• 소성∙가공
• /
• 제32권4호
• /
• pp.180-190
• /
• 2023

This study deals with residual stress prediction and hardness evaluation within cross ball grooved inner race fabricated by cold upsetting process consisted of upsetting and ejection steps. A raw workpiece material of AISI 5120H (SCr420H) is first spheroidized and annealed, then phosphophyllite coated to form solid lubricant layer on its outer surface. To investigate influences of the heat treatment, uni-axial compression tests and Vickers micro-hardness measurements are conducted. Three-dimensional elasto-plastic FE simulations on the upsetting step and the ejection one are performed to visualize the residual stress and the ductile (plastic deformation) damage. External feature of the fabricated inner race is fully captured by using an optical 3D scanner, and the micro-hardness is measured on internal cross-sections. Consequently, the dimensional compatibility between the simulated inner race and the fabricated one is ensured with a difference of under 0.243mm that satisfied permissible error range of ±0.50mm on the grooved surface, and the predicted residual stress is verified to have similar distribution tendency with the measured Vickers micro-hardness.

• 한국광학회지
• /
• 제10권3호
• /
• pp.195-200
• /
• 1999

가열인장(heating and pulling)방법을 이용하여 개구부 직경이 약 100nm 이하인 광섬유 탐침을 제작하였으며, 이를 이용하여 일정광량 방식의 광자주사현미경을 제작하였다. 광섬유 탐침을 물체에 미세하게 접근시켜서 물체면을 주사하기 위하여 원통형 PZT(piezoelectric transducer)를 x-y-z의 3부분으로 나누어 z축의 미세접근 및 1.43$\mu\textrm{m}$ $\times$ 1.76$\mu\textrm{m}$의 면적을 x-y축으로 주사할 수 있는 3차원 PZT 주사기를 제작하였다. 그리고 광섬유 탐침에서 검출되는 에바네슨트라의 광량이 항상 일정하도록 전자적인 되먹임 회로에 의한 광섬유 탐침이 1$\lambda$ ($\lambda$ 는 입사파장임) 이하의 근접장 영역에서 물체로부터의 높이가 일정하도록 하였다. 그리고 이렇게 제작된 일정광량 모드의 광자주사 현미경을 이용하여 정상파 형태의 에바네슨트파를 측정하였다.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.1-12
• /
• 1999

Of the vast number of plant taxa in the world, the wood is one of the most useful resources. It is important to identify the fibers of wood and pulp for the plant taxonomy and for the uses, but we do not have enough information on them, on them, especially for the computerizd data. The fiber identification is one of the difficult tasks. In addition to the plant taxonomy and the fiber-using industries, such identification is also important in many other fields, including education. document examiners, etc. For these purpose, the fibers should be exactly distinguished. The TISS system I have programed to identify various woods would also be useful in the identification of fibers by the genus and species in the features of unknown samples and in searching the features of a species based on its scientific name. Such searching programs are being developed in many other countries with a view to searching for the species name by using the features of the cells of the woody materials. With the survey of all the available literature, the features of the fibers of 124 species both of softwood and hardwood were examined under the electron and optical microscopies. Each species were coded and carded by the feature, and the databases were built. The microscopic were inputted into a personal computer program called and by a slide film scanner. The new computer program called TISS 2 was developed using C computer language. Korean language fonts were added to the TISS 2. The TISS 2 can be in adding and searching a image of fiber features both of a known fiber and an unknown fiber. The databases were corded for the DELTA system with was developed by Dallwitz and Paine in Australia, 1986.

• 대한치과보철학회지
• /
• 제58권2호
• /
• pp.169-175
• /
• 2020

임플란트 상부 보철물 제작 시 치은연하 변연을 가지는 맞춤형 지대주의 인상채득을 위해 전통적으로 치은 압배술이 실시되어 왔다. 하지만 치은 압배술은 치은 퇴축 등의 부작용이 있으며 출혈은 부정확한 인상채득의 원인이 될 수 있다. 본 증례에서는 이러한 문제점들을 해결하기 위해 보철물을 제작할 때 중첩 가능하도록 제작된 맞춤형 지대주를 이용하는 새로운 방법을 적용하였다. 지대주를 임플란트에 연결하기 전 형상데이터를 저장하고, 임플란트에 연결 후 치은 압배 과정 없이 광학 인상채득한 뒤 두 데이터를 중첩하여 상부보철물을 제작하였다. 치은 연하 변연을 가지는 임플란트 보철물 제작 시 심미성을 만족시키면서 기존의 인상채득 방식보다 빠르고 간편하며 우수한 변연 및 내면적합도를 보였기에 임상적 효용성에 대해 보고하고자 한다.

• 한국광학회지
• /
• 제27권5호
• /
• pp.165-173
• /
• 2016

본 연구는 2개의 라인 레이저를 이용하여 3차원 형상을 획득하는 방법에 대해 제안한다. 제안하는 방법은 532 nm와 630 nm 파장의 레이저를 이용하여 2-라인 레이저를 생성하고 이를 대상객체에 조사하여 반사되는 빛을 영상센서로 획득하는 것을 통해 3차원 점 데이터를 연산한다. 이를 위해 레이저와 카메라 간의 위치를 결정하고 각 레이저의 평면 방정식 계수를 추정하며 삼각법을 통해 이미지 공간의 라인을 3차원 공간의 점으로 변환한다. 제안하는 시스템은 2개의 라인 레이저와 데이터 정합을 위한 스태핑 모터 제어부와 영상을 획득하고 레이저의 라인을 추출하는 영상처리부, 그리고 추출된 라인으로부터 3차원 점 데이터를 처리하고 3D 모델을 생성하는 3D 모델링부로 나뉜다. 제안하는 방법은 기존 단일 레이저 스캐닝 방식과 비교하여 가려짐으로 인해 발생하는 데이터 소실문제를 해결할 수 있다.

