• 제목/요약/키워드: Optical Properties

검색결과 6,102건 처리시간 0.035초

솔-젤법에 의한 CuCl 미세결정이 분산된 비선형 광학유리의 제조 및 광특성 (Preparation and Opticaa Properties of CuCl Nanocrystallites Dispersed Nonlinear Optical Glass by Sol-Gel Process)

  • 송석표;한원택;김병호
    • 한국세라믹학회지
    • /
    • 제34권9호
    • /
    • pp.941-948
    • /
    • 1997
  • CuCl nanocrystallites dispersed nonlinear optical silica and borosilicate glasses were fabricated by sol-gel process. CuCl powder was dissolved in TEOS(Si(OC2H5)4) and TMB((CH3O)3B), precursors of silica and borosilicate glasses, with ethanol, water and HCl, and precipitated through the heat treatment in the matrix glass. The optical properties of CuCl doped glasses were measured using the spectrophotometer at room temperature and low temperature(77K); Z1, 2 and Z3 exciton peaks from the absorption spectra, were observed at about 370 nm and 380 nm, respectively. The average radius of nanocrystallites, calculated from the blue shift of Z3 excitons, was measured according to annealing temperature and time. The precipitation temperature of CuCl nanocrystallites was decreased when boron was added to silica glass. Increase of annealing temperature and time made average radius of nanocrystallites saturated about 2 nm.

  • PDF

DVD-RAM 기판의 복굴절, Radial-tilt 및 전사성 향상을 위한 사출압축성형공정 최적화 (An Optimum Design of Replication Process to Improve Birefringence, Radial-tilt and Land-Groove Structure in DVD-RAM Substrates)

  • 이남석;성기병;강신일
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집C
    • /
    • pp.438-444
    • /
    • 2001
  • The objective of this study is to provide a simple methodology to find optimum processing conditions to fabricate sub-micron structured DVD-RAM substrates with superb optical and geometrical properties. It was found that the birefringence, which is regarded as one of the most important optical properties for an optical disk, was very sensitive to the mold wall temperature history. Also, the integrity of the replication, represented by the land-groove structure and the radial tilt were influenced by the mold temperature and the compression pressure. A set of optimum conditions were obtained by applying Design of Experiment and the objective functions composed of three different objectives.

  • PDF

Structure, Optical and Electrical Properties of AI-doped ZnO Thin Film Grown in Hydrogen-Incorporated Sputtering Gas

  • Kim, Kyoo-Ho;Wibowo, Rachmat Adhi;Munir, Badrul
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.154-159
    • /
    • 2005
  • Low RF power density was used for preparing transparent conducting AI-doped ZnO (AZO) thin films by RF Magnetron Sputtering on Corning 1737 glass. The dependence of films' structural, optical and electrical properties on sputtering gas, film's thickness and substrate temperature were investigated. Low percent of incorporated H2 in Ar sputtering gas has proven to reduce film's resistivity and sheet resistance as low as $4.1\times10^{-3}{\Omega}.cm$. It also formed new preferred peaks orientation of (101) and (100) which indicated that the c-axis of AZO films was parallel to the substrate. From UN-VIS-NIR Spectrophotometer analysis, it further showed high optical transmittance at about $\~ 90\%$ at visible light spectra (400-700nm).

  • PDF

Non-Destructive Evaluation of Material Properties of Nanoscale Thin-Films Using Ultrafast Optical Pump-Probe Methods

  • Kim, Yun-Young;Krishnaswamy, Sridhar
    • 비파괴검사학회지
    • /
    • 제32권2호
    • /
    • pp.115-121
    • /
    • 2012
  • Exploration in microelectromechanical systems(MEMS) and nanotechnology requires evaluation techniques suitable for sub-micron length scale so that thermal and mechanical properties of novel materials can be investigated for optimal design of miro/nanostructures. The ultrafast optical pump-probe technique provides a contact-free and non-destructive way to characterize nanoscale thin-films, and its ultrahigh temporal resolution enables the study of heat-transport phenomena down to a sub-picosecond regime. This paper reviews the principle of optical pump-probe technique and introduces its application to the area of micro/nano-NDE.

Optical properties of amorphous $Si_xC_yN_z$ ternary thin films prepared by plasma enhanced chemical vapor deposition

  • Zhang, Z.H.;Fan, X.J.;Guo, H.X.;Zhang, W.;Zhang, C.Y.;Luo, F.Y.
    • 한국진공학회지
    • /
    • 제7권s1호
    • /
    • pp.190-196
    • /
    • 1998
  • Amorphous ternary $Si_xC_yN-z$ thin films were obtained by plasma enhanced chemical vapor deposition(PECVD) using $N_2, SiH_4 \;and \;C_2H_4$ as the reaction sources. The chemical state were characterized by x-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy(FTIR). The optical properties of the thin films were investigated by UV-visible spectrophotometer and ellipsometer, and the optical band gaps of thin films were determined from corresponding transmittance spectra following Tauc equation.

