• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.780-785
• /
• 2003

Recently the trends in information storage devices need small size, mobility, high capacity, and low power consumption etc. To satisfy those, the development of high performance actuator is an important issue. Compared with general linear actuator for optical disk drive, swingarm type rotary actuator is suitable to design in small form factor and has fast access time for random access. Swingarm actuator is designed considering the structural problem and the actuating force of VCM(Voice Coil Motor). The increase of mass caused by optical components makes vibration problems of swing-arm, therefore resonance frequency should be increased and inertia has to be reduced. ANSYS FEM tool is employed in optimizing swingarm. The VCM is designed using 3-D electro-magnetic analysis, and parameters of magnetic circuit are determined to matte large flux density. The large flux density enables to achieve low power consumption. VCM holder is designed to get the mass balance of total actuator and this balance reduces the magnitude of critical mode relative to pivot bearing, It is expected that swingarm type rotary actuator designed by this method is available to variable type of micro optical disk drives.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.13-17
• /
• 2002

For elimination DC component, the optical recording systems generally exploit WRDS (word-end running digital sum) criterion. However, its performance is degraded if the lengths of the control bits and codewords are increased. Another criterion is MSW (mean-square weight) method. Whereas MSW criterion has the complexity, this hs optimal performance. In this paper, we have proposed a new dc-component suppression method (MPRDS, minimum peak RDS) of the modulation codes for high density optical recording system. This method requires less complexity than MSW's, and the performance is near to MSW's even if the lengths of the control bits and codewords are increased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.65-69
• /
• 2004

The small form factor optical data storage devices are developing rapidly nowadays. Since it is designed for portable and compatibility with flash memory, its components such as disk, head, focusing actuator, and spindle motor should be assembled within 5 m thickness. The thickness of focusing actuator is within 2 mm and the total working range is $+/-100{\mu}m$, with the resolution of less than $1{\mu}m$. Since the thickness is limited tightly, it is hard to place the yoke that closes the magnetic circuit and hard to make strong flux density without yoke. Therefore, Halbach array is adopted to increase the magnetic flux of one side without yoke. The proposed Halbach array type focusing actuator has the advantage of thin actuation structure with sacrificing less flux density than conventional magnetic array. The optical head unit is moved on the swing arm type tracking actuator. Focusing coil is attached to swing arm, and Halbach magnet array is positioned at the bottom of deck along the tracking line, and focusing actuator exerts force by the Fleming's left hand rule. The working range and resolution of focusing actuator are analyzed with FEM and experiment.

• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.256-261
• /
• 2019

In this study, mid-infrared transparent zinc sulfide (ZnS) ceramics were fabricated through hydrothermal synthesis with different molar ratios of S/Zn (S/Zn = 0.8, 1.0, 1.2, 1.4, and 1.6). The ZnS ceramics were sintered at a relatively low temperature of $850^{\circ}C$ to prevent the occurrence of the hexagonal phase featuring optical anisotropy. The phase composition, microstructure, and optical properties of the ZnS ceramics were subsequently investigated by employing X-ray diffraction, scanning electron microscopy, and Fouriertransform infrared spectroscopy. The results obtained indicate that the ZnS nanoparticles feature the cubic phase, without the hexagonal phase. Moreover, with increasing S, the crystallinity and particle size of the ZnS nanoparticles increased. The crystallinity and density of the ZnS ceramics improved when the molar ratio of S was higher than the molar ratio of Zn, thereby enhancing the transmittance. Furthermore, the ZnS ceramic with an S/Zn value of 1.2 was found to exhibit the highest transmittance of approximately 69% owing to the reduced occurrence of the hexagonal phase and a high density of 99.8%.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.75-79
• /
• 1997

Optical and mechanical characteristics of $TiO-2, ZrO_2 \;and\; SiO_xN_y$ thin films prepared by ion assisted deposition (IAD) were investigated. IAD films were bombarded by Ar or nitrogen ion beam from a Kaufman ion source while they were grown in as e-beam evaporator. The result shows that the Ae IAD increases the refractive index and packing density of $TiO_2 films close to those of the bulk. For $ZrO_2$ films the Ar IAD increases the average refractive index decreases the negative inhomogeneity of refractive index and reverses to the positive inhomogeneity. The optical properties result from improved packing density and denser outer layer next to air The Ar-ion bombardment also induces the changes in microstructure of $ZrO_2$ films such as the preferred (111) orientation of cubic phase increase in compressive stress and reduction of surface roughness. Inhomogeneous refractive index SiOxNy films were also prepared by nitrogen IAD and variable refractive index of $SiO_xN_y$ film was applied to fabricate a rugate filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1734-1737
• /
• 1997