• Journal of Periodontal and Implant Science
• /
• 제47권6호
• /
• pp.381-387
• /
• 2017

Purpose: The aim of this study was to evaluate volumetric and histologic changes in edentulous alveolar ridge areas after ridge preservation using basic fibroblast growth factor-2 (bFGF-2) in combination with collagenated biphasic calcium phosphate (BCP). Methods: The experiments were performed in 6 adult male beagle dogs. The following 3 groups were created: 1) ridge preservation with bFGF-2 and collagenated BCP (experimental group), 2) ridge preservation with collagenated BCP (positive control group), and 3) a negative control group in which no ridge preservation procedure was performed. Volumetric change analysis was performed using an optical scanner and casts. Histological observations were made using light microscopy. Results: After the initial swelling subsided, the magnitude of the volumetric change in the experimental group and positive control group was smaller than in the negative control group. In the experimental group, a distinct trend was observed for the resorption of residual bone and collagen fibers at 4 weeks and for more mature bone and faster healing at 12 weeks. Conclusions: Based on the findings of the present study, bFGF-2 may be considered for use as a therapeutic molecule in ridge preservation procedures.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.143-148
• /
• 2006

It is still very difficult to generate a geometry model and finite element model, which has complex and many free surface, even though 3D CAD solutions are applied. Furthermore, in the medical field, which is a big growth area of recent years, there is no drawing. For these reasons, making a geometry model, which is used in finite element analysis, is very difficult. To resolve these problems and satisfy the requests of the need to create a 3D digital file for an object where none had existed before, new technologies are appeared recently. Among the recent technologies, there is a growing interest in the availability of fast, affordable optical range laser scanning. The development of 3D laser scan technology to obtain 3D point cloud data, made it possible to generate 3D model of complex object. To generate CAD and finite element model using point cloud data from 3D scanning, surface reconstruction applications have widely used. In the early stage, these applications have many difficulties, such as data handling, model creation time and so on. Recently developed point-based surface generation applications partly resolve these difficulties. However there are still many problems. In case of large and complex object scanning, generation of CAD and finite element model has a significant amount of working time and effort. Hence, we concerned developing a good direct finite element model generation method using point cloud's location coordinate value to save working time and obtain accurate finite element model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.21-22
• /
• 2008

In the paper, we report several experimental data capable of evaluating the phase transformation characteristics of $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ (x =0, 0.05, 0.1) thin films. The $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ phase change thin films have been prepared by thermal evaporation. The crystallization characteristics of amorphous$Ag_x(Ge_2Sb_2Te_5)_{1-x}$ thin films were investigated by using nano-pulse scanner with 658 nm laser diode (power; 1~17 mW, pulse duration; 10~460 ns) and XRD measurement. It was found that the more Ag is doped, the more crystallization speed was 50 improved. In comparision with $Ge_2Sb_2Te_5$ thin film, the sheet resistance$(R_{amor})$ of the amorphous $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ thin films were found to be lager than that of $Ge_2Sb_2Te_5$ film($R_{amor}$ $\sim10^7\Omega/\square$ and $R_{cryst}$ 10 $\Omega/\square$). That is, the ratio of $R_{amor}/R_{cryst}$ was evaluates to be $\sim10^6$ This is very helpful to writing current reduction of phase-change random acess memory.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권1호
• /
• pp.15-19
• /
• 2015

The depth information of an image is used in a variety of applications including 2D/3D conversion, multi-view extraction, modeling, depth keying, etc. There are various methods to acquire depth information, such as the method to use a stereo camera, the method to use the depth camera of flight time (TOF) method, the method to use 3D modeling software, the method to use 3D scanner and the method to use a structured light just like Microsoft's Kinect. In particular, the depth camera of TOF method measures the distance using infrared light, whereas TOF sensor depends on the sensitivity of optical light of an image sensor (CCD/CMOS). Thus, it is mandatory for the existing image sensors to get an infrared light image by bundling several pixels; these requirements generate a phenomenon to reduce the resolution of an image. This thesis proposed a measure to acquire a high-resolution image through gradual area movement while acquiring a low-resolution image through pixel bundling method. From this measure, one can obtain an effect of acquiring image information in which illumination intensity (lux) and resolution were improved without increasing the performance of an image sensor since the image resolution is not improved as resolving a low-illumination intensity (lux) in accordance with the gradual pixel bundling algorithm.

• 대한치과기공학회지
• /
• 제42권1호
• /
• pp.9-16
• /
• 2020

Purpose: The purpose of this study was to compare the marginal and internal fit of lithium disilicate ceramic inlay produced by heat pressing that inlay pattern made by subtractive manufacturing and additive manufacturing method. Methods: A mandibular lower first molar that mesial occlusal cavity (MO cavity) die was prepared. After fabricating an epoxy resin model using a silicone impression material, epoxy resin die was scanned with a dental model scanner to design an MO cavity inlay. The designed STL pile was used to fabricate wax patterns and resin patterns, and then lithium disilicate ceramic inlays were fabricated using hot-press method. For the measurement of the marginal and internal gap of the lithium disilicate, silicone replica method was applied, and gap was measured through an optical microscope (x 80). Data were tested for significant differences using the Mann-Whitney Utest. Results: The marginal fit was 103.56±9.92㎛ in the MIL-IN group and 81.57±9.33㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). The internal fit was 120.99±17.52㎛ in the MIL-IN group and 99.18±6.65㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). Conclusion: It is clinically more appropriate to apply the additive manufacturing than subtractive manufacturing method in producing lithium disilicate inlay using CAD/CAM system.