• Journal of the Optical Society of Korea
• /
• 제8권3호
• /
• pp.99-103
• /
• 2004

This paper describes the optimal design of an AWG spectrum to meet various specifications and improve some physical parameters. The objective function is the norm of the difference between design parameters and target values. To obtain the design parameters, the Fourier model is employed and the design variables arc spacing of array waveguide, width of array waveguide, optical path difference, and focal length. The (1+1) Evolution Strategy is employed as the optimization tool. The optimization procedure is applied to a 16-channel AWG and the optimized design variables will considerably improve the system performance.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.55-55
• /
• 2003

Recently, with the rapid development of the waveguide division multiplexing (WDM) systems for large capacity and flexibility of information network, the broad band 1.5$\mu\textrm{m}$ erbium-doped waveguide amplifier (EDWA) become important. The main factors affecting the performance of sol-gel-based waveguides are non-radiative relaxation channels due to rare-earth concentration quenching and to vibration of the OH groups Therefore, the sol-gel process has to be carefully controlled in order to minimize the residual OH content.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.70-75
• /
• 2012

An optimization methodology for designing a dielectric-filled plasmonic slot waveguide is presented. The genetic algorithm combined with a rigorous analysis based on the finite element method is used to optimize a nano-scaled plasmonic slot waveguide to have high mode confinement and a long propagation length, for which the objective function is defined as a figure of merit combining both propagation parameters.

• ETRI Journal
• /
• 제29권6호
• /
• pp.811-813
• /
• 2007

We report on a ridge waveguide laser diode with laterally tapered waveguides fabricated in a single growing step using a double patterning method. In this structure, nearly constant output power is obtained with the change of the lower tapered waveguide width, and the facet power ratio of 1.4 to 1.5 is observed over the current range. The asymmetric facet power property is also investigated.

• Journal of the Optical Society of Korea
• /
• 제14권3호
• /
• pp.277-281
• /
• 2010

We propose a design and optimization method for a dielectric-loaded surface plasmon polariton waveguide using a genetic algorithm. This structure consists of a polymer ridge on top of two layers of substrate and gold film. The thickness, width and refractive index of the ridge are designed to optimize the figures of merit including mode confinement and propagation length. The modal analysis combined with the effective index method shows that the designed waveguide exhibits a fundamental propagation mode with high mode confinement while ensuring that the propagation loss remains relatively low.

• Journal of the Optical Society of Korea
• /
• 제17권3호
• /
• pp.242-248
• /
• 2013

Full color holographic optical element fabrication using a photopolymer is proposed for a waveguide-type head mounted display. The fabricated full color holographic optical elements can be attached to the waveguide to replace the conventional couple-in and couple-out optics in the head mounted display. To implement the system, this study analyzed the optical characteristics of the photopolymer using three lasers (red, green and blue). Considering the color uniformity, a new laminated structure for a full color holographic optical element was also designed. The proposed system was confirmed experimentally.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.9-14
• /
• 2011

In this study, the internal structure of an optical waveguide embedded in a flexible optical circuit board is observed with a confocal microscope. In order to increase the light reflection from an internal material interface with a very small index difference, and thus enhance the signal contrast, a theta microscopy scheme has been integrated into a conventional confocal microscope, and a high NA oil-immersion lens has been used. The interface reflectivity is increased from roughly 0.0015% to 0.025% by the proposed method, and the internal structure can thus be successfully measured.

• 한국광학회지
• /
• 제34권6호
• /
• pp.235-240
• /
• 2023

종단방출형 광위상배열장치에 주입된 광신호는 장치 내부의 도파로를 따라서 전파되어 안테나 끝단에서 외부로 방출되는데 이 경계면에서 반사와 산란이 발생하여 광신호의 방출효율이 감소하게 된다. 본 연구에서는 이 방출효율을 증가시키기 위하여 끝단으로 갈수록 폭이 가늘어지는 도파관 안테나를 연구하였다. 도파로는 폭이 2 ㎛, 높이가 0.5 ㎛인 실리콘 나이트라이드를 고려하였으며, 도파로의 끝단을 폭이 가늘어지는 도파관 안테나 구조로 변경한 결과 신호의 방출효율은 78%에서 96.3%까지 증가하고 반사율은 22%에서 3.7%까지 감소하는 것을 확인하였다. 이를 통해 종단방출형 광위상배열장치의 광신호의 세기를 증가시킬 수 있을 뿐만 아니라, 도파로를 따라 반사되는 후방반사에 따른 노이즈의 영향도 줄일 수 있음을 확인하였다.

• ETRI Journal
• /
• 제29권6호
• /
• pp.808-810
• /
• 2007

We demonstrate 10 Gbps optical signal transmission via long-range surface plasmon polaritons (LR-SPPs) in a very thin metal strip-guided geometry. The LR-SPP waveguide was fabricated as a 14 nm thick, 2.5 ${\mu}m$ wide, and 4 cm long gold strip embedded in a polymer and pigtailed with single-mode fibers. The total insertion loss of 16 dB was achieved at a wavelength of 1.55 ${\mu}m$ as a carrier wave. In a 10 Gbps optical signal transmission experiment, the LR-SPP waveguide exhibits an excellent eye opening and a 2.2 dB power penalty at $10^{-12}$ bit error rate. We confirm, for the first time, that LR-SPPs can efficiently transfer data signals as well as the carrier light.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.197-205
• /
• 1996

Four types of three-waveguide optical switches are analyzed by measns of the coupled mode theory. Assuming that three proximate waveguides of an optical switch are identical and equally spaced, we examine the switching behavior for both cases where an incident beam is launched into 1) the outer waveguide, 2) the center waveguide. For each beam-launching case, switching voltage is applied so that three waveguides refractive indices be detuned 1) symmetric, 2) anti-symmetric. It is concluded that only three types of optical switches out of four an perform the switching operation. We derive the switching conditions for ach of three possible types and draw the corresponding switching diagrams.