The conventional fire detection devices are operated after a processed fire phase, which are sensing only a high density of somke level or high temperature heat. They are not so precision to detect a fire in the early phase to protect the facility form the fire. We need to develope a new high precision smoke detection system to keep expensive industrial facilities most reliably form fire. A new optical precision smoke detection system was developed. It monitors very low level density of smoke particles in the air. It is operated continously through many years without a stop or any malfunction. The developed precision smoke detection system will be installed in important industrial facilities, such as power plants, underground common tunnel, main control rooms, computer rooms etc.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1391-1396
• /
• 2014

In the present study, ten metal free non-linear optical (NLO) compounds have been designed. These compounds have designed by structural modification of (2-cyano-5-(4-(phenyl(4-vinylphenyl)amino)phenyl) penta-2,4-dienoic acid (TC4). Density functional theory was used for structure optimization and determination of photo-physical properties. These compounds contain triphenylamine as electron-donor and cyanoacrylic acid as acceptor. Five ${\pi}$-spacers are used to connect the donor and acceptor. Two auxiliary donors are also used to assist the donor. Results of this study indicate that stronger electron-donating auxiliary groups and longer ${\pi}$-conjugation enhance NLO response. Major absorption peaks of all systems were in the visible region. These absorption peaks are associated with the ${\pi}-{\pi}^*$ transitions of the entire molecule. From calculations it is clear that all system will be good NLO material. The present calculations will provide new ways for experimentalists to synthesize high-performance NLO material.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.4
• /
• pp.288-297
• /
• 2000

To understand the effect of radish on growth of food born microorganisms, mashedflesh radishes were extracted by using acetone and distilled water. Their effect was assayed by measuring the optical density of cultural broth of food born microorganisms. In the experiment, seven strains of yeast were used as the test organism. Acetone extract inhibited growth of the cells of L. plantarum, L. sake and Danmuji film yeast. Growth of the film yeast was drastically inhibited in the concomitant presence of 0.03% extract, while other microbes such as L. faecalis, P. pentosaceus, B/ subtilis and E. coli grew by succeeding cultivation for 4 to 8 hour after addition of the extract. Water extract, on contrast to acetone extract, at he concentrations of 0.1∼1.5% stimulated the growth of lactic acid bacteria. Culture of L. faecalis and L. sake showed an optical density higher than that of control by 40∼50 times. The effect was not so apparent against E. coli, S. aureus and Danmuji film yeast.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.244-247
• /
• 2000

This paper deals with methods for partial response maximum-likelihood (PRML) detection and crosstalk cancellation. In accrodance with the demand for increased recording density, 20 gigabyte (Gbyte) digital versatile disk (DVD) ROM channel is considered. Channel is modelled to be close to real optical channel using DIFFRACT$\^$TM/. After comparing the spectral characteristics of various PR polynomials, P(D)=1＋D＋D$^2$＋D$^3$is proposed as a target PR. The performance of the system is illustrated under the condition that the readout signal is degraded by crosstalk, radial tilt and nonlinear distortions in optics. The experimental results show that crosstalk and nonlinear distortions degrade performance by about 2dB, respectively. We also show that when radial tilt is added to the crosstalk, the performance degradation assumes quite significant proprotions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.1
• /
• pp.7-11
• /
• 2002

The print quality of a ink jet printer is generally affected by three major components of the printing process: printer, ink formulation, and paper. The result of this study indicated that the surface sized paper with oxidized starch and cationic starch differed ink jet print quality in terms of ink spread and black optical density of the print image. Paper properties, like air permeability and siting degree, which may influence the ink jet printing were also measured. It was found that black print quality was controlled by starch level and ionic charge on the paper surface. Cationic surface sizing starch improved black ink jet print quality.