• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.492-492
• /
• 2014

On account of the good conductivity and optical properties, TCO is generally used in silicon heterojunction solar cell since the emitter material, hydrogenated amorphous silicon (a-Si:H), of the solar cell has low conductivity compare to the emitter of crystalline silicon solar cell. However, the work function mismatch between TCO layer and emitter leads to band-offset and interfere the injection of photo-generated carriers. In this study, work function engineering of TCO by oxygen reactive sputtering method was carried out to identify the trend of band-offset change. The open circuit voltage and short circuit current are noticeably changed by work function that effected from variation of oxygen ratio.

• 한국분무공학회지
• /
• 제6권2호
• /
• pp.22-28
• /
• 2001

Recently, many researches have been performed to improve the combustion and emission in a D.I.Diesel engine. Especially reduction of the soot formation in the combustion chamber is the essential to acquire the improvement of the emission performance. This emission of the diesel combustion is effected by the characteristics of air-fuel mixing. Therefore, the optical measurement technique such as LII and LIS were established in order to visualize the distribution of the soot and analyze the particle including spray in the combustion chamber. In this study, we developed the algorithm for calculating relative diameter and density of particle and applied this method to measure stimultaneously the distribution of soot and spray in a D.I. diesel engine. From this experiment we found that the soot is existed in the rich region of spray and generated caused by incapable air fuel mixture.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of $218nW/cm^{2}$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.99-106
• /
• 1999

The present study deals with the effect of combustion chamber shape on in-cylinder soot oxidation characteristics of a D.I . diesel engine. The analysed combustion chambers were a toroidal and a reentrant with a projection(Complex). The two-color method was used to measure in-cylinder flame temperature and KL value which is approximately proportional to the soot amount along the optical path. In addition, heat release rate was calculated from the in-cylinder pressure data. From these investigations , the soot oxidation of the reentrant and the complex which were strengthen squish flows went worse in late combustion period under heavy-load operation compared to that of the toroidal at retarded fuel injection timing . It might be the cause of the flame holding that squish lip depress the outflow of flame from the bowl to the entire combustion space.

• 반도체디스플레이기술학회지
• /
• 제4권3호
• /
• pp.17-22
• /
• 2005

LED lamp was designed by the serial-parallel integration of LED chips in metal-interconnection. The 7 $4.5{\times}4.5\;in^{2}$ masks were designed with the contact type of chrome-no mirror?dark. The white epitaxial thin film was grown by metal-organic chemical vapor deposition. The active layers were consisted with the serial order of multi-quantum wells for blue, green and red lights. The fabricated LED chip showed the electroluminescence peaked at 450, 560 and 600 nm. For the current injection of 20 mA, the operating voltage was measured to 4.25 V and the optical emission power was obtained to 0.7 $\mu$W.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1992-1994
• /
• 2007

In this paper we propose a cryogenic sensor system which can measure the temperature at higher resolution at low temperature using temperature-dependent amplified spontaneous emission of erbium-doped fiber pumped by a 1480 nm laser diode. The measurement resolution of the sensor system could be enhanced through the modulation of injection current of the pump laser diode. The measurement resolution considering the fluctuation of the light source in the sensor system was ${\sim}0.4$ K in the room temperature regime and ${\sim}0.07$ K in the liquid nitrogen temperature regime.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.942-944
• /
• 2009

Blue phase shows several different reflection colors from the randomly oriented domains and crystal direction. Also there are variations in the size of domains. The domain size is dependent on the temperature gradient. With smaller cooling rate of temperature, the domain size was increased compared with rapid cooling. With injection of light of specific wavelength, we find that the diffraction patterns were occurred around the light spot in the cell of blue phase. It was supposed to be from the matching of the phase retardation and domain size. However, actually the diffraction pattern is reflecting the lattice structure in double twist of the blue phase. The lattice constant from the radius of diffraction patterns shows very similar one from the reflection spectrum, which indicates the internal lattice constant in double twist of the blues phase.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권2호
• /
• pp.55-60
• /
• 2006

In order to suppress lasing oscillation and obtain high light power, We have proposed a novel SLD which is formed with a straight and tilted waveguide. The window region is used to suppress lasing oscillation and reduce the facet reflectivity. High power and low reflectivity is obtained by the straight and tilted waveguide. Based on the theoretical analysis, we have fabricated the SLD with the waveguide of 500 $\mu$m length and window region of 50 $\mu$m by LPE equipment. Through the measurements of optical characteristics, the output light power of 3 mW was obtained at the 150 mA CW injection current and 25$^{circ}C$. We have confirmed that the proposed SLD has a 0.8 dB spectrum ripple lower than 1 dB which is sufficiently low reflectivity for preventing lasing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.23-28
• /
• 2014

In this paper, we discuss on the optimal design scheme of the bilayer OLED (Organic Light Emitting Diodes) with micro-cavity structure. We carried out the optical simulation on the OLED device and calculated optimal scale of devices with taking the micro-cavity effect into account. Our emission model is based upon an ensemble of radiating dipole antennas. Consequently, we applied Maxwell's equation to this sequence, followed by the analysis on the electrical behaviors of OLED device using Poisson's equation. It contains carrier injection and transportation mechanism. In this process, we found out the thickness of each layer can affect the recombination rate at the emission layer. Therefore, we optimized the thickness of each layer to improve the efficiency of the device.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.11-15
• /
• 2006

We propose an optical and an electrical detection methods for detecting various bio-molecules effectively with microcantilevers. The microcantilevers were fabricated employing surface micromachining technique that has attractive advantages in terms of cost efficiency, simplicity and ability of fabricating in array. The fluid cell system for injection of bio-molecular solution is fabricated using polydimethylsiloxane (PDMS) and a fused silica glass. The microcantilever is deflected with respect to the difference of the surface stress caused by the formation of self-assembled bio-molecules on the gold coated side of the microcantilever. It detected cystamine dihydrochloride and glutaraldehyde molecules and analyzed individual concentrations of the cystamine dihydrochloride solution. We confirm that the deflections of bending-up or bending-down are occurred by the bio-molecule adsorption and microcantilever can be widely used to a ${\mu}-TAS$ and a lab-on-a-chip for a potential detection of various bio-molecules.