• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1343-1346
• /
• 2006

Optical performances of micro-pyramid arrays were simulated by ray tracing technique for the application of backlight unit of LCD. The angular distribution of the luminance and the on-axis luminance gain depended on the apex angle, the refractive index, and the density of micro-pyramids. The on-axis luminance reached a maximum when the apex angle was $90^{\circ}$. It also increased as the density and the refractive index of micro-pyramids increased. The present result showed that highly-efficient optical sheet might become realized by adopting micropyramid array and corresponding development of manufacturing processes.

• 열처리공학회지
• /
• 제24권4호
• /
• pp.199-202
• /
• 2011

Ga doped ZnO thin films were deposited with RF magnetron sputtering on glass substrate without intentional substrate heating and then the effect of post deposition annealing temperature on the structural, optical and electrical properties of the films was investigated. The post deposition annealing process was conducted for 30 minutes in a vacuum of $1{\times}10^{-3}$ Torr and the vacuum annealing temperatures were 150 and $300^{\circ}C$, respectively. As increase annealing temperature, GZO films show the increment of the prefer orientation of ZnO (002) diffraction peak in the XRD pattern and the optical transmittance in a visible wave region was also increased, while the electrical sheet resistance was decreased. The figure of merit obtained in this study means that GZO films which vacuum annealed at $300^{\circ}C$ have the highest optoelectrical performance in this study.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.27-31
• /
• 2017

AZO/Ag/AZO multi-layer films deposited on glass substrate by RF magnetron sputtering and thermal evaporator have a much better electrical properties than Al-doped ZnO thin films. The multi-layer structure consisted of three layers, AZO/Ag/AZO, the electrical and optical properties of AZO/Ag/AZO were changed mainly by thickness of Ag layers. The optimum thickness of Ag layers was determined to be $90{\AA}$ for high optical transmittance and good electrical conductivity. The Ag layers thickness $90{\AA}$ is an optical transmittance greater than 80% of visible light and the obtained multilayer thin film with the low resistivity of $8.05{\times}10-3{\Omega}cm$ and the low sheet resistance $5.331{\Omega}/sq$. Applying to TCO and Solar electrode will improve efficiency.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.87-91
• /
• 2019

As a highly conductive and transparent electrode, ITO/Ag/ITO multilayers are fabricated using an in-line sputtering method. Optimal thickness conditions have been investigated in terms of the optical transmittance and the electrical conductance. Considering the optical properties, in this study, the experimental characteristics are analyzed based on theoretical phenomena, and they are compared with the simulated results. The simulations are based on the finite-difference-time-domain (FDTD) method in solving linear Maxwell equations. Consequently, the results showed that ITO/Ag/ITO multilayer structures with respective thicknesses of 39.2 nm/10.7 nm/39.2 nm are most suitable with an average transmittance of about 87% calculated for wavelengths ranging from 400-800 nm and a sheet resistance of about $7.1{\Omega}/{\square}$.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권2호
• /
• pp.67-70
• /
• 2002

Multi-period low-emissivity (low-e) filters based on [TiO$_2$｜Ti｜Ag｜TiO$_2$] layer structure were designed and fabricated by a RF magnetron sputtering method. Optical, structural, chemical, and electrical properties were investigated with various analytical tools. Interface layers consisting of Ag, Ti, and O were observed next to Ag layers by Rutherford backscattering spectrometry (RBS) analysis. The results show that Ti layers of ~ 1.8 nm protect the Ag layers from oxidation better than those of ~ 1 nm and the optical spectra of the filter with thicker Ti layers are in agreement with the simulated one. The average transmittance of a low-e filter with thicker Ti layers is reduced and the sheet resistance is slightly increased due to the increased Ti thickness.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.43.2-43.2
• /
• 2011

Single-walled carbon nanotubes (SWCNT) are transparent in the visible and show conductivity comparable to copper, and are environmentally stable. SWCNT films have high flexibility, conductivity and transparency approaching that indium tin oxide (ITO), and can be prepared inexpensively without vacuum equipment. Transparent conducting Films (TCF) of SWCNTs has the potential to replace conventional transparent conducting oxides (TCO, e.g. ITO) in a wide variety of optoelectronic devices, energy conversion and photovoltaic industry. However, the sheet resistance of SWCNT films is still higher than ITO films. A decreased in the resistivity of SWCNT-TCFs would be beneficial for such an application. We fabricated SWCNT sheet with $KAuBr_4$ on PET substrate. Arc-discharge SWCNTs were dispersed in deionized water by adding sodum dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWCNT was spray-coated on PET substrate and dried on a hotplate at $100^{\circ}C$. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then treated with AuBr4-, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. $HNO_3$ treated SWCNT films with Au nano-particles have the lowest 61 ${\Omega}$/< sheet resistance in the 80% transmittance. Sheet resistance was decreased due to the increase of the hole concentration at the washed SWCNT surface by p-type doping of $AuBr_4{^-}$.

