• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.19-23
• /
• 2006

Latching optical switches and optical logic gates AND and OR are demonstrated, for the first time, by the monolithic integration of a vertical cavity lasers with depleted optical thyristor structure, which have not only a low threshold current with 0.65 mA. but also a high on/off contrast ratio more than 50 dB. By simple operating technique with changing a reference switching voltage, this single device operates as two logic functions, optical logic AND and OR. The thyristor laser fabricated using the oxidation process achieved a high optical output power efficiency and a high sensitivity to the optical input light.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.09a
• /
• pp.29-34
• /
• 2005

A optical head unit for nano optical probe away was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.31-35
• /
• 2008

A rod-type aspheric lens collimator for the optical telecommunication system which shows high coupling efficiency and experiences small coupling loss for misalignment errors is designed. The working distance, thickness, and diameter of the rod-type aspheric lens are determined to be close to those of the GRIN lens collimator in order to replace the GRIN lens with the rod-type aspheric lens. Since the coupling loss mainly originated from the spherical aberration of the lens, the spherical aberration in the rod-type aspheric lens is reduced drastically, and it turns out that the coupling efficiency of the rod-type aspheric lens collimator is higher than that of the available collimators, such as ball lens, GRIN lens, and C-type lens collimators.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.126-130
• /
• 2003

The optical power transfer of TM modes in grating-assisted directional couplers (GADCs) with three-guiding channels is rigorously evaluated by defining a novel coupling efficiency amenable to the rigorous analytical solutions of modal transmission-line theory (MTLT). The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the period, the duty cycle, and wavelength.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.354-355
• /
• 2005

Indium tin oxide (ITO) thin film was polished by chemical mechanical polishing (CMP) by the change of process parameters for the improvement of electrical and optical properties of ITO thin film. Light transparent efficiency of ITO thin film was improved after CMP process at the optimized process parameters compared to that before CMP process.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.355-356
• /
• 2008

The light extraction efficiencies of GaN-based light-emitting diodes (LEDs) grown on differently patterned sapphire substrates were investigated by using the ray tracing method. It was found that angle of the pattern surface against the sapphire surface, the number of pattern per unit area were important structural factors for high extraction efficiency.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.73-79
• /
• 1999

Semiconductor optical switch modules of 1$\times$2, 1$\times$4, and 4$\times$4 types for 1550 nm optical communication systems were fabricated by using laser welding technique, embodying in 30-pin butterfly package. For better coupling efficiency between switch chip and optical fiber, tapered fibers of 10~15mm lens radii were used, which provided up to 60% optical coupling efficiency. With the help of new laser hammering process, we could recover the lost optical power almost completely up to average 82% of initially obtained power. The fabricated optical switch modules showed good thermal stability of less than 5% degradation even after 200 times thermal cycling test. The 2.5 Gbps optical transmission characteristics of the 4$\times$4 switch module showed low sensitivities of less than -30dB for all possible switching paths. The transmission penalties of 1$\times$2 switch module at $10^{-10}$ BER were 0.6dB and 0.7dB for 50Xm and 90 Km optical fibers, respectively.

• The Journal of the Korea Contents Association
• /
• v.6 no.7
• /
• pp.69-78
• /
• 2006

In this paper, we presents the efficiency and a transmission quality of the system which is composed of the optical elements from physical layer of the active optical ring network. For a simulation it will use the Transmissionmaker WDM and it will be able to observation a optical transmission quality of the optical transmission system. The active optical network is composed of two rings(main ring and sub-ring). It measures the BER(Bit Error Rate) quality which it follows node number from the sub ring and physical distance of the node. Performance analysis from the physical layer becomes the standard of the plan for the efficiency optimization of the active optical ring network. Consequently it will be able to compose the efficient optical transmission system which reflects the physical distance, a traffic demand quantity of each node and a number of users from actual network.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.295-303
• /
• 2017

In this paper, we have studied a method of forming a line beam using a UV LED. The existing linear-type UV LED curing optical system is composed of several cylindrical lenses, but problems such as optical system alignment, enlargement of the module, efficiency, etc. may arise in the future. As an alternative to these problems, a bar-type TIR lens having a freeform surface only in the y-axis direction is designed, to verify that it shows advantages in maximum illuminance, uniformity of illuminance, and flux efficiency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.24-30
• /
• 2007

Latching optical switches and optical logic gates with AND or OR, and the INVERT functionality are demonstrated, for the first time, by the monolithic integration of a differential typed vertical cavity laser with depleted optical thyristor (VCL-DOT) structure with a low threshold current of 0.65 mA, a high slope efficiency of 0.38 mW/mA, and high sensitivity to input optical light. Many kinds of logic functions (AND, OR, NAND, NOR, and INVERT) are experimentally demonstrated using a differential switching operation scheme changing the intensity of a reference input beam without any changes of electrical circuits.