• Title/Summary/Keyword: Optical transparency

Search Result 310, Processing Time 0.03 seconds

Optical Properties of Water (II) - Variation in the Coastal Sea Water Near Busan in Winter and Spring - (해수의 광학적 성질에 관한 연구 (II) - 부산근해의 하계 및 춘계 변화 -)

  • 양용림
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.12 no.1
    • /
    • pp.7-12
    • /
    • 1976
  • The optical properties of the sea water were studied by use of underwater photometers in the coastal waters of Busan, from December 1975 to May 1976. The absorption coefficient of the sea water in the area ranged from 0.223 to 0.901 and the mean was 0.355. Maximum valae of monthly mean was 0.454 in December, while the minium was 0.301 in January. The transparency in winter was higher than that in spring and the mean was 4. 7 meters. The relation between absorption coefficient (m) and transparency (D) was m= 1. 67/ D. The rate of light penetration at 5 m-layer in the area ranged from 1. 73 to 24.09 percent and the mean was 13.63 percent, while the rate at 10 m-layer ranged from 0.067 to 8.05 percent and the mean was 2.95 percent.

  • PDF

Fabrication and Characteristics of Indium Tin Oxide Films on CR39 Substrate for OTFT

  • Kwon, Sung-Yeol
    • Transactions on Electrical and Electronic Materials
    • /
    • v.7 no.5
    • /
    • pp.267-270
    • /
    • 2006
  • The Indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. ITO thin films deposited at room temperature because CR39 substrates its glass-transition temperature of is $130^{\circ}C$. ITO thin films used bottom and top electrode and for organic thin film transparent transistor.(OTFT) ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300 - 800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300 - 800 nm) measured without post annealing process and $9.83{times}10{-4}{\Omega}cm$ a low resistivity was measured thickness of 300 nm.

Fabrication and characteristics of ITO thin films on CR39 substrate for transparent OTFT

  • Kwon, Sung-Yeol
    • Journal of Sensor Science and Technology
    • /
    • v.16 no.3
    • /
    • pp.229-233
    • /
    • 2007
  • The indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. The ITO thin films deposited at room temperature because CR39 substrate its glass-transition temperature is $130^{\circ}C$. The ITO thin films used bottom and top electrode and for organic thin film transparent transistors (OTFTs). The ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300-800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of the ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300-800 nm) measured without post annealing process and a low resistivity value $9.83{\times}10^{-4}{\Omega}cm$ was measured thickness of 300 nm. All fabrication process of ITO thin films did not exceed $80^{\circ}C$.

Fabrication and Characteristics of Indium Tin Oxide Films on Polycarbonates CR39 Substrate for OTFTs

  • Kwon, Sung-Yeol
    • Korean Journal of Materials Research
    • /
    • v.17 no.4
    • /
    • pp.232-235
    • /
    • 2007
  • Indium tin oxide (ITO) films were deposited on polycarbonate CR39 substrate using DC magnetron sputtering. ITO thin films were deposited at room temperature because glass-transition temperature of CR39 substrate is $130^{circ}C$ ITO thin films are used as bottom and top electrodes and for organic thin film transparent transistor (OTFT). The electrodes electrical properties of ITO thin films and their optical transparency properties in the visible wavelength range (300-800 nm) strongly depend on the volume of oxygen percent. The optimum resistivity and transparency of ITO thin film electrode was achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85% transparency in the visible wavelength range (300-800 nm) was measured without post annealing process, and resistivity as low as $9.83{\times}^{TM}10^{-4}{\Omega}$ cm was measured at thickness of 300 nm.

Flexible and Transparent Silica Aerogels: An Overview

  • Parale, Vinayak G.;Lee, Kyu-Yeon;Park, Hyung-Ho
    • Journal of the Korean Ceramic Society
    • /
    • v.54 no.3
    • /
    • pp.184-199
    • /
    • 2017
  • Silica aerogels are attracting attention due to certain outstanding properties such as low bulk density, low thermal conductivity, high surface area, high porosity, high transparency and flexibility. Due to these extraordinary properties of aerogels, they have become a promising candidate in thermal superinsulation. The silica-based aerogels are brittle in nature, which constrains their large scale-application. It is necessary to achieve transparency and flexibility of silica-based aerogels at the same time and with the same porous structure for optical field applications. Therefore, the present review focuses on the different sol-gel synthesis parameters and precursors in the synthesis of flexible as well as transparent silica aerogels. Also, a brief overview of reported flexible and transparent aerogels with some important properties and applications is provided.

Characterization of Colorless and Transparent Polyimide Films Synthesized with Various Amine Monomers (다양한 아민 단량체로 합성한 무색투명 폴리이미드 필름 특성)

  • Choi, Il-Hwan;Chang, Jin-Hae
    • Polymer(Korea)
    • /
    • v.34 no.5
    • /
    • pp.480-484
    • /
    • 2010
  • A series of poly(amic acid)s(PAAs) was prepared by reacting 4,4'-(4,4'-isopropylidenediphenoxy) bis(phthalic anhydride)(BPADA) as the anhydride monomer and 2,2'-bis(trifluoromethyl) benzidine (TFB), bis(3-aminophenyl)sulfone (APS), 4,4'-methylenebis-(2-methylcyclohexylamine) (MMCA), or bis[4-(3-aminophenoxy) phenyl] sulfone (BAPS) as the amine monomer with 5 mol% melamine in N,N-dimethylacetamide (DMAc). Colorless and transparent polyimide (PI) films were obtained by casting the PAAs at various heat treatment temperatures. The thermo-mechanical properties and optical transparency of the PI films were investigated. The thermal properties of the PI films were examined using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermomechanical analysis (TMA), and their optical transparency were measured by spectrophotometry. The coefficient of thermal expansion (CTE) and yellow index (YI) values of all samples were in the range of $48.53-64.24ppm/^{\circ}C$ and < 3.0, respectively.

