• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.65-72
• /
• 2010

We propose the asymmetric 2.5Gbps/622Mbps PON(Passive Optical Network) in order to reduce the bandwith of filter at receiver with inverse RZ(Return to Zero) code coded downstream and NRZ(Non Return to Zero) upstream re-modulation. I theoretically analyze BER(Bit Error Rate) performance and the power sensitivity with the optimal threshold level by performing simulation with MATLAB according to the types of downstream data. The results have shown that the optimal threshold level at the optical receiver could be saturated at 0.33 as the optical received power increase more than -26dBm to keep $10^{-12}$ of BER to a minimum. Also the power sensitivity is more improved by about 3dB by fixing the threshold level at 0.33 than the conventional receiver. The proposed system can be a useful technology for optical access networks with asymmetric upstream and downstream data rates because the optical receiver can be used without controlling threshold levels and that does not require a light source in optical network unit (ONU) and its control circuits in the optical line termination (OLT).

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.406-408
• /
• 2005

A passive Optical Network (PON) is famous for the most cost-efficient solution among the optical networks. This is because there is no active device between a central office and subscribers. A wavelength division multiplexing (WDM) offers each subscriber to feel unlimited bandwidth. A WDM-PON, however, has a cost problem that WDM-PON is used commercially. To solve this trouble, it is surveyed that a Sub-Carrier Multiplexing (SCM) used in a WDM-PON increases the number of subscribers. The performance of WDM/SCM-PON varies with various noises. The several FEC Codes can reduce the effects of noise and improve the performance of the system. Thus, Choosing a suitable FEC code is important work. This paper describes that a Reed-Solomon (RS) code is the most suitable code for WDM/SCM-PON at the object of 100 Mbps and $10^{-9}$ BER

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.357-364
• /
• 2014

In this paper deals with PON Remote monitoring solution using Reflecting Filter. The current FTTH-PON can not be monitored in real time that Optical cable fault and Quality degradation of Splitter. To solve this problem, Monitoring can make Feeder Network and Splitter that Reflecting filter development using the basic structure of Fiber Bragg grating. Reflecting Filter is Quality Monitoring System shall provide tools for user to view and analyze degradation of cables and splitter in particular predict any gradual component degradation(Optical cable bending, splice, connector, etc) before it becomes service impacting. The Reflecting Filter solution is splitter down and confirm the fault location of optical cable and it will send central control station can be monitored system an alarm to the OLT. In other words, wavelength side branches Mating existing communication affairs (Coupler) using the core of one optical wavelength for live monitoring two wavelengths and sends the subscriber side modem and aggregation switch device remotely using a reflective optical line filter monitoring the study of the system. this study can development of Reflecting filter improve the average processing time of Optical cable fault and efficient Maintenance of the network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.813-821
• /
• 2008

In recent year, several types of PON(Passive Optical Networks) have been adopted into the subscriber loops for the high speed subscriber lines to meet the needs of some applications based on the Internet and the rapid increase of the Internet users. GPON(Gigabit PON) is a typical access network technology of these PONs which adopt the DBA(Dynamic bandwidth Allocation) scheme in order to transmit upstream traffic efficiently. In this paper, we introduce the gated polling system with a two-stage queue in order to analyze the delay performance of the DBA scheme in a GPON. We use a continuous time queueing model for deriving the mean cycle time and for obtaining the mean packet delay. We give some numerical results to investigate the delay performance for the symmetric polling system with statistically identical stations.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.229-235
• /
• 2019

As the demand for broadband multimedia including the Internet explosively increases, the advancement of the subscriber network is becoming the biggest issue in the telecommunication industry due to the surge of data traffic caused by the emergence of new services such as smart phone, IPTV, VoIP, VOD and cloud services. In this paper, we have developed WDM(Wavelength Division Multiplexing)-PON(passive optical network) based on the 1-Gigabit Reach Externder (RE) technique to reduce optical core. Particularly, in order to strengthen the market competitiveness, we considered low cost, miniaturization, integration technique, and low power of optical parts. In addition, we have developed a batch system by integrating all techniques for reliability, remote management through the development of transmission distance extension and development of capacity increase of optical line by using RE technology in existing PON network. Based on system interworking with existing commercial 1G PON devices, it can be worthy of achievement of wide nationalization and optical core reduction by using this developed system. Based on these results, we are studying development of 10G PON technology.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.69-76
• /
• 2010

