• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.340-346
• /
• 1994

2.5Gbps 광통신시스템용 수광소자로서 charge plate층을 갖는 링구조의 separate absorption grading multiplication avalanche photodiode를 제작하고 그 특성을 조사 분석하였다. Avalanche Photodiode의 제작은 Metal-Organic Chemical Vapor Deposition 과 Liquid Phase Epitaxy법을 이용한 에피성장과 Br:Methanol을 이용한 채널식각 방법을 사용하였고, passivation과 평탄화는 photosensitive polyimide를 이용하였다. 제작된 ADP는 10nA 이하의 작은 누설전류를 나타내었고, -38~39 V의 항복전압을 나타내었다. 제작된 ADP를 GaAs FET hybrid 전치증폭기와 결합하여 2.5Gbps 속도에서 $2^{23}-1$의 길이를 갖는 입력 광신호에 대해 $ 10^{-10}$ Bit Error Rate에서 -31.0dBm의 수신감도를 얻었다.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.418-422
• /
• 1994

본 연구에서는 MOVPE를 이용한 MQW활성층을 DFB-LD 구조에 도입함으로서 2.5Gbps 광전송용 광원으로 사용된 $ 1.55.\mu$m 파장의 MQW-PBH-DFB-LD를 제작하였다. 활성층으로는 MOVPE를 이용하여 8쌍의 InGaAs/InGaAsP MQW층을 성장하였으며 2차 및 3차 결정성장은 LPE를 사용하였고 발진파장을 결정하는 회절격자 주기는 238nm로 하였다. MQW-PBH-DFB-LD의 평균 임계전류는 13.81mA, Slope efficiency는 0.137mW/mA이었고 발진파장은 1548.6nm의 특성을 얻었다. 그리고 2.5Gbps 대신호 변조시의 chirping특성을 조사하여 본 결과 0.55nm임을 확인할 수가 있었다.

• Korean Journal of Optics and Photonics
• /
• v.5 no.4
• /
• pp.493-498
• /
• 1994

A fiber-optic matched filter with Cr/ Au film-deposited fiber-optic delay lines is fabricated for a possible application as photonic packet address detectors for an all-optical slotted ring network. Correlation waveforms for a set of 6-bit address codes with 2.5 Gb/s are produced by simulation. It is shown that the measured correlation outputs agree well with the calculated ones.d ones.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.129-130
• /
• 2009

In order to determine the aberration coefficients of an aspheric lens with a small diameter, its transmitted wavefront was compensated with a null CGH and an auxiliary convex lens. The configuration of the measuring system and the fabrication step of CGHs could be simplified by using a reflective amplitude-type CGH as null optics. The compensated waterfronts of several sample lenses were measured and analyzed, and consequently the performance of the CGH was evaluated.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.118-122
• /
• 2009

An optical sheet with microlens array (MLA) is designed and fabricated as a substitute for the prism sheets of LCD backlight. Using photoresist thermal reflow, MLAs were fabricated on PET film with thickness of $100{\mu}m$, and we measured the change of MLA profile in terms of exposure time, reflow temperature and reflow time.

• Current Optics and Photonics
• /
• v.1 no.6
• /
• pp.567-572
• /
• 2017

A novel slotted-core hexagonal photonic crystal fiber (PCF) for terahertz (THz) wave guiding is proposed in this paper. A trade-off managed between effective material loss (EML) and birefringence for efficient guidance of THz waves is illustrated in this article. The rectangular slot shaped air-holes break the symmetry of the porous-core which offers ultra-high birefringence of $8.8{\times}10^{-2}$. The proposed structure offers low bending loss of $1.07{\times}10^{-34}cm^{-1}$ and extremely low effective material loss (EML) of $0.035cm^{-1}$ at an operating frequency of 1.0 THz. In addition other guiding properties such as power fraction, dispersion and confinement loss are also discussed. The proposed THz waveguide can be effectively used for convenient transmission of THz waves.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.92-100
• /
• 1992

A Spectroscopic Ellipsorneter(SE) is fabricated. The PSA configuration of the rotating analyzer type where the effects of the imperfect optical elements can be minimized is adopted. The straight through operation shows that the standard deviations of tan$\psi$ and cos$\Delta$ are less than 0.2% in the spectral range of 300nm-850nm. From the film data of ellipsometric spectra the bulk dispersion relation of a few fluorides and the void distribution inside the fluoride thin films are obtained.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.119-122
• /
• 2000

We proposed a novel mode shape converter (MSC) that can effectively reduce the coupling loss between polymer rib waveguide and single mode fiber. The double-nb geometry that was used in the novel MSC converted an elliptical mode to circular mode and an circular mode to elliptical mode. This structure can be easily realized by using the typical fabrication process for polymer wavegUide. Simulation using a three dimensional beam propagation method showed that the novel MSC has a coupling loss of 0.079 dB/facet and total lllsertioll loss of less than 0.2 dB. .2 dB.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.19-25
• /
• 1997

Holographic zone plate (HZP) is fabricated by interfering a plane wave and a spherical wave in a dichromated gelatin (DCG) film obtained from Agfa 8E75HD plates. We have developed a simple theory for HZP considering optical nonlinearity of DCG material. Analysis of our theory for HZP shows that it has infinite focal points at distances f,f/2, f/3,,…. In experiment, we observed the corresponding focal points of up to f/6 when illuminating HZP by a plane wave. It is also shown that the beam profile around the first focal point measured by using a knife-edge scanning method has a Gaussian shape.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.42-46
• /
• 1997

In order to acquire the fluorescence burst signals emitted from single dye molecules that pass through a detection space defined by a confocal microscope, a computer-interfaced photon counter has been fabricated. The maximum count rate is about 80 MHz, which is limited by the counter devices used. Using both the operating computer program written by BASIC and the 486 PC computer, the minimum bin-width of 25 $mutextrm{s}$ has been achieved. The characteristics of fluorescence burst signals emitted from JA22 molecules at about 1$\times$$10^{-11}$m mol/L in ethylene glycol are discussed briefly.