• 한국재료학회지
• /
• 제26권7호
• /
• pp.388-392
• /
• 2016

A cold roll-bonding process was applied to fabricate an AA1050/AA6061/AA1050 laminate complex sheet. Two AA1050 and one AA6061 sheets of 2 mm thickness, 40 mm width and 300 mm length were stacked up after surface treatment that included degreasing and wire brushing; material was then reduced to a thickness of 3 mm by one-pass cold rolling. The laminate sheet bonded by the rolling was further reduced to 1.2 mm in thickness by conventional rolling. The rolling was performed at ambient temperature without lubricant using a 2-high mill with a roll diameter of 210 mm. The rolling speed was 5.0 m/sec. The AA1050/AA6061/AA1050 laminate complex sheet fabricated by roll bonding was then hardened by natural aging T4) and artificial aging (T6) treatments. The microstructures of the as-roll bonded and the age hardened Al complex sheets were revealed by optical microscope observation; the mechanical properties were investigated by tensile testing and hardness testing. The strength of the as-roll bonded complex sheet was found to increase by 2.9 times compared to that value of the starting material. In addition, the hardness of the complex sheets increased with cold rolling for AA1050 and age-hardening treatment for AA6061, respectively. After heat treatment, both AA1050 and AA6061 showed typical recrystallization structures in which the grains were equiaxed; however, the grain size was smaller in AA6061 than in AA1050.

• 한국안광학회지
• /
• 제15권4호
• /
• pp.299-305
• /
• 2010

목적: 본 연구에서는 투명 전도막으로 사용할 안티몬주석산화물 박막의 특성변수인 RF 전력, T-S간 거리 등의 변화에 따른 박막의 광학적, 전기적, 구조적 특성을 알아보았다. 방법: 안티몬주석산화물 박막을 마그네트론 스퍼트링 방법으로 실온에서 $SnO_2:Sb_2O_5$= 95:5 wt%의 비율로 제작하였다. 결과: 안티몬주석산화물 박막은 RF 입력전력에 가장 민감한 특성변화를 보였는데, 30W의 RF 입력전력에서 광투과율이 78%, 표면거칠기가 0.56 nm, 면저항이 1007 $\Omega{\cdot}cm^{-2}$이었다. 결론: 안티몬주석산화물 박막은 T-S간 거리와 RF 전력에 따라 구조적, 광학적 및 전기적 특성이 크게 달라지는 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제36권2호
• /
• pp.217-221
• /
• 2012

노트북용 액정 모듈 내부의 광학 시트(Optical Sheet) 변형에 기인한 시인성 품질 불량을 개선하기 위한 기초 연구의 일환으로 변형 유발의 요인인 온도 및 습도의 영향을 분석할 수 있는 측정 시스템이 필요하였다. 액정 모듈 내부에는 0.5mm 미만의 미세한 공기 층이 존재하는데, 이 공간으로 외부의 습한 공기가 내부로 확산되는 것으로 추정된다. 이러한 현상을 규명하기 위하여 초소형 온도 및 습도 센서를 실장한 초박형 센서 PCB 를 액정 모듈 내부에 삽입하여 실시간으로 온/습도 변화를 측정 및 분석하였으며, 향후 변형 거동 시뮬레이션 및 구조 설계 시 필요한 기초 데이터로 활용하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권4호
• /
• pp.17-26
• /
• 1995

In general existing air conditioning devices, which are carried out by convection heat transfer, are very popular compared with the radiation type air conditioning devices. But perconal convection tpe air conditioning units are unuseful air conditioning type because it handles amount of surrounded air to meet the temperature and humidity. In this view, this study is intended to develope personal dir conditioning units using a radiation type radiator. Liquid Droplet Radiator(L.P.R.) radiates the energy by means of thermal radiation. Radiative energy from L.P.R. is the infrared rays which heat the objects without lose of energy. It is a desirable heating method for the local area within the large room. In this study, the analysis uses the Monte Carlo methd to predict the temperature distribution in the droplet sheet and the net heat flux from the L.D.R.. And for this study and experiment was carried out to analyse the radiative and convective heat transfer characteristics in the L.D.R.. And the experiment was investigated the effects of inlet temperature, feed rate, optical thickness and droplet diameter on heat transfer characteristics of L.D.R.. The obtained results from the numerical and experimental studies of L.D.R. were as follows ; (1) The heat flux of L.D.R. was effected by extinction coefficient of droplet sheet, optical thickness and droplet temperature, surface area and emissivity of the droplet. And it was increased with the temperature, feed rate and optical thickness, on the other hand decreased with increasing of droplet diameter. (2) The experimental results for heat flux was ecalucted below 20% than that of the numerical solution by Monte Carlo method, but the tendency of the variation shows relatively good agreement.