We describe an all-optical circuit which recognizes the header information of packet-by-packet in the access networks based on FTTH. The circuit's operation is confirmed by an experiment in the recognition of 3 and 4 header bits. The output from the header recognition circuit appears in a signal assigned in the time axis according to the header information. The recognition circuit of header for self-routing has a very simple structure using only delay lines and switches. The circuit is expected that it can be constructed of the high reliability and the low cost. Also, the circuit can solve the problems of the power loss and private security which is the weak point of the TDM-PON method by being established a unique transmission line to each subscriber.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.411-417
• /
• 2000

The waveguide structure effects of a spot-size converter (SSe) of a $1.3\mu{m}$ FP(Fabry-Perot)-LD(Laser Diode) were investigated. Its coupling efficiency and alignment tolerance with a single-mode fiber (SMF) were carefully examined by using a 3dimensional BPM (Beam Propagation Method). It was shown that the fOlmation of enough length of straightened waveguide around the end of the sse region can substantially improve the optical coupling efficiency for a vertically tapered sse. In contrast, a down-taper structure for a laterally tapered sse has superior characteristics to an up-tapered one. We suggested good sse structures which can provide a high coupling efficiency as well as a large alignment tolerance with an .SMF. .SMF.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.379-384
• /
• 1995

In order to construct B-ISDN, it is inevitable to introduce optical fiber of low loss and wide bandwidth. Coincidently, high count optical fiber cable is solely important to form optical subscriber network. The best structure of high count optical fiber cable to achieve multi-splicing as well as high density at the same time is the one of taking optical ribbon as a unit of accomodation. However, since optical ribbon has its own width. optical loss due to length difference during the bending of ribbon cable unit occurs in relatively easy way. Therefore, care should be taken during its manufacturing and storage. In t\1::; paper, strain, bending radius and lateral pressure of each fiber in ribbon due to the bending of ribbon cable unit are caculated theoretically. Hence, we have measured optical loss of each fiber as function of unit bending radius, when we bent the ribbon cable unit on the various reel. We found that the result accords well with the theoretical analysis. The result shows the importance to determine proper radius of reel used in ribbon cable manufacturing and storage. orage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.153-161
• /
• 2005

In a multi-channel network based of wavelength division multiplexing (WDM) technology, an efficient protocol is needed in order for the transmitter and receiver to be tuned to the same wavelength during message transmission time. This paper proposes a priority-based reservation protocol that can efficiently support variable-length messages that require different QoS requirements. In this proposed protocol, high-priority nodes can reserve the data channel before low-priority nodes. However, once a node reserves a data channel successfully, it can persistently use the reserved channel till message transmission is finished regardless of the priority of the node. Moreover, the protocol can operate independently of the number of nodes, and any new node can join the network anytime without requiring network re-initialization. The protocol is analyzed with a finite population model and the throughput-delay characteristics are investigated as performance measures.

• Electronics and Telecommunications Trends
• /
• v.20 no.6 s.96
• /
• pp.77-86
• /
• 2005

인터넷, HDTV, VoD 등 통신 및 방송 수요의 증가에 따라 가입자망까지 광섬유를 포설하는 이른바 FTTH의 구현이 현실화되고 있다. 광가입자망 기술은 전달망과 가입자간을 연결하기 위한 전송(선로종단, 망종단) 장치와 전송매체 등의 설비로 구성되며, 고속 액세스 전송은 일반적으로 가입자에게 수 Mb/s 사용대역을 제공하는 기술을 말하는 것이다. 특히 가입자망에서 수백 Mb/s 이상의 가입자 사용 대역을 제공할 수 있는 것은 광통신 기술만이 가능하다. 세계적으로 광가입자망의 구축은 이미 2002년부터 시작되어 미국의 경우 SBC, Verizon을 중심으로 FTTx 서비스를 시작하여 2005년5월 현재 37개 주의 217곳에서 서비스가 진행중이며 일본의 경우 e-Japan Project로2007년까지 FTTH 천만 가입자를 목표로 2004년 말에 이미 200만 가입자를 돌파하는 등 광가입자망 분야에서는 세계적으로 가장 앞서가고 있는 실정이다. 한국의 경우전세계적으로 초고속 인터넷 보급률 1위로 기존의 VDSL에 의한 초고속 전송망이 이미 미국, 유럽 등의 광가입자망 대역폭과 근접한 속도를 보이고 있어 FTTH 구축은 오히려 늦어지고 있는 실정이다. 그러나 향후 방송/통신 융합 등 급격히 늘어날 대역폭요구를 수용하기 위해서는 광가입자(FTTH) 기술로의 전개가 필수적이고 이를 수용할수 있는 광가입자망 기술에 대해 살펴 본다.