Calculation on Electronic Structure of ZnO with Impurities Belonging to III and IV Family (III, IV족 불순물이 첨가된 ZnO의 전자상태계산)

  • Lee, Dong-Yoon;Kim, Hyun-Ju;Koo, Bo-Kun;Lee, Won-Jae;Song, Jae-Sung
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.07a
    • /
    • pp.309-312
    • /
    • 2004
  • The electronic structure of ZnO oxide semiconductor having high optical transparency and good electric conductivity was theoretically investigated by $DV-X_{\alpha}$(the discrete variation $X_{\alpha}$) method, which is a sort of the first principle molecular orbital method using Hatre-Fock-Slater approximation. The electrical and optical properties of ZnO are seriously affected by the addition of impurities. The imnurities are added to ZnO in order to increase the electric conductivity of an electrode without losing optical transparency. In this study, the effect of impurities of III and IV family on the band structure, impurity levels and the density of state of ZnO were investigated. The cluster model used for calculations was $[MZn_{50}O_{53}]^{-2}$(M=elements belonging to III and IV family).

  • PDF

Colorless Copolyimide Films: Thermo-mechanical Properties, Morphology, and Optical Transparency (무색 투명한 폴리이미드 공중합체 필름 : 열적-기계적 성질, 모폴로지, 및 광학 투명성)

  • Jin, Hyo-Seong;Chang, Jin-Hae
    • Polymer(Korea)
    • /
    • v.32 no.3
    • /
    • pp.256-262
    • /
    • 2008
  • Copolyimides containing pendant trifluoromethyl ($CF_3$) groups were synthesized from 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and bis[4-(3-aminophenoxy)phenyl]sulfone (BAPS) with various concentrations of 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane(BAPP) to poly(amic acid)(PAA), followed by thermal imidization. These copolyimides were readily soluble in N,N'-dimethylacetamide (DMAc) and could be solution-cast into a flexible and tough film. The thermomechanical properties, morphology and an optical transparency of the copolyimide films were determined using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), wide angle X-ray diffraction (XRD), scanning electron microscopy (SEM), universal tensile machine (UTM), and a UV-Vis spectrometer. The cast copolyimide films exhibited high optical transparency with a cut-off wavelength (${\lambda}_0$) of $275{\sim}319\;nm$ in UV-vis absorption and a low yellow index(YI) value of $3.65{\sim}10.37$. The thermo-mechanical properties of copolyimide films were enhanced linearly with increasing a BAPP content. In contrast, the optical transparency of the copolyimide films was found to get worse with increasing a BAPP content.

Thermal and Optical Properties of Heat-Resistant Core Materials in Plastic Optical Fiber (내열성 플라스틱 광섬유 코어재료의 열적 및 광학적 성질)

  • Lee Gyu-Ho;Cho Won-Keun;Park Min;Lee Hyun-Jung
    • Polymer(Korea)
    • /
    • v.30 no.2
    • /
    • pp.158-161
    • /
    • 2006
  • Recently the application of plastic optical fiber (POF) in automotives and planes demands the heat-resistant and high refractive index con materials. We synthesized polyglutarimides (PGIs) via imidization of PMMA with primary amines under high pressure and high temperature and investigated thermal and optical properties by varying the molar ratio of amines and the type of amines (ethyl amine vs. isopropyl mine). The degree of imidization was calculated based on the peak intensity in $^1H$ NMR and FTIR. We found that the glass transition temperature $(T_g)$ of PGIs increased over $30^{\circ}C$ compared to the traditional core materials in POF, PMMA, and they are stable up to $300\sim400^{\circ}C$. PGIs anthesized with ethyl mine show the better heat resistance than those with isopropyl amines. Additionally, they show the comparable transparency and higher refractive index than PMMA. It implies that they can be utilized as the excellent photo-efficient and heat-resistant core materials in POF.

Crystal Growth and Spectroscopic Investigation of Yb,Er:$YCa_4O{(BO_3)}_3$ for 1.55$\mu m$ Laser

  • Jeong, Suk-Jong;Yu, Young-Moon
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 1999.08a
    • /
    • pp.220-221
    • /
    • 1999
  • Single crystals of Yttrium Calcium Oxyborate (YCOB) doped with different concentrations of Er3+ and Yb3+ ions were growth by Czochralski method. High qualities of crystals in morphology and transparency were obtained . Analysis on crystal structure and lattice parameters were performed by X-ray diffraction method. It was found that congruent melting composition is YCA4.2O1.2(BO3)3. Absorption and fluorescence properties of grown crystals were also reported.

  • PDF