• 한국광학회지
• /
• 제27권5호
• /
• pp.181-187
• /
• 2016

본 연구에서는 단일모드 사각형 링 공진기에 테이퍼-스텝 구조를 적용하여 단 방향 발진을 구현하였으며, 다양한 테이퍼-스텝 구조 변수를 갖는 소자를 제작하여 그 특성을 분석하였다. 소자는 InP기판을 기반으로 성장된 InGaAsP/InGaAs 다중 양자 우물구조의 반도체에 제작하였으며, 제작된 소자의 출력과 광 손실을 측정하였다. 이를 바탕으로 주어진 반도체 에피 구조와 단일모드 사각 링 공진기에서의 최적화된 구조 변수를 도출할 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.157-161
• /
• 2012

This work reports the stability of the resonant characteristics in multimode interferometer coupled square ring semiconductor cavities. Based on the analysis of single square ring cavities, the single mode operations in the multimode interferometer coupled ring cavities are analyzed and the devices are demonstrated on the semiconductor multiple quantum well epitaxial structure. By varying the lasing conditions such as substrate temperature and input pump power, single resonant mode operations are also observed.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.371-375
• /
• 2013

To improve the utilization efficiency of solar energy, a new solar optical concentrating system composed of a parabolic reflector with a square cross-section, a hyperbolic reflector with a square cross-section and two converging convex lenses has been designed. The proposed method can simultaneously focus and shape sun light into a square pattern on the solar panel. In addition, the total reflection property of photonic crystal within the range of the visible sunlight spectrum has been analyzed. Finally, the relationship between solar concentrating multiples and the diameter of the primary mirror has been discussed.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.863-872
• /
• 2012

The squareness measurement of driving axes of a machine tool is very important to evaluate the performance of the machine. Laser interferometer measurement system is one of the most reliable equipment to measure the squareness. However, squareness measurement using laser system with an optical square result in restriction of straightness optics setup and Abbe's offset. This offset combines with angular errors during the motion of an axis to cause Abbe's error. In addition, the difficulty in optical square setup causes restriction of other optics and limitation of measurable range. In this paper, mathematical approaches are presented to eliminate the Abbe's error and to estimate squareness for full range by using the best fit of straightness data measured without an optical square. Experiments for squareness measurement of 3 axis machine tool were conducted and the proposed techniques were used for squareness evaluation with elimination of Abbe's error and squareness estimation for the full travel range.

• 한국광학회지
• /
• 제20권1호
• /
• pp.41-47
• /
• 2009

다중모드 간섭기를 이용한 반도체 이중사각형 링 공진기에서의 단일 파장 모드 발진특성을 관찰하였다. 실험에 사용된 공진기의 에피택시는 발진 중심파장이 $1.55{\mu}m$인 InGaAsP-InP 다중양자우물 구조를 활성층으로 사용하여 제작되었다. 공진기의 구조는 다중모드 간섭기를 결합기로 이용한 이중사각형 링 공진기이며 발진특성을 측정하였다. 여러 가지 구조 변수를 즉 공진기의 구조 및 크기, 다중모드 간섭기의 길이를 변화시키며 실험을 진행하였다. 실험 결과 다양한 크기와 구성에서 단일파장모드선택 특성이 잘 나타남을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집
• /
• pp.21-23
• /
• 2004

We report experimental results demonstrating a novel metal defined polymer optical waveguide with a low loss in electro-optic polymers for the first time. The polymer optical waveguides are created using a metal film on the top of upper cladding without any conventional etching process. The fabricated waveguides have an excellent lateral optical mode confinement at both 1.31 ${\square}m$ and 1.55 ${\square}m$ wavelength, resulting in a fiber-to lens optical insertion loss of ~ 7 dB at 1.55 ${\square}m$ and ~4.5 dB at 1.31 ${\square}m$ wavelength in a 3.5cm total length for TM polarizations, respectively. We also present the optical loss dependence of the waveguide as a function of optical wavelengths. These results may be used in the complex design of integrated polymer optical circuits that need simpler and cheaper fabrication process.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.578-583
• /
• 2014

Optical pick-up is a core component for data read/write operations in optical disc drives, and an optical pick-up performance evaluator is an instrument used to analyze the overall performance of an optical pick-up. Due to inevitable errors in an analog measurement circuit, resultant evaluation data is not guaranteed to be accurate. In this paper, a calibration method for an optical pick-up performance evaluator is proposed to ensure evaluation accuracy. Measured data is corrected by a 1st order correction function, and a calibration process based on least-square method is utilized to obtain correction coefficients of the correction function. The proposed calibration method is applied to experiments, and enhanced accuracy is presented with resultant evaluation data.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.232-236
• /
• 2011

We analyze the linear equalizers used in optically amplified on-off-keyed (OOK) systems to combat chromatic dispersion (CD) and polarization mode dispersion (PMD), and we derive the mathematical minimum mean squared error (MMSE) performance of these equalizers. Currently, the MMSE linear equalizer for optical OOK systems is obtained by simulations using adaptive approaches such as least mean squared (LMS) or constant modulus algorithm (CMA), but no theoretical studies on the optimal solutions for these equalizers have been performed. We model the optical OOK systems as square-law nonlinear channels and compute the MMSE equalizer coefficients directly from the estimated optical channel, signal power, and optical noise variance. The accuracy of the calculated MMSE equalizer coefficients and MMSE performance has been verified by simulations using adaptive algorithms.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.36-37
• /
• 2003

원형 미소공진기는 Q값이 매우 큰 공진모드가 존재할 수 있어, 광집적회로 등의 초저문턱 미소공진기 레이저에 적용되는 연구가 활발하게 수행되고 있고, 광통신용 Add／Drop Filter, 전-광 (electrical to optical) 직접 변환소자 등의 광소자 분야에 활용하려는 연구가 진행되고 있다. 한편 미소공진기 연구는 원형에서 더 나아가 square, quadrupole, spiral, mismatched two cavities등으로 확장되고 있다. (중략)

• 소성∙가공
• /
• 제19권8호
• /
• pp.474-479
• /
• 2010

Newly suggested hybrid LED package can reduce the number of LED processes and enhance light efficacy in virtue of its integrated optical patterns. Square-type pyramid pattern was chosen for the integrated optical pattern in this study, and it was proved that the pattern enhances illuminance about three times and luminance about two and half times by optical simulation. Square-type pyramid patterns of 0.02mm height and 0.04mm pitch were successively machined on a copper mold which is necessary for imprinting the integrated pattern. Hybrid LED package with integrated optical pattern will be manufactured with ultra-fine machined mold in future study.