an optimal condition to regenerate the LNT, eg. 1500 rpm 6 bar BMEP with below 0.7 $NO_x$ storage fraction in this experimental constraint.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.169-172
• /
• 2020

In this paper, the effect of hot carrier injection on an n-bulk fin field-effect transistor (FinFET) is analyzed. The hot carrier injection method is applied to determine the performance change after injection in two ways, channel hot electron (CHE) and drain avalanche hot carrier (DAHC), which have the greatest effect at room temperature. The optimum condition for CHE injection is V_G=V_D, and the optimal condition for DAHC injection can be indirectly confirmed by measuring the peak value of the substrate current. Deterioration by DAHC injection affects not only hot electrons formed by impact ionization, but also hot holes, which has a greater impact on reliability than CHE. Further, we test the amount of drain voltage that can be withstood, and extracted the lifetime of the device. Under CHE injection conditions, the drain voltage was able to maintain a lifetime of more than 10 years at a maximum of 1.25 V, while DAHC was able to achieve a lifetime exceeding 10 years at a 1.05-V drain voltage, which is 0.2 V lower than that of CHE injection conditions.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.323-328
• /
• 2006

본 논문의 목적은 부채꼴방전(GlidArc) 플라즈마 개질을 이용하여 프로판으로부터 카본블랙의 형성이 없는 합성가스 생산을 위한 개질특성과 최적 운전조건을 연구하였다. 또한 수소 생산 및 프로판 전환율을 항상시키기 위해 반응기 내의 촉매반응 영역에 13 wt%의 니켈촉매를 충진하여 수증기 몰 비, 이산화탄소 몰 비, 입력 전력, 주입 유량 변화의 변수별 연구를 수행하였다. 그 결과, 수증기 몰 비, 이산화탄소 몰 비, 입력 전력, 주입 유량이 각각 1.86, 0.48, 1.37 kW, 14 L/min일 때 프로판 전환율이 62.6%로 최적이었다. 위의 조건에서 합성가스의 건가스 기준에 농도는 $H_2\;44.4%,\;CO\;18.2%,\;CH_4\;11.2%,\;C_2H_2\;2.0%,\;C_3H_6\;1.6%,\;C_2H_4\;0.6%,\;C_3H_4$ 0.4%이며, 이산화탄소 전환율은 29.2%, 합성가스 내의 $H_2/CO$ 농도 비는 2.4이다.

• 한국수정란이식학회지
• /
• 제8권2호
• /
• pp.151-157
• /
• 1993

The present study was undertaken to determine the optimal condition for parthenogenetic activation of rabbit oocytes by electric stimulation in vitro in an attempt to develop nuclear transplantation techniques for cloning mammalian embryos and animals. Freshly ovulated oocytes were collected from superovulated rabbits from 13 to 26 hrs. after hCG injection. The cumulus-free oocytes were activated parthenogetically by repeated stimuli of square direct electric pulses in O.3M mannitol solution. After applying electric stimulations of different voltages, pulse durations and pulse times, all of the oocytes were cultured in TCM-199 with 10% FCS for 96 hours in a 5% $CO_2$ incubator, and their developmental potential in vitro was examined. The higher activation rate (68.9%) was achieved at the voltage of 2.0kv/cm, the pulse duration of 60 $\mu$sec and three pulse times and the activation rate of 100% was achieved at the pulse duration of 100 and 200 $\mu$sec, the voltage of 1.5kv/cm and three pulse times. Although the higher rates of activation of oocytes were achieved at 100 and 200 $\mu$sec, none of them developed to blastocyst in vitro. The oocytes collected 18~20 hours post hCG injection showed the highest rate of activation and development to blastocyst in vitro than the oocytes collected 13~15 or 25~26 hours post hCG injection. Therefore, it can be suggested that the application of electric stimulation of 2.0kv/cm, 60 $\mu$sec and three pulse times to the oocytes collected at 18~20 hours post hCG injection would be more beneficial for the parthenogenetic activation of oocytes in rabbits.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권6호
• /
• pp.80-90
• /
• 2014

The laboratory and field studies were conducted to identify an optimal injection concentration of nanoscale zero-valent iron particles (NZVI) and to evaluate the applicability of NZVI-based reactive zone technology to the site contaminated with trichloroethylene (TCE) DNAPL (Dense Non-Aqueous Phase Liquid). The laboratory test found an optimal injection concentration of NZVI of 5 g/L that could remove more than 95% of 0.15 mM TCE within 20 days. Eleven test wells were installed at the aquifer that was mainly composed of alluvial and weathered soils at a strong oxic condition with dissolved oxygen concentration of 3.50 mg/L and oxidation-reduction potential of 301 mV. NZVI of total 30 kg were successfully injected using a centrifugal pump. After 60 days from the NZVI injection, 86.2% of the TCE initially present in the groundwater was removed and the mass of TCE removed was 405 g. Nonchlorinated products such as ethane and ethene were detected in the groundwater samples. Based on the increased chloride ion concentration at the site, the mass of TCE removed was estimated to be 1.52 kg. This implied the presence of DNAPL TCE which contributed to a higher estimate of TCE removal than that based on the TCE concentration change.