  • PDF

Electrical and Optical Properties of Phosphorescent Organic Light-Emitting Devices with a TAPC Host

  • Kim, Tae-Yong;Moon, Dae-Gyu
    • Transactions on Electrical and Electronic Materials
    • /
    • 제12권2호
    • /
    • pp.84-87
    • /
    • 2011
  • We fabricated phosphorescent organic light-emitting devices with a 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) host layer. Two kinds of devices, one of ITO/TAPC/TAPC:FIrpic/TAZ/LiF/Al (device A) and one of ITO/TAPC:FIrpic/TAPC/TAZ/LiF/Al (device B), were prepared to investigate electrical and optical properties. Iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$]picolinate (FIrpic) and 3-(4-biphenylyl)-4-phenyl-5-(4-tert-butylphenyl)-1,2,4-triazole (TAZ) were used as a blue phosphorescent guest material and an electron transport layer, respectively. The TAPC layer in device B strongly contributes to whitish emission, higher driving voltage, and lower current efficiency characteristics compared with device A. The mechanisms of these electrical and optical characteristics of the devices were investigated.

태양전지용 CdS 박막의 제조 조건에 따른 전기적 광학적 특성에 관한 연구 (A Study on the Electrical and Optical Properties of CdS Thin Films Deposited with Different Conditions for Solar Cell Applications)

  • 이재형
    • 한국전기전자재료학회논문지
    • /
    • 제21권7호
    • /
    • pp.620-628
    • /
    • 2008
  • Cadmium sulphide (CdS) thin film, which is used as a window layer of heterojunction solar cell, on the glass substrate was deposited by vacuum evaporation. Effects of deposition conditions such as the source and substrate temperature on electrical and optical properties of CdS films was investigated. As the source temperature was increased, the deposition rate of CdS films was increased. In addition, the optical transmittance and the electrical resistivity of CdS films were decreased as the source temperature was increased. This results were attributed to the increase of excess Cd amount in the film. The crystal structure of CdS films exhibited the hexagonal phase with preferential orientation of the (002) plane. As the substrate temperature was increased, the crystal structure of CdS films was improved and the resistivity of the films was increased due to the decrease of excess Cd in film.

극화된 고분자에서 비선형 광학특성의 완화 (The Relaxation of Nonlinear Optical Properties in a Poled Polymer)

  • 정치섭
    • 한국전기전자재료학회논문지
    • /
    • 제23권6호
    • /
    • pp.491-496
    • /
    • 2010
  • The relaxation behavior of aligned electric dipoles in a mixed polymer of P2ANS with P(VDF-TrFE) is studied with optical second harmonic generation (SHG). In this work, a macroscopic noncentrosymmetry of the spin coated film was achieved by an electrical poling. The relaxation of induced polar order of nonlinear optic(NLO) chromophores after poling leads to an insufficient long-term stability of NLO properties. In this work, we develop a new technique to suppress such kind of dipole relaxation in a poled polymer. We found that the poled dipoles in a NLO polymer were effectively immobilized by the internal electric field created by a thermally annealed ferroelectric polymer. The long-term stability in a mixed system of NLO polymer/ferroelectric polymer was successively accomplished by a series of thermal treatments applied to the mixed polymer system at a temperature of $140^{\circ}C$ for at least 1hour after poling.

플라즈마 중합법에 의한 유기 박막의 광학 특성에 관한 연구 (II) (A Study on the Optical Properties of the Organic Thin Films by Plasma Polymerization(II))

  • 최충석;정윤;이덕출;박구범;박상현;박복기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1992년도 하계학술대회 논문집 B
    • /
    • pp.875-878
    • /
    • 1992
  • In this study, We made use of inter-electrode capacitively coupled type plasma polymerization apparatus in order to make the organic optical thin films. We adopted in Benzen. Vinyl-Pyridine and Styrene, which have optical function in the organic world and manufactured double later. It is examined optics properties by it respectively. At the middle wave length as 550[nm], the transmittance is double layer smaller than one of single layer. The refractive index with wave length is various from 1.55 to 1.65. Then, it is known that measured results are valid because the extinction coefficient(K) is about $10^{-4}$ for variation of refractive index.

  • PDF

Se 전구체 함량 따른 CdSe 양자점 형광체의 발광특성 (Luminescent Characteristics of CdSe Quantum Dot Phosphor Depending on Se Precursor Ratio)

  • 엄누시아;김택수;좌용호;김범성
    • 한국분말재료학회지
    • /
    • 제19권6호
    • /
    • pp.442-445
    • /
    • 2012
  • The quantum dots (QD) have unique electrical and optical properties due to quantum dot confinement effect. The optical properties of QDs are decided by various synthesis conditions. In a prior QDs study, a study on the QDs size with synthesis condition such as synthesis time and temperature is being extensively researched. However, the research on QDs size with composition ratio has hitherto received scant attention. In order to evaluate the ratio dependence of CdSe crystal, synthesis ratio of Se precursor is changed from 16.7 mol%Se to 44 mol%Se. As the increasing Se ratio, the band gap was increased. This is caused by red shift of emission. We confirmed optical property of CdSe QDs with composition ratio.