• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.191-196
• /
• 1995

Using sol-gel processing method, thin films of lathanum modified lead titanate(PLT) on Corning 7059 glass were prepared. A differential thermal analysis (DTA/TG) curve of gel powder and infrared spectra (FT-IR) of the films were measured to estimate residual organices in them. The heat-treated films were characterized by X-ray diffraction(XRD). Microstructures of the films were observed by a scanning electron microscope (SEM). Optical properties of the films were determined by a UV-VIS spectrophotometer. The waveguiding properties and optical attenuation were measured with the end coupling method and the cut back method. Effects of the drying conditions on the transmittance and the propagation loss of the films were investigated. Experimemtal results showed that the content of residual organics in the film decreased as the drying temperature of the film increased. As the La content of the film increased, the grain size decreased and the transmittance increased. The transmittances of the films increased with the increasing of the drying temperature. The propagation losses in the film decreased as the drying temperature increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.119-122
• /
• 2001

ZnO thin films on (001) sapphire substrates have been deposited by pulsed laser deposition(PLD) technique at the oxygen pressure of 350 mTorr. In order to investigate the effect of post-annealing treatment with oxygenn pressure of 350 mTorr on the optical property of ZnO thin films, films have been annealed at various substrate temperatures after deposition. After post-annealing treatment in the oxygen ambient, the optical properties of the ZnO thin films were characterized by PL(Photoluminescence) and structural properties of the ZnO were characterized by XRD, and have investigated structural property and optical property for application of light emission device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.135-138
• /
• 2001

We report the structural ,optical and electrical properties of ZnO thin films depending on the variation of the film thickness. The properties of the films deposited on sapphire (001) substrates using a pulsed laser deposition technique (PLD) were characterized with XRD, hall measurement and photoluminescence (PL). In our study, the increase of the thickness of ZnO thin films shows the improvement of the structural and optical properties. The electric properties of the films were also well matched with the structural and optical properties

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.284-285
• /
• 2006

We prepared ITO thin films using Facing Targets Sputtering(FTS) method with various input currents at room temperature on Polycarbonate(PC) and Polyethersulfon(PES) substrates. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were measured. The electrical, optical, structural characteristics of ITO thin films were evaluated by Hall Effect Measurement(EGK), X-Ray Diffractormeter(Rigaku) and UV-VIS spectrometer(HP) respectively. From the results, we obtained ITO thin films that have a resistivity of $4{\times}10^{-4}[{\Omega}-cm]$ on PC and $527{\times}10^{-4}[{\Omega}-cm]$ on PES. Also, the optical transmittances of all samples were over 80%.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.314-318
• /
• 1989

Thin films of undoped and Ga-doped zinc oxide have been prepared by rf sputtering. The films deposited on substrates, which have a columnar structure with the c-axis perpendicular to the substrate surface, consist of very small crystal grains (500-1000 ${\AA}$). Considering doping effects, the electrical resistivity of Ga-doped films decreased by an order of $10^3$ compared to undoped films and the optical transmission was above 80% in the visible range and the optical band gap widened as the Ga content increased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.600-604
• /
• 2005

We studied that structural and optical properties of ZnO films depend on oxygen contents. ZnO films were deposited on Si (111) substrates at room temperature by rf sputtering system and the thickness of films was 100 nm. The ZnO films were annealed in thermal furnace for 2 h at 800 and $900^{\circ}C$ in $H_2O,\;N_2$, and air ambient gases to control oxygen contents. We used AES, PL, XRD, AFM. As our result, crystal quality and luminescence improved until O/Zn is 1. However, when O/Zn ratio Is larger than 1, the structural and optical properties were getting worse.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1603-1605
• /
• 1996

We have studied the static electricity and optical retardation generated by rubbing the surfaces of polyimide (PI) and polyamide (PA) films. The static electricity increases with the rubbing strength (RS) and varies with the different PI films. We also investigated how the differences in the rubbing fabric affects the magnitude of the induced static electricity; the order of this effect is nylon > rayon > cotton. The induced static electricity is not only directly related to the values of the specific resistivity of the rubbed PI films, but also the RS and the ability of the rubbing fabric to generate and add a static electric charge. The order of the optical retardation produced by the rubbing fabraic on rubbed PI films is nylon > rayon > cotton, coinciding with the order of the generated static electricity.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.660-665
• /
• 1996

Thin films of indium oxide and indium tin oxide have been prepared by d.c. magnetron sputtering onto the fused silica substrates kept at 90, 200 and $300^{\circ}C$. In order to elucidate the optical absorption process in low energy region below 3 eV, we have analyzed the absorption coefficients obtained from reflectance and transmittance measurements for these films based on the Lucovsky model. It has been found for the first time that a defect center in the band gap is located at 0.8~1.4 eV below the Fermi level in all films and arises from oxygen vacancies in their films. The optical absorption in low energy region is explained to be dominated by the transition of electrons trapped at the positively charged (+2e) oxygen vacancies with s-like nature to the conduction band formed from the 5s-orbit in indium atoms.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.4
• /
• pp.199-202
• /
• 2011

Ga doped ZnO thin films were deposited with RF magnetron sputtering on glass substrate without intentional substrate heating and then the effect of post deposition annealing temperature on the structural, optical and electrical properties of the films was investigated. The post deposition annealing process was conducted for 30 minutes in a vacuum of $1{\times}10^{-3}$ Torr and the vacuum annealing temperatures were 150 and $300^{\circ}C$, respectively. As increase annealing temperature, GZO films show the increment of the prefer orientation of ZnO (002) diffraction peak in the XRD pattern and the optical transmittance in a visible wave region was also increased, while the electrical sheet resistance was decreased. The figure of merit obtained in this study means that GZO films which vacuum annealed at $300^{\circ}C$ have the highest optoelectrical performance in this study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.817-821
• /
• 2000

In this work, we have investigated the dependence of annealing temperature(T$\_$a/) on optical and electrical properties of amorphous hydrogenated SiC(a-SiC:H) films. The a-SiC:H films were deposited on corning glass and p-type Si(100) wafer by PECVD (plasma enhanced vapor deposition) using SiH$_4$+CH$_4$+N$_2$ gas mixture. The experimental results have shown that the optical energy band gap(E$\_$opt/)of the thin films annealed at high temperatures have shown that the graphitization of carbon clusters and micro-crystalline silicon occurs. The current-voltage characteristics have shown good electrical properties at the annealed films.