• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.95-97
• /
• 1999

It is becoming demand of OPGW required high reliability of the characteristics of earthing and tight transmission. This paper study the mechanical and electrical characteristics of the OPGW stranded stainless tubes lied optical fiber and aluminum alloy wire to grasp their performance and to approach to design suitable for various environment.

• Journal of the Optical Society of Korea
• /
• v.14 no.2
• /
• pp.127-130
• /
• 2010

We have developed an efficient electron beam (e-beam) source, a microcolumn, that can be used as a source module for of microscopy and its applications. To obtain a low operating voltage, a very sharp cold field electron emitter was developed by electrochemically etching a tungsten wire. Laser diffraction was used for the fabrication of high-quality electron lenses and for their precise alignment. The measurement of the e-beam currents, and SEM images captured by the microcolumn confirmed the potential of the device as a very good e-beam source.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.67-72
• /
• 1992

This paper presents the process of manufacturing technology of ceramics ferrule for opitcal fiber connector. Precision zirconia ceramic ferrules is widely for high performance and low cost single mode optical fiber connectors. To polish the hole of the zirconia ceramic ferrule, the wire lapping instrument is developed and the machining experiment is conducted. Through the centerless grinding using diamond wheel the surface roughness of zirconia ceramics ferrule is below the 1$\mu$m Rmax.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.264-265
• /
• 2000

1차원 반도체 구조인 양자 줄(Quantum Wire)은 새로운 물리 현상의 가능성을 보여줄 것으로 기대된다.$^{(1)(2)}$ 이 구조에서 운반자는 2차원 퍼텐셜에 가두어지므로 1차원 퍼텐셜인 양자 우물에 갇힌 운반자 보다 더 많이 양자화가 이루어져 이 운반자의 상태 에너지는 더 쪼개지며, 양자 줄의 상태 밀도는 에너지 준위에 대해 계단 함수가 아닌 변형된 Dirac $\delta$ 함수꼴을 가진다.$^{(3)}$ 그러나, 1차원 반도체 구조인 양자 줄이 나노(nano) 크기 내에서 만들어져야 하므로, 잘 정의된 양자 줄을 만드는 일은 기술상 매우 어려운 일이다. 양자 우물 구조에서 운반자는 결정을 키우는 방향을 따라 나노 크기의 활성 영역 안에 가두어지게 된다. 양자 줄 구조에서의 운반자는 결정 성장 방향뿐만 아니라 수직인 한 방향에서 각각 나노 크기를 갖는 활성 영역에 가두어져야 한다. 여기에서, 결정 성장 방향과 수직으로 활성 영역을 정의하는 것은, 결정 성장 방향과 평행하게 활성 영역을 정의하는 것보다 어려운 일이다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.792-798
• /
• 2012

This study shows the vibration characteristics of an actuator with six wire-suspensions, used in optical pickups of optical disc drives (ODDs). In this paper, the vibration characteristics of this beam structure is induced mathematically. To obtain vibration modes of focusing direction, the vibration analysis is achieved in lateral and longitudinal directions of the structure. The accuracy of induced vibration characteristics is proved by comparing mode frequencies with a finite element analysis. Finally, it is shown that mode shapes can be modified by changing design parameters in mathematical expressions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.11
• /
• pp.1128-1136
• /
• 2012

This paper analyzes the vibration characteristics of an optical pickup actuator, which has six wire-suspensions and is used in optical disc drives(ODDs). The vibration characteristics of the actuator is mathematically described by analyzing its beam configuration and motion condition confined to lateral and longitudinal directions of the beams. The accuracy of the vibration characteristics is proved by comparing mode frequencies with a finite element analysis. Finally, it is shown that mode frequencies and shapes can be modified by changing design parameters in mathematical expressions.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.33-38
• /
• 2007

This paper reports an attempt to develop 7-wire steel tendon which is instrumented with optical FBG sensors. The tendon is devised to replace the king cable, which is located in the center of the tendon, by a steel tube in which the FBG sensor are attached along the hole using a high-mobility polyester resin. The circular steel tube has typical of 5 mm outer diameter and 1 mm inner diameter, and can easily be manufactured by means of an pultrusion process. Using the tube, in this study, three different types of one meter-long smart tendons are fabricated depending on mixture ratio of polyester resin and initiator. The performance of the FBG sensors as well as mechanical characteristics of the prototype are tested through the tensile test. Test results shows that the proposed smart tendon is in principle very effective for measuring the working strain of the tendon.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.57-62
• /
• 2004

We report the fiber-optic current sensors composed of a side-polished single-mode fiber with the thermo-optic Polymer layer and the metal wire as a heater. The index change of polymer layers caused by the resistant heat of the metal wires induces the optical attenuation through the evanescent field of the side-polished single-mode fiber. Two types of the sensors are proposed and their characteristics as a current sensor are investigated.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.282-285
• /
• 2010

We printed a one-dimensional array of metallic wires and a two-dimensional array of metallic split ring resonators on a photo-paper by using a high-dots-per-inch resolution printer and an ink with silver nano-particles. The printed sample sizes are $1.0{\times}1.0cm^2$. The transmission measured by a terahertz time domain spectroscopy system shows that the arrays of wires and split ring resonators could act as polarizers and band-stop filters, respectively, in a terahertz frequency region.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.205-208
• /
• 2002

When establishing the submarine optical fiber table between international and domestic, marine survey in advance it grasps the submarine geological features which is accurate and a depth of water condition. And the route which is safe for selecting and submarine optical fiber cable laying it is a work which secures an ease one location. If also, the PLGR the submarine of optical fiber table root the sea contamination material (rope, wire and net) it removes in advance and if the submarine of the optical fiber cable ease it does to arrive safely. And it is a work the Plough and ROV laying work hour laying work efficiency improvement and laying equipment it will be able to protect. So, This paper presents the monitoring system of ship information management and operation for marine survey and PLGR work in submarine optical fiber table construction enterprise. In order to achieve these purpose, overall serial multi-port communication modulo of configuration, realtime processing for management and operation of receiving data, realtime graph and a printout are described.