• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.67-79
• /
• 1997

We have designed the quasi optics of the dual channel receiver to observe the radio sources with 100GHz-band and 150GHz-band simultaneously. We introduced the general quasi optics and the relation between the Gaussian beam and thin lens approximation. We determined the parameters of the quasi optic components to match the beam waist at cassegrain focus with that of feed horn well.

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.311-318
• /
• 2009

We present an attractive real time in-vivo endoscopic microscope with a resolution of submicron, in which two kinds of optical correcting plates are inserted to eliminate higher order spherical aberration and field curvature. And, since the conventional objective lens is replaced to GRIN lenses with diameter of 1 mm, the above endoscopic microscope can be effectively utilized to invade minimally for live animals.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.392-398
• /
• 2013

As the essential techniques for the CD (Critical Dimension) measurement of the LCD pattern, there are various modules such as an optics design, auto-focus [1-4], and precise edge detection. Since the operation of image enhancement to improve the CD measurement repeatability, a ring type of the reflected lighting optics is devised. It has a simpler structure than the transmission light optics, but it delivers the same output. The edge detection is the most essential function of the CD measurements. The CD measurement is a vital inspection for LCDs [5-6] and semiconductors [7-8] to improve the production yield rate, there are numbers of techniques to measure the CD. So in this study, a new subpixel algorithm is developed through facet modeling, which complements the previous sub-pixel edge detection algorithm. Currently this CD measurement system is being used in LCD manufacturing systems for repeatability of less than 30 nm.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.186-190
• /
• 2006

The use of null optics is proposed as a new concept for the precise alignment of a confocal unstable resonator. The characteristics of the proposed null optics are investigated and analysed with the designed null lens for a real confocal unstable resonator of which the length is 3.5 m. As a result of the analysis, the pupil map data are shown about the despace error of 1.0 mm and tilt error of 1.0 mrad.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.635-642
• /
• 2010

The paper presents a multimedia educational program of DC servo drives for distant learning with a special emphasis on sliding mode control. The program contains of three parts: animation, simulation and internet based measurement. The animation program explains the operation of DC motors, gives its time- and frequency-domain equations, transfer functions and the theoretical background necessary for controller design for DC servo motors. The simulation model of the DC servo motor and the controller can be designed by the students based on the animation program. The students can also test their controllers through the internet based measurement, which is the most important part from engineering point of view. After the measurements are executed, the students can download the measured data and compare them to the simulation results.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.73-80
• /
• 2013

In the process of lithography using ultra violet light sources for semiconductor devices, most of defects are made by sub-micrometer pollutants generated at photochemical reactions. We proposed and developed a novel vibration-insensitive on-axis interferometer with a sub-micrometer lateral resolution by using the interference between two beams: one scattered from defects and the other reflected from a reference area without defects. The proposed system was successfully demonstrated to detect a small Al defect of 0.5 ${\mu}m$ diameter within the inspection time of less than 30 minutes over the area of the photo-mask which is 6 inch by 6 inch square.

• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.329-335
• /
• 2019

Wide FOV imaging systems are important for acquiring rich visual information. A conventional catadioptric imaging system deploys a camera in front of a curved mirror to acquire a wide FOV image. This is a cumbersome setup and causes unnecessary occlusions in the acquired image. In order to reduce both the burden of the camera deployment and the occlusions in the images, this study uses a secondary planar mirror in the catadioptric imaging system. A compact design of the catadioptric imaging system and a condition for the position of the secondary planar mirror to satisfy the central imaging are presented. The image acquisition model of the catadioptric imaging system with a secondary planar mirror is discussed based on the principles of geometric optics in this study. As a backward mapping, the acquired image is restored to a distortion-free image in the experiments.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.215-219
• /
• 2019

Chromatic aberrations induced by Risley prisms made of a single material can be substantially compensated using a liquid crystal spatial light modulator while still keeping the prism pairs compact, simple and lightweight. A ${\pm}10^{\circ}$ optical scanning imaging system with ${\pm}2^{\circ}$instantaneous field based on LC-SLM correction is designed as an example. The ultimate simulation results show that this kind of scheme is an effective way of improving imaging performance dynamically across the full field of scanning.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.53.3-53.3
• /
• 2021

Adaptive Optics (AO) was first studied in the field of astronomy, and its applications have been extended to the field of laser, microscopy, bio, medical, and free space laser communication. AO modelling and simulation are required throughout the system development process. It is necessary not only for proper design but also for performance verification after the final system is built. In KASI, we are trying to develop the AO Python Package for AO modelling and simulation. It includes modelling classes of atmosphere, telescope, Shack-Hartmann wavefront sensor, deformable mirror, which are the components for an AO system. It also includes the ability to simulate the entire AO system over time. It is being developed in the Super Eye Bridge project to develop a segmented mirror, an adaptive optics, and an emersion grating spectrograph, which are future telescope technologies. And it is planned to be used as a performance analysis system for several telescope projects in Korea.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.123-128
• /
• 2002

This study is to develop optical lining device for vacuum binding of PDP and FED. It is very difficult precise technology to line a front board and back board accurately and fast every time when two boards are joined together. Especially, these technology is difficult to be transferred from developed countries. In this study, the accuracy of lining of two boards in vacuum device by developing an optical lining device for vacuum binding as an image processor and CCD camera configured to be high magnification lens with long focus using optical design.